Counting matching models…
I love the belted Z of the Simplecore, however, with the stock direct drive setup, the bed tends to drop like a rock, especially for larger builds when motor power is cut. To fix this, I've designed new motor mounts that add a 4:1 gear…
*ADDED Z-AXIS DRAG-CHAIN MOUNTS. To fit a Drag-chain to the Z axis with the Belted Z you will need: MOTOR_MOUNT_Z_CHAIN_V1.1, Z_LOWER_MOUNT (V1) v1 BELTED_Z_BELT_NUT_MAIN_V1.1 BELTED_Z_BELT_NUT_CAP_2X_V1.1 ZX JUNCTION (V2) X MOTOR CAGE…
Just to clarify - this model contains changed files only (based on Model 6 v 1.1.2), to build the whole thing you need other parts from one of the Rancher models from 3DSets:…
Huge thanks to my Patrons and Printable's Club supporter without whom this would not exist. To support my work , the material, time testing, and refining it consider joining my Patreon (also has the ApolloLander shroud) or Printables'…
See picture 2 for the adjusted Kirigami bed mount. I had it working with only 3 screws first, but made the last one possible without adding a M3 heat-insert. Just screw a M3x6 BHCS directly into the plastic. Please refer to the original…
The main cable holder and gantry alignment guides used in the Youtube video, “Neptune 3&4 Max Belted-Z Mod”:
Please visit my store for my newest model! https://www.printables.com/model/1471378-4wd-belted-rally-chassis-3gen BUILD INSTRUCTIONS: Materials ordering list is in the PDF Filaments from amazon TPU-85A ( ~100g ) / TPU-72D ( ~400g ) /…
update 22/05: Added reduction_plate_60t.stl file for pulleys with up to 60 teeth This reduction box supports reductions of up to 2: 1 or 1: 2 I'm creating another one for reductions of up to 3: 1 but that will unfortunately be a little…
Rook 2020 Z motor mount for 4:1 gear ratio. UPDATE: 6/1/23 V4 Fixes Easier belt installation Removed motor mount screw Needs Rook BOM rubber feet or - Rook Feet options - Below - Belt Clip For easy tension - Zip tie around for security.…
Printing: print at 100% infill (seriously) in PETG, ABS, or similar (no PLA) Model selection: there are two models included - one that fits over the existing belt retainer and another that replaces it entirely. NOTE: I have not tested the…
I got myself some really cheap 60/20 teeth sets and figured I would use this instead of the 80/20. But that meant I had to make the mount myself, so I did. This will work with a 60/20 (3:1 ratio) set with a 200mm closed belt. BOM : - 60…
Check the video - fast transition between each layer when printing! Latest update: I have uploaded STEP file. You can use it to help yourself with assembly. Note that this mod may require you to use different power supply (PSU) unit such…
A (Hopefully good) bed mount upgrade for the Creality Ender 7. I got the job of designing a new bed mount for a Ender 7 as the original mount was basically unusable, the bed wobbles so bad at the print results are horrible even at 20mm/s.…
Ender 3 V3 SE Belted Z Mod I designed this to replace the z-axis screws of the Ender 3 V3 SE. My z-axis kept skipping layers, and I didn't want to solve it while still using screws so its now a belted Z machine. This was inspired by the…
Use a M5x45 screw with head cuted, or a treaded M5 rod. You need 2x M5 nuts. Print the output pulley and assemble like 3Dsets manual describe. Cut a M5 rod or a M5 screw to have approx 10mm each side. Threaded rod or screw have to be…
This remix is compatible with Squirrelbrain 's Ratrig V-Minion Belted Z Assembly (V1) This box is made for the BTT skr2 and the PI 3 A proposed by Rat Rig in the full kit. You can reuse the 4010 fan and the Cable passthrough part. This…
This is a Simple Belted Dual Z Helper based on the Poor Man's Dual Z for Ender 3 by @tmackay . The theory is similar to drafting tables with a long history and is simple and working well. The theory of the original There is a tensioning…
Hi, I have designed simple filament guide for Belted Z V2 made by Squirrelbrain. Im using M10 filament tube connector. It might be hard to screw valve, so clean 'hole' from any remains of the filament and and genetly screw it with thin…
I suggest watching the video to see the results before attempting to make it. WHAT I USED: Parts: The bracket that needs to be CNC'ed https://www.pcbway.com/project/shareproject/KP3S_3_0_Belted_Z_ad6ba401.html 2x MGN9H 300mm…
Just a quick remix for M3 and 20 teeth idler Print Settings Printer: FLSUN Super Racer Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: extrudr greentec pro carbon PLA carbon black Post-Printing ============= Category: 3D…
As I dont use the drag chains from Squirrelbrain's V-Minion mod, I needed a suitable X end cap for the wire loom holder. It matches the overall design and is compatible with the Z belt tensioners. Opposite to the original V-Minion X end…
The deck pieces are modified to cover the hole where the z motor would have been, as the belted z mod idlers are much smaller.
