Counting matching models…
Reminder that PETG is better outside than PLA. Might benefit from spraying with something UV protective, either way. Made it with https://www.printables.com/model/125714-bird-feeder-for-small-birds/files specifically in mind after…
Print approx. €12.52–€15.30 excl. taxPreliminary estimate for PETGSource material: PET
Update: grabbed all files and included them, some of the original still have mesh issues, but print fine. Fixed parts don't have mesh issues. For Unserfamily's and bennydesign 's remixed versions: (Unserfamily:…
A modern 3d printed birdfeeder to have on your window. Small capacity, but the birds are really close, so good compromise. Print both parts, glue them together, and then stick the assembly to a window using double-sided adhesive.
This is a roof part for prusament spool birdfeeder by RT3D Workshop. The original model risks getting the fod wet and causing disease to birds. This is simply an extension with soda bottle threads, no gluing is needed. The original model…
Remix of "Wingspan Dice Box/Tower/Birdfeeder - Flat Pack Fix Remix" by gexgecko. Added small tabs on side pannels and holes on roof to hold roof in place without needing glue. I only included the side pannels and roof as those are the…
I added a hanging loop onto GavinKennedy's bird feeder and published it as a remix some weeks ago. All was fine and dandy, an excellent project which enabled me to 'upcycle' quite a number of our used fizzy drink bottles. However .... the…
More info on how I made the glass here (reddit) and here (imgur album) and in the video to my assortment box here . One of my few projects that I actually kind of finished. As I always start to despise my projects the closer I get to…
No supports needed! Birdfeeder3.stl has larger holes than Birdfeeder.stl so larger seeds don't get stuck.
Krmítko pro ptáky. Skládačka, lze složit bez použití lepidla.
viel spaß mit dem druck die vögel werden sich über das geschenk freuen.
Bird Feeder that uses a wide mouth mason jar. print the thread test to ensure the correct fit. can be mounted to a post with the included bracket. check out the full video here:
Fairytale (Christmas) birdfeeder or latern 20 cm (one colour) In translucent white it looks like covered in snow. I printed it in PLA and is came perfect and without any problems. Just be very careful in postproduction process because the…
Feed wild birds with this bird feeder that attaches to a 2 or 1.89 (64oz) liter bottle. rivet a chain to a bottle for a secure hold. I also attached a 2 and 1.89 liter bottle funnel. Use no top or bottom layers and a high infill (75%+) to…
Wanted to have a birdfeeder with peanutbutter. I saw a few examples on the internet, but I liked the Prusament PETG Pistachio color a lot, certainly because it is similar to the corners of our garden house. So I created a birdfeeder…
Das Futterhäuschen ist aus PETG gedruckt. Es steht auf einem Zaunpfosten 7x7 cm. Zum Druck: Für den Druck ist ein Druckbett 300x300mm oder größer notwendig. Die Bodenplatte ist ca. 295x295mm groß. Es sind 5mm Wasserablauflöcher und 4…
I recommend printing from PETG or ASA material. Print resolution: 0.20mm - 0.30mm Filling: 20-30% The following screws are required for assembly: For fixing the bottom and pillars: 4 pcs Imb M4 × 25mm including nuts For fixing pillars and…
This bird feeder was created for a client that backed out. did not print yet! The picture was just from google. Gonna upload mine soon. Enjoy Printing :-)
Remix of the Mix and Match Birdfeeder by Alzibiff https://www.thingiverse.com/thing:1678790 to fit to a Aquarius 500ml bottle. The birdfeeder itself, the extension and the roof were adapted to the wider thread diameter. The inner…
Easy to assemble with multiple parts (all can be 3d printed). If you'd prefer, you can use a bolt/nut (¼" or 6mm should work, ~35mm long) for the pin at the bottom that holds the base on. Also, you could use a standard aluminum carabiner…
Printsettings: LH: 0.2mm no support(there is support on the strap) infill for the top: 40% I print the feeder in PLA, if the feeder hang in the sunlight, I recommend PETG You need a buildplate at least with 22 x 22cm With base_1.1: I…
I introduce you to the BirdFeeder, you just need to have food, an old Water Bottle and passion to see Birds eating ehehe Happy printing from Portugal :) Printed With PLA
A birdhouse inspired by a beehive. It consists of four parts in total and was designed to maximize the build volume of my printer, which is 256×256×256 mm (Bambu Lab P1). The parts are as follows: A base plate with holes for water…
Supports are recommended, put birdseed in the top and screw the cap on.
I just printet in pla, no support needed. Enjoy.
