Counting matching models…
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Bandana Waddle Dee, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
This model is compatible with the lego system.
This model is compatible with the lego system.
A simple clip to secure elastic bandages used to heal sprains. Printed in PLA with 100% infill and adaptive layer height.
A Pokemon figure of Zygarde Complete form in the style of Bandai finger puppets. This figure was designed for a commission. If you would like to commission me to design 3d printable miniatures you can do so at my Etsy store.…
Recommend printing on it's side with text upright.
Hi 3D printing friends! This design is a replica Band Aid I made just for fun. I had a crack on something that I didn't intend to repair and I thought this would be a funny way to cover it a bit but also draw attention :) You can heat up…
A holder for my Hornbach packing tape dispenser designed for the IKEA Skadis board. It will likely also work with other brands or similar tape dispensers. You will additionally need two of the following hooks:…
Ein 200 mm langes Massband wird sauber aufgerollt. Die Spindel ist leicht drehbar, das Band kann einfach aufgewickelt werden. Der Aufroller wird in einem gedruckt. Die Mechanik befindet sich im Boden. Auch ein Massband mit 2,6 mm dickem…
12/17/2023: Band-Aid/ bandage container V2 This is version 2 (V2) of a container to store bandaids. This specific one holds about 17 bandaids in each slot before it starts to get a bit tight, but you can increase the height of the model…
A print in place box for storing bandages of various sizes while traveling. Internal dimensions of 125mm x 65mm.
Portachiavi multifunzione: oltre ad essere un portachiavi funge anche da porta cerotti e porta pastiglie così da poterli portare sempre con sè per ogni evenienza. E' formato da 3 “corpi”: Il primo rappresenta un cerotto; è forato in modo…
Testing my cad skills with this one. Two versions of the file one .3mf is “generic” and can be used with any single color printer, or a MMU as each letter and the bandaid is it's own model second .3mf “bambu” is for Bambu printers with an…
This model is compatible with the lego system.
Stand with imperial logo for the Bandai Death Star 2 / Star Destroyer model kit. Print instructions: Print at 100% infill No supports 0.15mm
A simple bandage box designed for a common size of bandages (100mmx40mm, ~1.5inx4in). Smaller bandages will obviously fit too. The smallest usable length is about 60-70mm (2.5in). Any width up to 10mm (0.5in) will work well. It holds…
It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…
Band-aid shaped Bandage Storage Box with Sliding Lid This is just a simple box shaped like a band-aid with a sliding lid to store your bandages in. It fits bandages 35mm x 105mm or so. There is a little extra length on the ends due to the…
This model is compatible with the lego system.
this model is thinked to be printed in parts. this need 3 bolts and screws or it can be glued.
Created to hide a big hole on the closet door size: 10x5cm
Update 05.20.2024: I have recreated the model in Version 2. It is smaller and simpler, no more gluing necessary, less material consumption. Additionally, I have integrated a ratchet function, for which the two additional (ratchet) parts…
Easy to print bandage roller, no supports needed. I recommend printing it with a layer height of 0.2mm. Not sure if it works with boxing hand wraps
BT-1 assassin droid from Star wars Darth Vader and Aphra comics head for the bandai model kit. remixed from Doesnotfempute on thingiverse's model. https://www.thingiverse.com/thing:4138475 i recommend printing vertical with a alot of…
This model is compatible with the lego system.
This model is compatible with the lego system.
Bandages are something that are easy to bring, but hard to find when you don't have. Be prepared wherever you go with this handy holder. STL files are designed to hold up to 5 Band-Aids 40mm wide and 95mm long. The tapered opening is…
I got tired of looking for the box of bandaids so I decided to build a “holder” to encourage people seeking bandaids to take only one instead of the whole box. I used double back tape to mount it on the inside of the cabinet door where…
Descrição do modelo 3D ✨ STL Oxum – Modelo 3D para Impressão 🌊 Oxum – Senhora das Águas Doces e da Prosperidade Leve para sua coleção uma representação elegante e detalhada de Oxum, Orixá das águas doces, do amor, da beleza, da…
A quick stl to assist with the application of tube bandages to fingers or toes. When printing it you may need to brim the bottom and I used a custom support in the middle to help with the bridging of the top piece. Also worth checking it…
When I was a kid, bandages came in metal boxes. Which was cool, because you could throw a small tube of Neosporin into the box and poof -- instant first aid kit. At some point, the bandage companies switched to flimsy cardboard boxes,…
If you're anything like me, you nick your hands all of the time pursuing this hobby, so a small first-aid kit with bandages and Neosporin is something that we should all keep handy. Although, I will admit that my hands are doing much…
it is not a fast print design & it is not heavy-duty. some 3mm port added on arch structure for your use MSC01 is optional but highly recommend put it for stability and easy moving. MSC05 for 6 arch set MSC06 for 3 arch set
This is a 3D printed lever to make an emergency bandage (similar to the so-called "israeli bandage"), which we call an "emergency compression lever" See our git page…
horse_bandages_for_horse_schleich
This model is compatible with the lego system.