Update : A hardware kit is available here This is a lightweight belted extruder derived from the geometry of Greg Frost's excellent hinged accessible extruder. Design elements: NEMA 14 motor. This reduces the moving mass to about half…
This remix allows the user to have even more clearance in the Z direction, you will gain anywhere from 10-20 mm of Z height due to conflicting geometry being moved out of the way. To combat flex some areas have been beefed up even more.…
For BBOX or simplecore I had some problems with the z system on my BBOX so I adapted this system from the simplecore since this two are very similar printers, THIS IS NOT TESTED partially... this is a correction of my files, my previous…
I found the original top belt bracket a bit weak when installing them so I created a thicker version with more sections to make it stronger. This was in my early Fusion 360 days so I didn't refine it but it worked well and is still…
Wire passthrough and holder can be reused from origin case and m3 hole reserved. Space for 2x 4020 fan is reserved. I am printing the model and going to adopt together with BTT EBB 36 to minimize the number of wires inside the case.…
This is a thing i remixed, to add some supportbraced to my belted z mod for the Ender 3. (https://www.thingiverse.com/thing:4243512) you dont need to rotate the stl, they should be correctly oriented, but you will need supports enabled. i…
The original PSU holder isn't compatible with the slimmer meanwell ones supplied by ender3 pro and v2. Remixed the part so that it would work with the meanwell ones. Printable without supports!
I designed this to reduce weight and size of the right side X axis carriage, its deigned to fit the “belted Z mod" for the Ender 3.
This is a belted variant of the jonas kuehling's greg wade extruder. for Buddaschnozzle. It uses the Lulzbot Taz 3 Extruder as a base. It is designed to fit the extruder latch and idler tube filliament guide, however neither of those…
This project has been replaced by the new version 2.0 variant here: http://www.thingiverse.com/thing:2169219 The Nova Pro extruder is a new lightweight belted design with an extremely short distance between the hobbed section and the…
This is remix of Beltdriven Tensioner for the Haldis Black knight linear rail kit for the ender 3/S1. The original model works but the belts weren't parallel. I have updated the design to the v3.7 version of KevinAkaSam's belt driven z…
The original toothed and F623 idlers attach to where the 2040 and 4040 extrusions cross each other on the Ender. Some printers do not have this type of attachment (such as my Biqu B1 SE). This is a modification of the lower idlers so that…
Remix and enhancement of hobie77's "Geared Bowden Extruder v2". Re-designed package to use a 25mm screw, added a cage/outer support for large pulley, filament runout sensor, and PTFE fittings. Calibrate E-Steps using Bowden method:…
This mod is a must, that flimsy ridiculous M4 threaded Z-axis is a joke. But don't rip it out before you printed the required and bought the small BOM of parts :D Prima_select_mp120_v4 #Profab_mini #Felix_tec4 #Wanhao_i3_mini #Malyan_m200…
This is a tool to help assist with the building of the belted-Z mod by KevinAkaSam. It's for use with the option for the bottom idlers that makes use of 2 bearings instead of the GT2 pulley and is designed to help press in and adjust the…
A mount for KevinAkaSam's Belt Driven Ender 3. Simply replaces the belt clamp for an easy to install cable chain. Also a mount for bottom connection to frame. One version has heatset mounting and one is plastic threading.
