Counting matching models…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
BB8 From Star Wars. Few different versions. the M just means I did some offsets in meshmixer
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. Bricks are broken down by their hex color for…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Remix of my previous submitted Xfinity XB7 Gateway Router for the new XB8. A left and right side model is included.
Hi all here is my BB8 puzzle to go along with the R2-D2... enjoy You will need supports for the head, pin3 end and pin4. every thing else works without, some light sanding might be needed if your printer cant print arches/bridges well.…
1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…
The cap slides in at the bottom of the model. If you put something heavy in the cap and put it on it stands right up.
Design is from Daniel Lilygreen (https://www.myminifactory.com/object/3d-print-star-wars-the-force-awakens-3832) based on it i scaled it to 15% (about 12 cm ball size) and sliced it for 0.4 and 0.6 nozzle size, have fun!
Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…
I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…
I combined 3 projects to create the ultimate spinning top! You will find various versions of spinning tops, print the one you prefer! There is also a version that mounts a bearing inside to make it weigh more and with a steel ball on the…
For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount
This is a Converted model from SketchFab, it is a 2019 Volkswagen Passat B8, I hope you enjoy the model. Link to original model: https://sketchfab.com/3d-models/low-poly-volkswagen-passat-b8-de203c04b4da40c8beb9a460ffe3eb7e Happy printing!
I designed this thing so I can mount the magnetic carholder lower down the central console. This keeps it away from my view but still easily accessible. My USB charging ports are also in the ash tray area, so the cable does not have to…
Arris Surfboard SB8200 Rack Mount Enclosure I wanted to rack mount my SB8200 but in doing so and placing it between 2 pieces of equipment it would overheat as it is passively cooled. So I set out to design an actively cooled rack mount…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script and use a prime pillar Category: Keychains
F1 Red Bull Racing RB8 2012 Wall Art Silhouette model. Adjustable size. I acept model suggestions.
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
Schlüsselanhänger ist mit Materialwechsel zu drucken. Keycheain is to be printed with material changes. Schichtdicke 0,10mm / Layer 0.10mm Infill 15 % color change at 1,10
Star Wars BB8 headphones stand Prints in two parts and slots together Backplate is thin so it looks good backlit @3DPrintBunny
A fun propeller launcher! I remixed two already quite good and functional objects to create an even better and more functional object! I recommend printing everything in PETG for greater flexibility and component strength. The rope and…
Vent gauge pod for Audi A4 / S4 (B8 / B8.5) for 52mm gauges. Install location is the left center vent.
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- I made this stand to put the BB8 I downloaded from here If…
AUDI A4 B8 Car silhouette model on a stand! It's perfect as a desk decoration. The model includes a set consisting of a car silhouette and a stand. The car silhouette and stand are also available separately in the print profile.…
When the car isn't born with cupholders in the rear seat armrest and your passangers want to enjoy a cold drink an not hold it all the time, a cupholder is the obvious fix for that. I couldn't find anything on the itnernet that would fit…
This is a speaker adapter ring that fits the dash speakers in Audi B8 models, such as A5, A4, Q5 and so on. These are designed around the Dayton Audio RS75 3" speakers. The side rings also includes a holder for the original resistors.
Will fit most Arris Surfboard Models (8200, 6141, etc). Complete re-design to fit the SB8200, re-measured, redesigned, and printed at least 10 different versions to ensure a nice fit on my own SB8200. Hopefully this fits better than…
Modified from the original: Slots to allow for the terminals to pass through easier. M3 recessed nut cutouts for mounting the speaker driver. Category: Automotive
UPDATE 27th oct. '24 Toms Puķītis asked me to make a version without the TP-mounting. UPDATE 13th Oct '24: (v3.9) slightly higher box, three mm more height on the inside. UPDATE: aug, 27th '24 After testing, multiple updates, many…
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
Simply and fast printing wall / under mount for your Arris Surfboard SB8200 modem
Spinning top compatible with B8-Lab launchers, No support required! Check out the other spinning tops on my page :)
Dual phone holder for the werid (coin?) tray behind the auto-hold and handbrake in a Passat B8. Phones lie down at an angle with ports sticking out where you can easily plug in cables. Has slightly different width slots which were sized…
Recommend using PETG for better thermal resistance and flexibility. Support are needed: Left side is not remixed. You can take inspiration from the right and remix it. Thank you :-).
