Counting matching models…
This Helix Wind model has been modeled to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was developed to test…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
Based on different scientific papers I created this Savonius two blade shape wind turbine design. It is specifically designed to work well with low wind speeds coming from one direction. The turbine needs a obstacle wall in front of the…
Print approx. €6.51–€7.96 excl. taxPreliminary estimate for PETGSource material: PET
This is a soap box in 3 parts The grid is designed full, and i use a modificater in the slicer to make it filled with hexagons (20%), without any top or bottom surface.
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
in french below I designed this Fusion 360 soap dish to fit a 20mm diameter shower rod. I printed it in PLA with a 0.4mm nozzle. It can also be printed in PETG with a 0.6mm nozzle for more strength. What do you think ? The assembly is…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Salut , Voici une impression pour créer une bouteille à bulle de savon à partir d'une simple bouteille (Compatible avec les filetages "pco1810"). 2 pièces à imprimer et à coller ensemble J'ai créé une pièce "Validation_Filetage.stl" qui…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Simple design print and assemble.
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
This is a tool to assist with reinstalling the pistion back into the group head on La Pavoni espresso machines such as the Europiccola and the Professionale. It is designed to work with Millenium models (post 2000) not legacy models.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
objet multi fonctions :mediator ,pendentif et porte savon
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
boite a savon avec un poisson qui voudrait s'echapper
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET
If you like me have a Eureka Mignon single dose grinder and a La Pavoni coffee machine, you'll know that the metal doser is too big for the post-millenium 51mm portafilter. The doser adapter has been tested and works flawlessly, the…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
FR: C'est un porte-savon pour les robinet d'extérieur ou de garage, qui se fix directement sur le tube. Le porte-savon peut se défaire du bras pour être nettoyer. Diamètre tu tube min/max : 17mm/20mm 4 Vis M2 avec écrou, longueur des vis…
Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant
Le porte-savon de douche minimise le contact du savon avec les accessoires de la douche et rend le savon facilement utilisable.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…
Thanks to vladua for the great wind turbine. I enlarged the wind wheel to a diameter of 170 mm and a height of 196 mm and adapted it to my proven bearing for an 8 mm metal rod. The wind turbine parts can be put together without reworking,…
Maid of Favonius. Noelle. Genshin Impact.
Thanks to astfaellergerald for the Vertical Windturbine Ver. 2. I like version 2 (NEW P1-5) by astfaellergerald very much, but cleaning and gluing all the parts takes some work. I've been contemplating putting the top and bottom halves…
Print Settings As it is for outdoor used i reccomend using PETG. I used a .4mm nozzle and did 3 walls for a 1.2mm wall thickness. I used a 10% infill on all parts. the only part that needs support is the Blades , not for the blades…
A Savonius-type wind turbine you can connect to a Lego axle. It comes in 2- to 6-bladed variants. The blades are semicircles with inner and outer diameters 40 and 43 mm respectively. The middle is a circle with a diameter of 9 mm. The…
Simple Savonius wind-mill. Ii requires 2 bearings on top/bottom of support. Can be printed with small supports, 0.4mm nozzle and 0.2 layer height.
Bonjour, je vous propose mon porte savon ( 171x127mm ) pour colonne de douche diamètre 22mm . J'ai créé un système en “queue d'aronde” avec un jeu assez serré pour pouvoir régler le porte savon en hauteur sur la colonne sans que celui-ci…
I created this spoon to always have the perfect amount of ground coffee in my espresso maker. Print it in PETG to have a food and dishwasher safe coffee spoon. Print Settings Printer Brand: RepRap Printer: Mendel90 Rafts: No Supports: No…
Hello all, i like to make thinks by myself and this is my easy printable (without support) windturbine. its possible to put it up-side down on ballring: https://www.youtube.com/watch?v=kC9XH3xDmhc&feature=youtu.be All you need: one old PC…
Thanks to Lukass for the great wind turbine ... After the blue wind turbine broke on the struts in a gust of wind, I reinforced the rotor. The reinforced version has also weathered storms. For my installation situation I changed the…
Additional parts needed: 2x miniature ball bearing 8mm x 22mm x 7mm (eg. https://www.amazon.de/gp/product/B07HGXXX37/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&language=en_GB¤cy=EUR ) 4x screw M6x10 4x screw M6x16 8x nut M6…
In an attempt to scare birds from my garden and replace fu... cd at the moment they are suspicious to see how long it lasts material: screw M6 x 35 bearing 606ZZ (6 x 17 x 6 mm) threaded rod M8 windire: bearing 608zz (8 x 22 x 7) threaded…
Confirmed working. Update 05-11-2023 Confirmed working and slightly modified 29 mm version Update 31-10-2023 Added 22 mm base and corrected depths The Umikot adapted for the 49 mm pre-millenium La Pavoni baskets. It's the same size as the…