This is a plug and play belted gear box with 3.5:1 gear ratio (when using a 16t pulley). I'm using it on my Bear extruder with an LDO 0.9 Slim Power stepper. Very inspired by https://www.thingiverse.com/thing:3553286 and…
This an upgrade for the Little Boy 3D printer. the added files are the ones that changed everything else stayed the same and these are the ones you need to print. You still don't need to make any changes to the original Ender 3 firmware…
Updates coming soon! The chassis is sculpted out in one piece ( large build plate needed! 280 x 250 ) , which gives maximum strength 💪 , and less weight, much less screws needed, and makes it cheaper to build. For the maximum performance…
This is a plate for KevinAkaSam's Belted Z mod that allow attachment of a filament sensor on the top corner of a printer. To use this, use two M3 heat inserts where the filament sensor sits. Alternatively you can just use a nut and screw…
I wanted to use a nema 17 motor for a belted z on a voron 0 and none of the existing mods could. It's a bit fugly but it will be under the printer and not seen. The z belt mod nhchiu made(pink+purple in pic) but with spacing for a nema 17…
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
This version is only for dual Z motors. The bracket is ugly, but does the job and is quite stiff, even in PETG. The bracket is fully symmetrical, just print two. You will need a M5 nut, three M5x12 screws and 1x M5x20 (or a bit longer)…
Choose the CW or CCW version depends on dominant direction of the rotation (i.e. forward cruise). Designed primarily for Turnigy Aerodrive 3536 outrunner. Modify the hole for the rotor shaft flange and/or the contact contour shape based…
Moved out from my store, because many components became discontinued, and had to replaced by rare and expensive parts. Updates are on the way, will update the parts list when everything arrives (in 2 months). The chassis is sculpted out…
Ender 5 Plus Belted Z Mod (Based on Ein’s SimpleCore Design) This mod adapts Ein’s SimpleCore belted Z to the Ender 5 Plus . It has been very reliable—no issues printing ~2 kg parts. Use high-quality 10 mm belts. For additional background…
For BBOX or simplecore I had some problems with the z system on my BBOX so I adapted this system from the simplecore since this two are very similar printers, THIS IS NOT TESTED partially... this is a correction of my files, my previous…
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
This replaces the bottom idler bracket for KevinAkaSam's Belted Z Mod for an Ender 3 Max. The original bracket is an L shape and made for the Ender 3/3 Pro and other's where the gantry uprights mount on top of the base. The E3Max has the…
if you already have my belted z setup the top and bottom parts are the same, and the Z tensioner design is the same. I only made the red spring model (15x4mm generic cast spring from amazon/Ali) you can also use M4x16 instead of the…
When I got all the parts to assemble the mod, I discovered that the heads on the M5 x 8mm screws I had bought where too wide and would crack the parts when installed. Even after getting a few less wide screws, they still didn't fit. Thus…
Ender 5 Plus Belted Z Mod (Based on Ein’s SimpleCore Design) This mod adapts Ein’s SimpleCore belted Z to the Ender 5 Plus . It has been very reliable—no issues printing ~2 kg parts. Use high-quality 10 mm belts. For additional background…
This originated from originally making a voron 0, with a belted z from (https://github.com/theFPVgeek/VoronUsers/tree/master/printer_mods/theFPVgeek/v0-zbelt-mod), and having issues with inconsistent extruder I decided to convert it to a…
I used V2_DoubleT XYZ idlers and belted-Z mod and was quite happy with them. When the R2 came out, the gantry was improved, so I created this mod so I could continue using them. Unfortunately, my printer is currently broken so I haven't…
Version 2 of my Belted Bowden Extruder with Filament Runout, which includes the following enhancements: Fixed stepper motor Spring loaded belt idler (Needs two 3mm SHCS/nuts to fasten to top_frame. Carries over additional enhancements…
Using these parts in combination with the other parts from the base mod, allows you to perform the modification using only 5mm-bore bearings/pulleys, and 5mm shafts - no more 8mm stuff on the top, or 3mm on the bottom. Parts were selected…
This replaces the bottom idler bracket for KevinAkaSam's Belted Z Mod for an Ender 3 Max. The original bracket is an L shape and made for the Ender 3/3 Pro and other's where the gantry uprights mount on top of the base. The E3Max has the…
These are mounts that screw directly into the top of the Neptune 3 Pro (plus/max I assume). I used 30mm socket head screws. This allows for you to use the modified files from Mlee on the mount. I didn't think it would be strong enough to…
This is a remix to add 4:1 geared belted z for the fully scalable rook. See Update - Rook 2020 4:1 Belted Z V4 for motor assembly pictures. You can use the original fully scalable feet also. All of the parts have been printed and…
I combined the belt mount from MNK with the design and end stop screw mount from the original Kirigami Mount. Mounts with 3 M3 Headset inserts and 4 M3x6 screws. The fourth screw screws directly into plastic. (same as the mount from MNK).…
Tested with Kavan C3542 motor and fit perfect. Need longer screws for installation to gearbox( 4x M3x20(25).
Did some improvements few years ago and decided finally to publish them. Ask if more info needed
A filament sensor holder that doesn't get in the way of any parts from KevinAkaSam's belt driven Z mod. To mount it, unscrew the screw you see in the picture slightly, snap mount the holder, keep it straight and tighten the screw back.…
STL, notes and BOM is in the zip. Latest zip (September 8 2024) has linear rail version as well if you need a printed GT2 80t pulley click here One working and tested novelty here is a self tensioning system using a spring ( two specific…
