C-17 Globemaster III Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 362
- Likes
- 91
- Rating
- 5
Counting matching models…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Magnet based on the C-17 Globemaster III. Detailed model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
Magnet based on the C-17 Globemaster III. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets
Hinge for my Bemis toilet seat broke. Tried to epoxy it back together. Didn't work so modeled a replacement part. If this is a design flaw and you happen to have the same toilet seat hope this saves you some time. Printed on a Creality…
The C-17 Globemaster III is a large military transport aircraft that has been in service around the world for the last 30 years. Created as a paid commission for ChmNrd , the same legend who commissioned the C-130 Hercules Kit ! EDIT:…
ENG (german below) This is a 3D model of a geared motor as included in the Bambulab Construction Kit 003 (Marble Machine) and 005 (Engine Model). This model is not intended for printing, but as a template to use in Fusion 360 or similar…
This is for the Bemis NextStep2 toilet seat with soft close hinge. It may fit other Bemis toilet seats. It seems these hinges are prone to breaking. This is what a broken OEM hinge looks like: You'll want to use supports for the inside as…
Found only jigs for 1/10 tires so i designed a new one. Printed it in ABS ( base and sideparts) The Top Part takes lots of load so i printed it in PC-CF but every other mateial with 5-6 walls and high gyroid infill ( 40%) should work. i…
Experience the thrill of aviation with this stunning military transport aircraft STL model that brings the legendary C-17 Globemaster to life on your 3D printer! This meticulously detailed 3D printable figurine captures every curve and…
A BeMeeBeth from My Singing Monsters lithophane in single color for every Bambu lab printer. IRL image soon. Powered by MakerWorld-Make My Lithophane (https://makerworld.com/makerlab/makeMyLithophane)
No-slam toilet seat hinges are subject to high stresses when the seat is quickly forced closed. This part replaces one of the hinge halves to salvage the seat. I used PETG but other materials might also work. Hexagon screw holes were used…
Printing Parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no
Ok, don't laugh, but this is a legitimate print! How frustrating is it when you have to replace a perfectly good toilet seat because the bumpers located between the seat and the seat cover fail? Most of these fail long before the toilet…
Weihnachts Engel zum bemalen. sollte “stehend” auf den meisten Druckern ohne Support laufen.
Make an icecube with the power of a peltier element. Easy to print ice machine. It can only produce one icecube. Approx 1 hour per cube. You can use it for camping. Connect it with the 12V Carplug. (12V, 5A, 60W) Most of the parts are…
Mini Nussknacker zum bemalen. 1:1 gedruckt Gesamt-Größe 175 mm Mund-Breite 15 mm Schulterbreite 100 mm Kann je nach Material und härte der Nuss funktionieren. Print instructions 1:1 gedruckt Gesamt-Größe 175 mm Mund-Breite 15 mm…
Figurka dle slavné fotky....
Easter Bunny coloring Eggs
Arco-Iris / Rainbow (Vai ficar Tudo Bem / It's gonna be okay) Multicolor Can use 3mf for Prusa and see color changes Category: Art
Bembel (the jar), Geripptes (the glass), Schobbe (the contents of the glass) - let your minifigures enjoy some Hessian cider! The Bembel can be stuck to a nub, and be held by hand; the Gerippte clips into a hand. The part Schobbe (best…
3D-Druckbares Zeichendreieck für Technisches Zeichnen Beschreibung: Dieses Zeichendreieck ist speziell für normgerechte Bemaßungen ausgelegt und erleichtert das technische Zeichnen. Es verfügt über zwei unterschiedlich dicke Kanten (10 mm…
Iconic Twilight Zone Characters - Henry Bemis - 1959-1964
This is a 3d scan of the hinge for my round Padded Mayfair by Bemis toilet seat lid. The hinge broke, so I printed a par so they would match and it worked great.