I simply erased the hooks and added two large holes on each side for bandanna attachment. (Evelyn's Request)
A Pokemon figure of Hoopa Unbound. This figure is in the style of Bandai finger puppets. This figure was designed for a commission. If you would like to commission me to design 3d printable miniatures you can do so at my Etsy store.…
I didn't want to rummage around looking for bandages, so I created this organizer. All the sizes are available in one spot for easy selection. January 22, 2024: Added organizer without cross. 0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
A Pokemon figure of Darmanitan’s Galarian regional form in standard mode. This figure is in the style of Bandai finger puppets. This figure was designed for a commission. If you would like to commission me to design 3d printable…
We had a bandaid box from the Container Store that broke when it got knocked over. So I made one that holds 3 sizes of bandaids, antibiotic ointment, and nu-skin or similar. Also space for gauze pads or additional sizes.
DISCLAIMER - TL;DR: This is a simple replacement for the metal clips that keep an ACE bandage in place. If you find this print not meeting your expectations, I refer you to the scene where Willy Wonka has the children sign the contract…
Holder for common sizes medical bandages. Two parts should be glued together
This model is compatible with the lego system.
Dieses Teil habe ich konstruiert, gedruckt und in Verwendung. Zur Erhöhung der Standfestigkeit habe ich in der Strebe ein Metallstück SW 19 mm eingelegt. To increase the stability, I inserted a piece of metal SW 19 mm into the strut. Da…
Soporte de dos niveles de diferentes alturas para colocar bandas de cabello. NO requiere soportes. Una vez impreso se debe ensamblar utilizando pegamento para el soporte inferior y un tornillo para el superior. Incluí un archivo para…
Bought a large box of assorted Bandaids at Costco and the Bandaids quickly became mixed up and disorganized. So I designed this simple, tiered organizer to fit in any standard size medicine cabinet.
An insert for a box of Band-Aids to keep them organized. Fits inside the original box. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: generic PLA Category: Organization
it is a combinable interlocking base for Bandai MSE and a 15 degree sloped extension parts to provide more pose options. --- 2022/11/19: MS_ensemble_base2V2, MS_ensemble_15angleV2 & MS_ensemble_10angleV2 added Version 1…
The headband plate for Naruto, the plate is thin enough to provide some flexiblity.
Made long for customization of height, trim to desired length. Peg should fit into neck piece and chest slot snuggly with a small amount of sanding. The ball itself fits Hasbro Black Series 6" heads nicely. Is currently modeled in 1/12…
This is a generic base for the limited flight stand included with some of the DX VF-1 valks. I made the hole a little bigger to allow the riser to connect more easily. You can print it upside down if you want the surface to be without the…
Disclaimer: This is not a full model kit, it is a single part of a larger kit. Please support your local Bandai dealer. If you are bull in a china shop like me you'll break this part like I did. So I thought I could 3D print so I didn't…
This is a spring loaded bandaid dispenser. It's made for the 1"x3" flexible fabric bandaid which has a 40mmx96mm package. It holds 20 bandaids, is easy to load. I printed this with standard settings on a Prusa MK4 from PLA. To make the…
Two sizes of band aid holder that can be added to a key ring. 0.6mm nozzle, 0.2mm layer, PLA, Sovol SV01
A cowboy I used as a prop previously, then placed onto a base to be a statue
Designed this box to hold band-aids and other similar types of bandages. It's designed dimension wise to fit within a medicine cabinet. It's 3 models in total so it can have the plus symbol on top printed in a different color if you choose.
When you need a band aid, make it easier on yourself and have them organized. This design is printed in 2 parts, and fits the BAND-AID Brand Adhesive Bandages Variety Pack. Fits the following Band Aid sizes while they're in their…
Bei diesem Projekt handelt es sich um einen Tischabroller für Paketklebeband. Die Rollen sollten Standardklebebandrollen sein. Der Rollenhalter ist ausgestattet mit einer Metallabreißkante, die ich vom Händler mit dem großen “a” bezogen…
This model is compatible with the lego system.