Edited & removed second screw to have more empty space. Now fits Sanwa RX482 better. MyLaps Transponder fits as well. Includes soft cable glands too (Must print with soft TPU)
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
I wanted to have a bit more space to mount electronics in my Xray XB8E 2022 buggy. I designed this battery tray which can be mounted with longer M4 bolts. The battery of “shorty”-size is held tight in place in a centre position, so not to…
Muss aus FLEX Material gedruckt werden. Zum installieren müssen die zwei kleinen Plastikbolzen aus dem Tank-Schraubdeckel heraus gedrückt werden. (nach Möglichkeit nicht verlieren :-) ) Danach die neue Schnur hinein schieben und die…
Print with a brim since it is a tiny print, and it is good to add more clips to the print job. I've printed them in PETG, and they have held up really well. Very happy with the result. It should also work for other car models/brands, I…
use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…
EBB36 Mounts for my Dragon Burner 8 with WristWatch G2 Extruder
Hi, I modified ' Piketooth ' pad spacer model to fit Large 20mm SRAM brake pads. I only tested it with my SRAM DB8 model and it fits great (in my opinion more handy than stock black spacer that came with the brake). I think it will also…
The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%
IMHO best to print these (you need two) out of PETG as this is less brittle then PLA
Holder to mount an iPhone magsafe charger to the VW Passat b8.
Fits this and probably similar motherboards
I printed it from resin but PETG will work too. Use seals from orginal one and use supports. Happy Printing!
I have printed it in ASA Prusament on the SATIN sheet. PETG is probably also suitable. 0,4mm nozzle 0,2mm quality settings Glued together with super glue (CA glue) after printing.
This are the mounting brackets needed to make Ham Radio Passion (LB8IJ) Yagi antennas. These are lightweight portable antennas made out of 10mm square aluminum tube as boom and 6mm aluminum pipe as elements. The following video shows how…
This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive
Cups for BB86 BB install. Includes 41, 30, 29, 28, and 24mm cups, as well as a parametric design that can be altered for other sizes. Cups are labeled for their bearing size (ie the 24 mm cup works with GXP bearings, though measures 23mm…
This splitter allows you to divide the sunglasses tray on the VW Passat B8 in half to get two pair of sunglasses in.
Prostě klipy na vymezení vůle na upperplatu. tisknu z PETG
Who doesn't like BB8? This is a 2D picture, each color printed at different layer height. Didn't print it yet, only have orange PETG, rest of the colors I have in pla.
It started when i needed a place to put my phone in the car when linked to carplay. looked for something on the internet but what i found didnt fit well in that space so i ended up making a holder to fit in there flush and painted it in…
Upgrade your workspace or garage setup with the Fanttik NEX B8 Ace Wall Mount , a durable and sleek storage solution designed to perfectly hold your Fanttik NEX B8 Ace Duster. This wall mount ensures both stability and convenience,…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
Its already been a couple month I install it, if my memory is good, it was really tight. its the only pic a have, its clip from behind
The model prints with support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
As there discontinued I was lucky enough to get my hands on the last one available. Toyota Part Number: 90010-22031 or 9001022031 | S/S 9001022030 or 90010-22030 Pioner Part Number: CXB8282 (HL15)
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
printed at 100% fill + 0,1mm layer, 0,4mm extruder, PETG, print wiht base supports, works well
Voici des insignes de portières à coller pour les camionnettes Renault B80 B90 B110 et B120 réalisées en m'inspirant des photos et d'une insigne d'origine
Model of the Audi emblem for the engine cover of the Audi A4 B8 (TDI version). Print using a temperature-resistant material such as PETG or ABS. For mounting, use double-sided tape or heat-resistant adhesive. Model dimensions: 163 x 56.24…
The Realtek AMB82-Mini outclasses the typical ESP32 boards used for printercams, with a better camera and faster CPU, more reliable software and a more powerful and featureful board overall. After I added a printer riser with plenty of…
Clips that fit 4mm axles, used in an 1/8th offroad buggy ... but other will too. The clip provided has a thickness of 2 mm but can easely be scaled down or up by altering the Z-value in the used slicer. I use these in my Xray XB8E I…
3D Printed Speaker Enclosure for Visaton B80 Chassis based on the "Klang und Ton" “Björn” Concept. I saw the building instructions for this initially in the magazine “Klang und Ton 2012/1” and adapted their concept to 3d printing. I…
This is for the Xfinity xb8 modem to allow it to be mounted to the wall instead of sitting on a desk or on the floor. Be sure to use support tree!