Ich nutze diesen Adapter zur Verbindung meines JMC 180W Servos zu der Entsprechenden Gewindestange bzw. an die Adapterplatte. Die Aussparung an einer der vier Seiten ist zum nachträglichen Befestigen und Lösen der Motorwelle von der…
Opis Modelu Ten uroczy model przedstawia Gnoma Piekarza dumnie trzymającego świeżo upieczony bochenek chleba. Gnom ma radosny wyraz twarzy, z zamkniętymi oczami, jakby delektował się zapachem wypieku. Ubrany jest w klasyczny biały czepiec…
Model na ścianę ozdoba C17 Globemaster III
A freestanding 'be mine' sign with a heart. Best printed in red, no supports required.
Aufputz Gehäuse für 2er Steckdose oder Schalter - auf 0,15mm Nozzle bemaßt SLDPRT Datei anbei.
I have this auto cat feeder that was having issues. It felt like the impeller was a bit too flimsy and couldn't do its job correctly. It also started to break. I made myself a sturdier version, in TPU 95A, to address those issues. If you…
Prostorový přední pohled na zámeček Větruše v Ústí nad Labem - miniatura
Rame Bem 4/6 des transports publics de la région lausannoise en H0, qui circule sur la ligne Flon - Renens. Fabricant du train "original": Vevey Technologies
This is a mounting platform and sign bracket for the C-17 Globemaster III kit card by Nakozen available at https://www.printables.com/model/169431 These parts are designed to attach to a 3UDC pivot arm so that you can present this model…
Stand created for Vype Pro and Innokin endura T18 Mini. Print instructions Print with support from build-plate.
Every year for my birthday, I bake a special treat: my signature Apfelweinkuchen . Apfelwein (a beloved regional beverage) is traditionally served in a "Bembel," a distinctive pitcher. To celebrate this local tradition and add a personal…
I've got a 1939 toilet with a weird ~9-inch bolt pattern spacing that I couldn't find a toilet seat that it fits, but the Bemis Jamestown Round seat (Model # 530SLOW 000, Home Depot SKU 1001262683) otherwise fits and has an easily…
Hallo, mit Hilfe dieses Teils ist das bemalen von Tabeltop Figuren oder andere Modelbauteil einfacher. Für den perfekten Halt braucht ihr noch patafix von Uhu. Patafix ist eine Art Klebeknete die man immer wieder verwenden kann. Ja nach…
While using the original model for a few hours of printing, I noticed that the PTFE tube slowly moves upwards because of the retractions and inevitably gets caught by the extruder wheels. The tube is afterwards damaged in such a way that…
# Seeadler auf einem Felsen – Detailliertes Modell zum Bemalen Dieser majestätische Seeadler, der auf einem Felsen steht , wurde von mir speziell für den 3D-Druck entworfen. Mit seinem geöffneten Schnabel, den ausgebreiteten Flügeln und…
Dummy M10-06230-15,1 Mini-Getriebemotor Dummy zum Konstruieren Print instructions Dummy zum Konstruieren, ist nicht zum drucken gedacht verschiedene Formate anbei.
The steel front of my Tubeman II made in the previous millennium has oxidated to black, so the black lettering on it is almost invisible. I printed these, wiped the steel plate with alcohol and used contact glue to attach them. They are…
Cute Bem Statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
Name: Brinko Bem Collection Category: Brinko Bar Dimensions: 1,2,3,4,5,6,8,10,12 Recommended material: PLA, PETG Printing method: FFF Required supports: NO Recommended configuration: 15% infill, 0.22mm layer height Description: PART…
Ein einfacher Spielwürfel. Einfach zu bemalen für die MMU. Die Punkte stehen 50µm raus und werden plan gedruckt Bei 100% Infill (PETG) hat ein Würfel 4,7g Farbtiefe habe ich auf 3mm definiert Happy Printing! A simple dice. Easy to paint…
Jozef Bem statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
anyways as my username says i am zarroe the ethereal monster creator so i have created BeMeebEth so uhhhhhhh yeah
LYSÁ NAD LABEM – ZÁMEK | 1:600 ČESKY Detailní model zámku v Lysé nad Labem s kaplí, nádvořím, kašnou, terasou a schodišti na společné podstavě. Celý model se tiskne jako jeden díl bez sestavování. Kompaktní varianta v010 nezahrnuje velkou…
Inspired by https://www.thingiverse.com/thing:2664545/comments Remixable from the Onshape model .