This is a fairly close copy of the primary speech module of an Avon S10 respirator. It's intended for cosplay, display etc, for example making a replacement in UV-reactive, glow in the dark filament, or a different colour to match a…
A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…
The tolerances should allow it to be used with needles that have the metal or the rubber handle. With needles that have a <20mm handle and a needle length of 40mm (without the handle) there is no need to cut the needles. The files contain…
Print with at least 4 perimeters. Not a lot of infill required (~10%). PLA worked fine for me. Increase printing temperature by 5-10°C for good layer adhesion. Category: Hand Tools
écoulement se faire parfaitement, le remplisage a 20% sufi tres bien
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
This dosing funnel attaches perfecty to my original portafilter from La Pavoni, doesn't fall when upside down, I can hear the click when attaches to the portafilter, very well adjusted for my printer/filament. I was considering to add…
Bonjour, Voici un porte savon ovale en deux parties. Sa particularité première est qu'il possède un drain permettant l'évacuation de l'eau ruisselante du savon après utilisation. L'eau va en effet s'écouler par le drain grâce aux plans…
3 modèles de porte-savon - ovale - rond - rectangulaire. Impression en PLA - ABS - Flex Category: Bathroom
Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…
Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…
Here are two models of soap dish: a draining model with water drainage holes and therefore intended to be used in a shower or placed on the edge of a washbasin or sink the same model but non-draining, ie not equipped with drainage holes.…
J'aurais pu l'appeler le "Didier Raoult" (vous savez, la blague sur les savants de Marseille et les ingénieurs à Grenoble). Je modélise tous mes modèles de manière à ce qu'ils soient imprimables avec une imprimante à filament (FDM).
While official 3rd generation Pavoni Europiccola drip trays fit older models, they are too wide and wobble. User drgary from Home Barista forums designed a drip tray for 1st gen La Pavoni machines, but I found it to be too small, and left…
Link to new conversion nut that works with the new heaters on older machines. https://www.espressocare.com/products/item/la-pavoni-heating-element-flange-pre82 The removal tool requires m3 bolts to be slid into the holes on the tool and…
This is a set of lens rims for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. They should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. Support…
Bonjour j'ai fait ce porte savon par besoin. Il est aussi utile pour une éponge.
You should print one section at a time and lower the speed as the height increases in order to get a nice print. The best option for mounting this turbine is to secure the axle it will be placed on both from the top and the bottom. The…
Découvrez ce porte savons design en forme de nid d'abeille. Il permet de garder votre savon hors de l'eau pour éviter qu'il se consomme trop vite, et qu'il salisse le lavabo. L'évacuation de l'eau se fait par une petite gouttière qui…
Porte-Savon (LOVE) Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3
Easy to print soap holder ! 20% infill Print “goujon” x4 use support only for the grip (funny easter egg) easy assembly I use PLA for this project. Very strong :)
Un porte savon tout simple. Impression avec support
A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…
Specifically this is the portafilter that the model is designed to work with, although I do have a custom wood portafilter handle that may be a slightly different diameter from the stock handle. My handle sits flush with the counter when…
Porte savon ou porte éponge à imprimer avec support pour la partie inférieur. Permet une meilleure évacuation de l'eau. Soap holder or sponge holder to be printed with support for the lower part. For better water evacuation.
Modèle simple et efficace, resiste bien a l'eau et au poids du savon, peu être accroché avec du ruban adhésif double face, avec de la patafix ou même de la colle Simple and effective model, resists well to water and the weight of soap,…
3 modèles de porte-savon - ovale - rond - rectangulaire. Impression en PLA - ABS - Flex Category: Bathroom
Porte savon cylindrique pour un savon diamètre 70 ou moins. Imprimer sans support.
Support pour salle de bain, salle à manger. Support qui évite le contact d'un objet avec un liquide (savon avec l'eau pour éviter qu'il ne se dissolve). Il y a un écart de 17.5 mm dans l'hexagone. Il y a deux parties dans le modèle :…
Tamperstation für La Pavoni Europiccola zur besseren Vorbereitung und Tampern.
Little lever adapter for the La Pavoni Europiccola espresso machine that slips over the existing steam knob. Idea was to not have to fully remove the C clip to replace with a different knob/lever and just slip it over the top of the…
Support pour savon qui se glisse sur paroi de douche de 6mm d'épaisseur Holder for soap you can attach on a shower glass of 6mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 15%…
Tamper station for post millennium LaPavoni portafilters. There are three versions avaliable: Standard - Pictured (Height 65mm): The basket is slightly protruding above the upper surface Flat (Height 60mm): The lugs sit flat on the rim of…
Just made a longer (150 mm) handle of oryginal model. Printed with PEDG, 0,2mm.