An efficient and quick way to keep your mess of AA and AAA batteries organized in a drawer or backpack. Bind this storage pack together with a rubber band for added security and to avoid spills. Alternatively, print just one half for easy…
A Gridfinity Bin 4x2 with an inlay fitting the Tesa Klebebandabroller 59327
A simple habit for bandages. Nozzle 0.4 Support NO Infil 20% Materials PETG you will need: super glue
Bandaid Cookie cutter. Can also be used for thermometer or syringe. If you found this useful, please donate what you think it is worth to my paypal.me to help cover the time of design. Thanks, Enjoy! Print Settings Printer: BIBO Rafts: No…
Print tips There are two methods for printing the lid. Print in one go using file “lid_w_detail”. This requires supports that can be a little tricky to remove. The supported area is hidden when the box is closed so no loss of class…
Designed for Band aids, it is about 1 3/8" W x 2 1/8" H x 6 1/8" L on the inside. The sidewalls are about .1" thick to prevent deflection and the dividers slide easily into the 6 mounting positions. Print as many dividers as needed. No…
This free 3D-printable Mummy Bust is perfect for Halloween decorations, horror enthusiasts, or anyone who loves Egyptian mythology. The bust showcases intricate bandage wraps and subtle details that bring an ancient, cursed mummy to life.…
It's a complete overhaul of a similar one I found. I added a handle, edited the crank to be more comfortable to insert the bandage and added a new clamp and hinge to tighten the bandage. Hinge is made of a single piece of filament, if…
Diesen Abroller für Klebebänder habe ich konstruiert, gedruckt, montiert und in Verwendung. Zur Erhöhung der Standfestigkeit habe ich in der Strebe ein Metallstück SW 19 mm eingelegt. To increase the stability, I inserted a piece of metal…
Make boo-boo time less painful and store bandages in style! Locomotive also features a bobby pin holder!
For the robot contest my son had the idea to make a Baymax that can hold bandages and a lollipop inside. I haven’t had time to try printing this one yet, I made this in 24 hours, and I need to go to work. So it’s a work in progress but…
Small organizer for 3 sizes of bandaids
An attachment for a drill that will speed up rolling your pesky boxing bandages after washing. Simply slide in one ned into the slit and start the drill on low speed. You can print it with PLA laying on the side with the slit facing…
Keeps a few regular sized band aids from getting crumpled wherever you keep them.
Ersatzkern für Scotch Klebebandabroller. Innenachse muss separat gedruckt und nachträglich nur zusammengesteckt werden. Material: PETG
A buddy of mine chopped off the tip of his finger, so I decided to cheer him up by making this prosthetic accessory. Print in ASA, ABS, or NYLON, and bend the temples carefully while still hot. Attach the eyeglasses to the bandage using a…
About Complete replacement shell for the Apple or Bandai Pippin, created as a challenge to myself for #MARCHintosh - took 2 weeks to create from scratch! If you are interested in the entire process, I have uploaded a detailed thread on…
When exercising with a face mask the fabric is prone to pulling against your mouth when breathing in, making breathing difficult. This device maintains a space between the upper lip and fabric, making it easier to breathe freely. Print…
Medipack that can store bandaids, inspired by the TF2 Medipack. After bottom and top half are printed, the hinges (should) just snap in place.
Keeps bandaids (bandages) sorted making it easy to find the correct size. Print and stack as many as you need. Each one holds three sections of bandaids. Stack one on the other and then snap the lid on the very top. NOTE: recommend glue…
My local church community collects and winds deprecated bandages from a bandage manufacturer (compromised quality but still valuable). The community members spend hours every week processing and winding these bandages to be then sent to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This allows for organising various preprinted labels. Useful for labelling common items. Written in OpenSCAD so can generate any slot size or count. Default stl fits a Prusa MK3S+
soporte tubo teflon capricorn stl
I needed a giant bandaid (17.5cm) for a trophy I was making. There was nothing available that suited so I made this one up. If like me you want to print the cotton pad on the back in white then it is easily done by splitting the 3mf to…
Keep your bandages clean, organized, and easy to rewind with this compact Bandage Winder & Storage Box. This model combines a storage container and a simple rewinding system in one practical design. Perfect for elastic bandages, sports…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
used wit double sided tape. Neuu is with a thumbtack for stability.
Rolladenbandabdeckung DDR Rollladen
I was tired of dumping out the entire box of my favorite bandaids to find the size I was looking for. Designed this with slots for each of the waterproof bandaid sizes in the Nexcare box. Prioritized accessablity and visibility over…