J'ai utilisé une photo d'une statue d'Athéna que j'ai faite en Grèce en 2003 et j'ai utilisé IA pour générer le modèle.
Kleines Schild mit “Bitte KEIN unadressiertes Werbematerial” und kleiner Halterung mit nur einer Schraube. Gedruckt in PLA 0,2, hält trotz exponierter Position Wetter und Sonnen schon seit Jahren
Gerbemon Digimon Creature Model
Orginal motor link: https://www.cubemars.com/product/ak80-9-v3-0-robotic-actuator.html this is my first model of community pls dont judge me my github: https://github.com/Mustafaygt66 my linkedIn:…
A simple model to fix a basic problem - a broken toilet lid/seat cover bumper. Unfortunately, I wasted a bunch of time/some money trying to find one with this particular height and for some strange reason, couldn't find them locally.…
TPU “rubber” flap in three parts for smaller print beds to replace Part No. N482341 for popular yellow or red brands of corded or cordless electric Lawnmower: DCMW220P2 CMCMW220P2 DCMW290H1 DCMW220X2 BEMW213 CMEMW213 Line all three up in…
A Funko pop of myself. Created with creality CubeMe. Just a test, to see if it is cool. I will definitely try printing.
Žáci se budou aktivně podílet na tvorbě výukových pomůcek v podobě ozubených kol. Uvědomí si závislosti poměru ozubení, dozví se, jaký vliv má tvar a počet jednotlivých zubů.
This goal was designed by the Robocup Standard Platform League (SPL) Team "Bembelbots" from Goethe-University Frankfurt (Germany). Find out more about them at https://bembelbots.de/ ! Besides the printable files you need some net and…
Nosník s kloubem pro přichycení například injekční stříkačky, na druhé straně lze připojit pomocí M3 šroubu cokoli.
mystery scale, maybe Bemece? Kingrinder (mine is K2) regular Aeropress Designed to experiment with the OnShape Phi integration. Hollow, so can be filled with e.g. sand to give it more weight before closing it. I assembled it with screws,…
Aufputz Gehäuse für 2er Steckdose oder Schalter - auf 0,15mm Nozzle bemaßt SLDPRT Datei anbei.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
J'ai utilisé une photo d'une statue d'Athéna que j'ai faite en Grèce en 2003 et j'ai utilisé IA pour générer le modèle.
Jozef Bem statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
Cute Bem Statue Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
I have this auto cat feeder that was having issues. It felt like the impeller was a bit too flimsy and couldn't do its job correctly. It also started to break. I made myself a sturdier version, in TPU 95A, to address those issues. If you…
A Funko pop of myself. Created with creality CubeMe. Just a test, to see if it is cool. I will definitely try printing.
This goal was designed by the Robocup Standard Platform League (SPL) Team "Bembelbots" from Goethe-University Frankfurt (Germany). Find out more about them at https://bembelbots.de/ ! Besides the printable files you need some net and…
Malý klínek s otvorem pro šroub k možnému zajištění správné polohy. Rozměr šroubu je M6.
3D printable topographic miniature of Ústí nad Labem - 🇨🇿 Czechia Capture the beauty of Ústí nad Labem 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.662,…
Paranormal Mystery Art - Cryptids - Mokele-mbembe of Congo River 3D printable model.
I had a box without cover, I just designed this and attached a bematik outlet so I can use additional external plug to the wall. This is the outlet: https://www.amazon.it/gp/product/B07NW282YV This is abox similar to the one I have:…