56 models
In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…
UPD 13.05.24: Models of X-spacers have been corrected, Y-spacers have been added. Spacers in the X and Y axis are installed between the pressure plates and bushings, in case you want to get rid of the play that is felt if you shake the…
This is a printable version of the Openbuilds anti-backlash TR8 nut block - https://openbuildspartstore.com/anti-backlash-nut-block-for-8mm-metric-acme-lead-screw/ How to use: mount where it needs to go loosen all screws insert leadscrew…
EDIT: Added a hexagonal version which should be easier to grip to tighten. I was using a standard TR8 nut and leadscrew in my CNC machine and found it to have tremendous backlash. The typical solution is to use an anti-backlash nut which…
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
This compound planetary gearhead is an anti-backlash version of my earlier Robot Actuator (smallest version): https://www.thingiverse.com/thing:3293562 It has about 50% more torque, significantly less backlash, and also runs more…
This linear stage is a remix of the original design found here: https://www.printables.com/model/453719-linear-stage-updated/comments/1708600 I've done a few things to make it more usable: Improved the durability of the lead screw by…
Mount to use an Openbuilds or Delrin Anti Backlash Nut on the Y axis of the 3018 CNC. I designed it for the three different heights that are quite common and normal. This means that your Y axis has 0 play
Modification to allow for backlash nuts on the Bear X Axis. Backlash Nuts Used : https://www.amazon.com/gp/product/B08JTMV8D7/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 The standard Backlash nuts sold on sites typically have the…
The carriage has a short and long side (around the pulley) end of belt - if there is a difference in the gaps left and right side. Your belt is too elastic or broken. Or there is too much resistance. This backlash will causes problems…
This anti backlash nut is based on a previous design and nuts I bought for the HyperCube Evolution (see these nuts in the custom bracket I created here ) This update includes some grooves in the main part and some counter fitting edges in…
This gear is designed with one specific purpose to get rid of insane backlash of original(and it's copies) 12t gear when it's meshed to gear rack without introducing too much friction, so servo-steering on RC sets/MOCs repeats servo angle…
I really liked the idea of the original model (https://www.thingiverse.com/thing:3222461), but the screw shape was not compatible with the TR8x4 leadscrew used in Anycubic. Using this model (https://www.thingiverse.com/thing:2246502) as a…
Holder for T8 anti-backlash leadscrew nut with holes for 2040 profile
Náhrada trapézové matice pro posun podložky CNC3018, tisknuto z PA12 - nylon. Pro montáž jsou zapotřebí šrouby M5x40 - 2 kusy, podložka pérovka 2 kusy.
The original design could accommodate a slightly modified anti-backlash nut but in the wrong orientation (wrong orientation has the spring supporting the weight of the gantry). This is simply mirrors that part for the correct orientation…
UPDATE see: Improved Anti Backlash Nut in OpenSCAD This anti backlash nut is based on nuts I bought for the HyperCube Evolution (see these nuts in the custom bracket I created here ). Note that an updated and improved version with less…
Almost completely eliminates play on the X axis. The anti backlash nut is so compressed that it no longer has room for play
Same as the E3CNC RODMOD but with zero backlash nuts, similar to the Milo CNC.
Adjustable anti-backlash adapters for the X and Y axis on the 3018 CNC. Y axis fits stock set up. X axis fits with upgraded Z axis and MGN12H adapters. See my other files for those.
update Jun 29, 2025: uploaded new step file will all models. Moved mounting bolt nuts for additional strength. Changed backlash nuts to nylon insert lock-nuts and moved them for easier adjustments. Added Oil/grease passages. BOM: 12 M3…
Since I did not find any version of Dremel CNC that would be ready for intallation of anti-backlash nuts (they are bigger and longer than simple lead screw nuts), I modified some designs I liked and here they are. There are holes for…
just print the new stl with originals parameters and replace it.
