Counting matching models…
Modification of Deburring Tool Case 154mm (Libraton) - Rugged Box Style to fit NB1100 deburring tool. In this remix you can find part to fit NB1100 deburring tool to fit to original box made by user @Shadow_1242354 . You just need to…
Print with support sadly and 100% infill to give it rigidity.
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
This is a Honeycomb Storage Wall mount for DeWalt DCB112 Charger. The three hexagons on the back are meant to go into insert-empty.stl and on to your Honeycomb Storage Wall. I printed at 0.3 layer height with support from build plate…
I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…
Cap for NB1100 type deburring tools. Works with the standard BS1010 blades, but - thanks to the notch in the cap - it should fit all commonly available blade types. The cap is secured by two clip noses which grab the grooves at the upper…
Multiboard push in style mount for DCB112/115 (center to center peg spacing of 114.3 mm). Included the STL and STEP (with parts split) file if needed for modification.
This is a DCB115 mount for Multiboard. Requires two " 13mm Big Thread, Flat Head bolts " to mount through the mounting holes. Printed with 3 walls, 20% infill, and supports enabled for the tops of the mounting holes. Feels very sturdy and…
Changed my design to use the Sy's peglock system which is better pegs and more modular
I recently bought a deburring tool and it looks super dangerous to have an open blade like that, so I designed and printed a protector cap to safely store it!
Super-simple, minimal bumper for ST Nucleo F4* / Nucleo 64 MB1136 boards.
Just a quick remix to mount my DCB118 on my skadis charger board
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
The NB1100 Deburring Tool & Blade Insert for Rugged Case is a practical solution for securely storing and organizing your deburring tool and blades. This custom-designed insert set features two pieces: one to hold the NB1100 tool along…
Multiboard mount for the Dewalt DCB113 battery charger. Printing instructions: Support: YES Type: Normal(auto) Style: Snug Remember to remove the tiny bits of support before use :) Additional components required: 4 x Multiboard Drop-In…
Bugatti EB110 SS Speciale, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
15% infill no rafters no supports
DeWalt 20v battery charger DCB112 mount for Ikea Skadis board that uses T-Clips to securely fix it to the board. This mount also secures the charger with the raised bottom holes to prevent it from detaching when removing the battery.
Used to mount Dewalt battery charger DCB112. Requires: Heavy duty snap: https://thangs.com/designer/Multiboard/3d-model/Heavy%20Weight-Bearing%20Hook%20Snap-1130430 Mid Hole Bolt:…
Here I combined the best files to print a case for the NB1100 deburring tool and bits. I also made a top cover with an outer contour that resembles NB1100, so now it's a perfect home for your deburring tool :) To assemble it you will need…
As a Airsoft club we got us some E&L AKsu's and ordert for them B11 Rail mounts made by Begadi/5ku… the problem is that there is a 4mm gab between the Body and the B11 so I made a Spacer to fil the gap... what we saw was that each replica…
Smoothened version of @MarekZitka NB1100 deburring tool holder insert
Design inspired by similar wall mount for Makita . Consists of two equal elements. Printed on side with no supports. I used 3 walls and 20% infill. Once you put both sides mark and predrill bottom via bottom holes while charger is on,…
Multiboard mount for the DCB1104 DeWalt charger.
It can be printed on "smaller" 3D Printers, as it is devided in left and right parts. More information regarding the display can be found here: https://www.panelook.com/B116XW03+V0__11.6__overview_376.html This is the LVDS Controller I…
Voici des insignes de portières à coller pour les camionnettes Renault B80 B90 B110 et B120 réalisées en m'inspirant des photos et d'une insigne d'origine
AI made Aston Martin DB11, I have both OBJ and STL files loaded for you guys. Don't print without editing wheels.IwlEdt
Widened the original model and moved the screw pegs to suit DeWalt DCB118-XE charger
DeWalt DCB115 charger mount for Ikea Skadis board that uses T-Clip s
This is a charger mount for the DeWalt DCB115. It uses 13mm Small Thread bolts to attach to the tiles. The lower pegs seat into the screw holes to keep the charger from dislodging when removing a battery. Category: Models
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT Battery Charger clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the key…
Tamiya Clod Buster / Bullhead B11 part reinforced for better durability.