Printing height 0.2 mm with nozzle 0.4 mm
Simple wall mount shelf for a Motorola MB8611 cable modem. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: any PLA any Category: Organization
Scatolina per la scheda PCB800869 EDP 30Pin PCB800869 EDP 30Pin Board Enclosure Category: Other
This is designed/remixed to specifically hold the Arris Surfboard SB8200 Cable Modem and adjusted the pieces to reduce the flexing seen in other prints for this modem. Specifically, the tolerance causing the face of the mount to push…
Náhradní upperplate pro XB8E. tisk z PC výplň tak 40%
Wishbone for repairing broken rear ventilation slider after hitting the slider with something. The wishbone usually breaks or disappears inside the ventilation tube. The slider is somewhere on the floor, just try to find it. You need to…
They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.
This tool is a perfectly snug fit to safely remove fuel filter on a Kubota Loboy Diesel Generator and B8200 Tractor without damaging it. 3D PRINTING SETTINGS 0.15 100% Infill PETG
Small decorative BB8 with a base so it can stand. Made with Onshape
Jednoduchý sešikmený držák klíče pro Passat B8. Vybrání pro prst na spodní straně. Připevnit lze dvěma vruty s průměrem 3,5mm.
A minimalist Snapmaker U1 Bin Adapter for Sterlite 58QT (2248LAB80F). I believe the bin was $7 or so at Walmart. Uses the existing rubber grommets that came with the U1, and friction fits into the unit. The STL uploaded here has all four…
This is a remix ( https://www.thingiverse.com/thing:5362441 ) to mount an AliExpress Samsung Fold phone holder ( https://www.aliexpress.com/item/1005005844361734.html?spm=a2g0o.order_list.order_list_main.10.38d91802kzDr2d ) in a Passat b8.
Speaker mount for mounting 6.5" drivers in the front door of an Audi A4 B8. The holes are intended for M3 4mm heat inserts. There is also a test fit piece, I recommend printing this one first to check if the holes will line up with your…
Background In my hunger for more time to operate portable, I'm always on the lookout for new ways to save time. On more than 90% of all my portable operations, I use this Chinese Ground Plane Vertical Antenna. As it is easy to carry,…
May the force be with you. Prints as separate pieces so that the heads of the droids act as the DJ Knobs.
The holder is printed in three parts, without support. Originally I wanted to use ASA or PETG, but due to warping I had to change to PLA. But the angle holders are printed in PETG. The parts are connected with M3 screws, the angle holder…
Like Bryan Crow I wanted to rack-mount my Arris Surfboard SB8200, but I don't have a full-sized rack only a 10" mini-rack. Since his model is designed to be assembled, I redesigned the front-plate to be a one-piece mount appropriate for…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
However, when servicing your hydraulic brakes, it's very common that a single piston is stuck or coming our easier than the remaining ones. This causes a "spongy" braking feeling and wears pads out unevenly. To solve that problem, you…
Nárazník pro XB8e. Doporučuji tisknout na výšku s 3-4 perimetrama a materiál PC
Držák středního diffu na xb8e. Tisknu to na 0,1 PC blend. Závity pro rouby je lépe udělat nahřátým šroubem nebo závitníkem.
Since the design of my Screwdriver holder is going really well, I wanted to expand on other tools as well. First the Flashlight an now the chinsel holder. Hopefully you need it as well. If you want you can add a heatinsert for more secure…
This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…
Easy to print inline skate keychain! Keychains inspired by very popular inline skates Check out other keychain designs on my profile!
Print pin in pla or petg tower and bumper in tpu
Model Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 swap to Grey At layer #15 swap to Blue At layer #19 swap to White