My scale has always slipped on the drain grid and I wanted to avoid touching the hot boiler. Therefore, I designed the drip grid, which holds the scale in its position. Accordingly, uses filament which the temperatures can well withstand.
porte savon avec effet nuage Trouvez le sur Thingiverse ! Visualisez-le sur Sketchfab . Si vous aimez, merci de laisser un "J'aime" ! PARAMÈTRES D’IMPRESSION 3D Pas besoin de support. j ai trouve ce modele sur le site cults 3d
Ein passender Tamper für die La Pavoni Europiccola und andere Maschinen ab 2005 mit passendem Durchmesser 51,5 mm. Gedruckt in ABS, sollte aber mit jedem Material funktionieren, außer natürlich TPU.
You will be surprised at how stubborn of a grouphead sleeve this will be able to remove. (some WD40 left to sit for an hour also never hurt anything) I printed on Prusament PLA with 4 perimeters, and increased temps from 230 to 235 C for…
This is a port cover for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. It should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. They fit slightly loose,…
A wind turbine with a vertical axis of rotation. It's best to print the model with supports, but it can also be printed without them. One of the faster models, wall 1, 5% infill. To be mounted on a rod without bearings.
You'll want to use PETG for this print as PLA will warp over time. 15% infill seems to work fine.
Funnel for newer LaPavoni Europiccola models. Fits on 52mm inside / 59mm outside portafilter The Tamper can be used with the Funnel No support needed printed with 15% infill and layer height 0.15
Porte Savon avec accroches. Dimensions : 120 x 80 x 37
Very simple tamper base station for the 49mm & 51mm naked-portafilter for Olympia Cremina and La Pavoni. It has just enough height to clear the portafilter handle from the ground and keeps it level even when not filled. Now parametric…
petit porte savon avec skyline de NY
Porte savon clipsable sur colonne de douche de Ø22 mm.
Trichter für ein Sieb der post millenium Brühgruppe mit 52 mm. Der Trichter liegt über der Wölbung auf. Category: Household
This is a remix of Hooptey's VAWT which can be found here: https://www.thingiverse.com/thing:85168 LowerMotorMount07 makes it easier to use various size motors and it has a pass-through for wiring. MagneticBase08 holds three small…
porte savon en 2 parties a coller . facile a imprimer coller les 2 pièces a la super glue pour savon de 80x47mm trous d'évacuation de l'eau et surélevé Category: Bathroom
A sleek case for Arduino UNO R3! Perfect build for TIG-00 and TIG-01 games control. This model is part of this .
Sinterklaas Voor de feestdagen heb ik deze schattige Sinterklaas ontworpen om volledig 3D-printbaar te zijn. Het model bestaat uit eenvoudige vormen, stevige details en is ideaal om te printen in meerdere kleuren. Perfect voor printers…
You can use this tool to swap the filter plug on your Avon mask from one side to the other, etc. Designed as a replacement/backup/cheaper alternative to Avon's $30 piece of plastic:…
Pour pousse mousse intégré dans le plan de cuisine
Bonjour voici mon porte savon imprimé en 3d pour éviter que ca ne coule sur votre lavabo.
This makes removing a speech module from an S10 easy. Use with a 1" spanner, adjustable wrench, or just your fingers. The module will then pop out when pushed from the rear. I found using a flat screwdriver at the edges effective. If you…
Note d'impression Aucun support nécessaire
New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…
Boite a savon avec ou sans texte- Soap box with french text. Haut_Texte est prévu pour impression multicolore à plat. If you download it, please like.
Porte Savon avec trous pour ecoulement de l'eau
Fait avec PLA, remplissage a 50% et la fixation remplissage à 100%. Fixation avec vis M4.
Half SA (HSA) glagolytic alphanumeric keycaps. The legends are inset 0.4mm into the keycap so are “double-shot” in a sense that they will practically never wear out. Printing instructions: Print both top and bottom with a layer height of…
This is for a 49mm portafilter off of a Pre-Millenium La Pavoni Europiccola. I hung it to the wall with some double-sided tape or command strips. Simple and effective.
It is still an ongoing project.
This is a WIP Savonius modular VAWT concept. It uses an N20 reductor motor as its generator ( example ). And a nail as part of its top shaft. Other than that and whatever youre mounting it with it is fully 3d printed. I recommend using…
Piet Voor de feestdagen heb ik deze schattige Sinterklaas ontworpen om volledig 3D-printbaar te zijn. Het model bestaat uit eenvoudige vormen, stevige details en is ideaal om te printen in meerdere kleuren. Perfect voor printers zoals de…
![OpenVAWT Savonius Modular System [WIP]](https://media.printables.com/media/prints/1134438/images/8560534_c81a6a61-1cd7-4807-81be-2829967d1454_18775bf4-4b1a-44b6-9a0d-df1c88d1f3c8/photo_2025-01-04_21-48-18.jpg)