9.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 10" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 267mm x 79mm overall print size. Includes files for a…
This Honeycomb Storage Wall mount is designed specifically for the DeWalt DCB1102 charger, which features 51 mm (2") spacing between its upper and lower screw mounts. To ensure precise alignment, the design includes two different pins…
This Aston Martin DB11 scale model stl is a realistic 3d printable car model for display and diorama building. Use it for car collector displays, desk and shelf decor, model vehicle collections, and custom tabletop dioramas. The file is…
This is to add a single DeWalt DCB107 battery charger and cable management to your Klein ModBox. This will be a two part print if you want both options or you can print one or the other. (PICTURES ARE FROM DCB107 DESIGN) Hardware used: 4x…
This is to add a single DeWalt DCB112 battery charger and cable management to your Klein ModBox. This will be a two part print if you want both options or you can print one or the other. (PICTURES ARE FROM DCB107 DESIGN) Hardware used: 4x…
Aston Martin DB11 AMR as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Replacement foot/stand for a Genius keyboard KB115. I made it using Prusa slicer by remixing original from thingiverse with positive and negative volumes. Since I adjusted pegs on the side, I do recommend using supports for these, since…
Dark Sky B11 Candelabra Glare Shield designed to place on top of a B11 Candelabra bulb to meet DarkSky International requirement of zero uplight and shielding of bulb glare. NOTE: Use only with LED bulbs. Print in minimum PETG to…
This layout was designed to hold 1 of the B11 style candelabra bulbs in each gridfinity square. The spacing is very similar to the small boxes that I receive when purchasing the bulbs. Now you can screw each new bulb into its own socket…
Acer TravelMate TMB118 adapter
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
9.75" x 3.25" Storage Bin Divider. Fits horizontally(side to side) across bin 10" wide X 4" high. Doesn't fit perfectly as it's flat on one side, but locks in place and does the job. 267mm x 79mm overall print size. Includes files for a…
I designed another wall mount because other ones I saw had too much vertical play when removing the battery. This model has pegs that lock into some recessed screw holes to prevent vertical sliding. 15% infill with PLA was flexible enough…
More info: https://www.bricklink.com/v2/catalog/catalogitem.page?P=3068pb1112#T=C&C=1 Hang on the wall with this stud: https://www.printables.com/model/1189084-lego-stud-for-hanging-2x2-tile-artwork
This is a charger mount for multiboard. It attaches using 13mm small thread bolts. There are bottom pegs to seat into the screw holes to keep the charger from dislodging when a battery is removed. Category: Models
This is a charger mount bracket for the DeWalt DCB1102 Charger. It has 2 4.5mm Countersunk screw holes, and the mount arms are not tight to the charger, allowing for easy removal to use or take the charger elsewhere. Only tried with a 2.0…
Printed in Bambu PLA Matte on an X1C on the “strength” preset (but probably not required). Plenty strong. Mount it to the wall with drywall screws. Put a couple of #6 x 1/4" screws into the holes in the bracket. Slide the charger over the…
Lets you get a DeWalt DCB115 battery charger off the counter; it may work for the lower power charger too. I'd recommend orienting the print so that the smaller bottom side is on the bed, so that the layer lines are strong for the charger…
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
A very basic design that converts an empty 2DIN/Double DIN frame into a useful storage cubby. This was designed to be installed without a metal radio cage in place, purely just the black dash trim. It has a hole in the corner of each…
This is not an original Honda part or replacement for one, it is a custom part for better mounting of 20mm wide straps that end in a loop on the Honda CB1100. Make sure you have good layer adhesion and test the print, don't blame me for…
he Bugatti EB110 is a mid-engine sports car produced by Bugatti Automobili S.p.A. from 1991 to 1995. It features a quad-turbocharged 3.5-liter V12 engine, all-wheel drive, and a carbon fiber chassis, delivering impressive performance for…
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a simple print that allows you to hang your Dewalt DCB-1108 charger to your Multiboard. Declutter your work environment and…