I have a couple of Dollo3D printers that I've been building and developing for a couple of years. I've used both of the quite a lot for printing mostly functional parts that aren't too tight on tolerances. But recently I started noticing…
The gearbox is designed for high loads loads and with the two tapered roller bearing can handle very high bearing loads in all directions. Though the gearbox can be fully 3d-printed, I recommend using JLCCNC for machining at least the…
One part is based on this https://www.thingiverse.com/thing:5198158 but i found it too much rigid to work properly, and it gives some movement impediment. The 4Max Pro 2.0 has a problem in Z axis. It results in imprecisions during small…
Upgrade the standard POM Nuts to Anti-Backlash Nuts. Designed to replace the Z-Axis Y Strengthening brackets on the bed assembly. Includes the Bracket for mounting the IR Sensor to the Bed assembly. Print with your favourite thermoplastic…
Here is a suitable improvised anti backlash nut for the sovol sv06. There is not much clearance at the top of the sovol between the z-axis stops and the bridge (24mm). Finished antibacklash nuts are too long. (I didn't find any suitable)…
Bear Extruder Motor and Idler part for Chinese TR8 Anti Backlash. Model is for MK3s 1st Version to test. Category: 3D Printer Parts
Based on this design https://www.facebook.com/groups/122568018406103/permalink/326518334677736/?comment_id=326521478010755 , I made my own anti backlash nut mounts, since it is next to implossible to hold the nut in place while mounting…
I've noticed the pneufit connectors have backlash when retracting, I designed this small clip to prevent this. Instructions Print the clip. Insert it between the brass connector and the blue thing like you see in the picture. Enjoy a…
voron legacy antibacklash nut
I added anti-backlash nuts to the X axis of the remix that HyperRC did - https://www.thingiverse.com/thing:3765468 Example anti-backlash nut:…
Redesigned D-Bot Lead Screw Bracket using Zyltech Anti-Backlash Nuts. Uses same bolts, nuts, and washers as the original D-Bot bracket. Based on https://www.thingiverse.com/thing:1860005 by TheLost Category: 3D Printer Parts
My own requirements were: No need to reprint existing parts; No loss of printable space; Use of the PLA property for the elastic force required for the system to work; Easy installation; I think I've made it work... ;) 01-09-2015 Update…
Backlash is almost nonexistent in belt-driven systems, making a belt reducer a very good option for precise applications. This system uses a T5 belt-pulley mechanism, which is much easier to print than a typical GT2 system. The total…
Real simple redesign to extend this for the Eryone Thinker to clear the circuit board on the extruder side of the gantry, also add a top ring to make it easier to align. Hardware required was 12 M3x16mm (12mm may work) screws and some…
Bracket that allows Z-screw nut to be adjusted in X and Y directions. Works with stock nut or Anti-Backlash replacement. Locked-Down: Print the bracket and 2mm washer. Slippery X: Print in PETG for less friction. Sand contact surfaces. If…
T8 lead screws are great for improving your Z axis movement, they are really precise and its trapezoidal profile creates a smooth operation with little grease. The best part is the T8 anti backlash nut since its clever system gets rid of…
I had an Anti-backlash kit that was not compatible with my Oldham couplers. Even though I had them both installed, it was not perfect. I decided that I needed an adapter to use both properly. The adapter wraps around the top of the Oldham…
The default mounting bracket houses a 10 mm (at the hub, 22 mm at the flange) trapezoidal nut, the POM anti-backlash nut I received is considerable larger (20 mm at the hub, flange is about 36.5 mm), therefore I have redrawn the original…
The original file was provided specifically for Lerdge iX custom aluminum profiles, so I modified this part. It can currently be used with ordinary aluminum extrusion 2020. At the same time, I modified the original round hole for…
Remix of Toolson's release r02 P3Steel X axis parts to be used with the "standard" TR8 antibacklash nut (22mm flange, 12mm spring, 14mm backnut flange). See related things for the full remixed X axis. This thing was made with Tinkercad.…
Remix of Toolson's release r02 P3Steel X axis parts to be used with the "standard" TR8 antibacklash nut (22mm flange, 12mm spring, 14mm backnut flange). See related things for the full remixed X axis. This thing was made with Tinkercad.…
anti backlash for ezt t1 - reduce the vibration of the printer arms and reduce noise as well portugues anti backlash para ezt t1 - reduza a vibração dos braços da impressora e reduza o ruído tambem (nos comentarios tem as fotos da peça)…
English description below Ceci est un petit remix de la modification publiée par Petit_Homard_Breton pour la Dagoma DiscoEasy 200 Il s'agit simplement de couper une partie de la fixation de l'axe X (coté moteur) qui empèche la tête du…
A friend was looking at using these for a Prusa I3 build and did not want to use the precision threaded rod and wanted to stick with all thread like in so many other printers. Instead of printing the nut adapters that replace the brass…
The dual extruder mount interfered with the anti-backlash nut that I had installed, so I reduced the wall thickness in that spot and removed the vents from that area as well for strength. I printed this out of ABS as the stepper motors…
modified version of my other mount but with a longer threaded rod nut hole for an anti backlash setup using two nuts and a spring i havent tested it, the hole might not be deep enough i modified it and now the hole is an inch deep…
Spool holder with backlash cap to prevent filament form coming loose and slipping over the edge of the spool. I found that during rapid printing the filament would sometimes be rapidly jerked casing the spool to over rotate and the…
Hemostats (to install without disassembling the gantry) Two M5x10 screws (adapter to gantry plate) Four M5x3 nuts (adapter to gantry plate and nut block to adapter) Two M5x16 screws (nut block to adapter) Two M5 lockwashers (goes under…
Adjustable anti-backlash adapters for the X and Y axis on the 3018 CNC. Y axis fits stock set up. X axis fits with upgraded Z axis and MGN12H adapters. See my other files for those.
Hemostats (to install without disassembling the gantry) Two M5x10 screws (adapter to gantry plate) Four M5x3 nuts (adapter to gantry plate and nut block to adapter) Two M5x16 screws (nut block to adapter) Two M5 lockwashers (goes under…
The original file was provided specifically for Lerdge iX custom aluminum profiles, so I modified this part. It can currently be used with ordinary aluminum extrusion 2020. At the same time, I modified the original round hole for…
This is an anti-backlash nut adapter for the Ender 3. This part adapts the mounting holes on the Ender 3 to a cheap two piece brass anti-backlash nut with a round flange with holes for mounting. The anti-backlash nuts can be found on Ebay…