I remixed, and combined to sodastream bottle bird feeder. I used the “old” sodastream PET bottles which don't fit my new SodaStream anymore. The Roofsegment part has to be printed upgright with support (like on the last picture) 6…
Birdfeeder wall art 20 cm, one colour
The old beerhouse model that can be used as a birdfeeder. The models are either high poly/low poly, top and bottom, or whole model. The size is to big for most printers, Rescale it to 0.6 should work. On the roof I suggest you plant some…
Vogelhäuschen Druckbar mit MK3 PETG Scheiben mit transparentem PETG drucken, damit man den Füllstand sehen kann. Viel Spaß beim Beobachten
large bird feeder for wall mounting or attachment to a privacy fence Different attachment When attached to a smooth wall, the container must be removed for filling. This is not necessary with the privacy fence, but I still take it off to…
Ein simpler Vogelfutter Silo, einige Teile in versch. Ausführungen… für Pet-G oder VIVAK Folien von (0,3) 0,4-0,6mm Der obere Rahmenteil wird mit dem Hauptteil verklebt zb. Sekundenkleber oder UHU Allplast Das Dach wird am besten vor dem…
Easy fill birdfeeder. Just lift the roof and poor in the seed. Printed in PetG at .2mm layers with .4mm nozzle.
This is a remix of "Mix and Match Birdfeeder" https://www.thingiverse.com/thing:1678790 I have only modified the "slanted roof" section to use a very well known brand of 625g size Tomato Ketchup bottle for the birdseed container. The…
Can be printed with PLA and PETG.
I created a simple mounting bracket for the feeding station. The bracket fits perfectly on a steel pipe with a diameter of approx. 65mm. 2 cable ties are required for attachment.
printed in two parts and glued together to avoid supports
Einfach zu Drucken, ohne irgendwelche Hilfen. Wandstärke 1,6mm um mit 4 Wänden bei 0,4mm Düse massiv zu drucken. Ich habs mit PLA+ 200°C / 60°C bei 250mm Geschwindigkeit gedruckt. Der Deckel passt bei mir ohne nacharbeiten leicht, ohne zu…
Designed this birdseed funnel so that it will fit in birdfeeders where you take the chimney off to fill. Base is 1 ¼" square. Printed with light infill, and works pretty good.
This roof slides onto a wooden birdhouse. It is attached from the back an has a hole to be hung to a screw or nail. You can build multiple housings, feeders or decorative items that ca easyly be switched without removing the roof from its…
Small change from this pretty design. Changed the hanging version into a pole-mount version. (13mm diam)
I recommend printing from PETG or ASA material. Print resolution: 0.20mm - 0.30mm Filling: 20-30% The holder is designed for mounting on a pipe with a diameter of 50 mm. For mounting the side holder: 4 pcs Imb M4 × 20mm for mounting…
These bottle to bird feeder adapters have been around forever - and this is a different design of one. This design minimizes plastic use, and gives other ways to suspend the feeder. Recommend thick string if using ring hooks to ensure…
I edited the holder bracket for the original model to be able to use cable ties to attach it to my balcony. Remix done in Prusaslicer, as PS does not really save all the modifications as STL, i had to include the 3mf. For the holder…
This model updates the base model to add features to it, it therefore requires parts of the base model. There are 2 main piece changes: The locking Truss: In the base model the roof tends to slide off, this model replaces the two outer…
History: I needed something to prevent my Java Sparrow to spill their seeds everywhere in the aviary. So based on the dimensions of the Ferplast Brava 6 birdfeeder, i made this “saver” we all can see on other brands and other birdfeeders.…
Since the original is difficult to print and apparently no one has done it yet, although it is very interesting, I have tried to modify the difficult parts. I replaced the screw cap with a bayonet cap. As a result, the roof had to get a…
Ich habe ein Vogelfutterhäuschen entworfen. Ich habe besonderen Wert auf den Wetterschutz gelegt, damit das Futter nicht feucht wird und zu keimen beginnt. Daher ist das Dach groß und wuchtig geworden. Außerdem habe ich den Boden mit…
Kleines Vogelfutterhäuschen für Meisen & kleine Singvögel Ich habe eine komplett neue Version des Vogelhäuschen designed...schau doch mal vorbei : https://cults3d.com/:4502743 Ich habe ein kompaktes Vogelfutterhäuschen speziell für…
I recently replaced my deck with composite lumber and rail kits. I didn't want to drill holes in my new rail, so I decided to replace my existing birdfeeder. This is a simple design that wraps around a 4 x 4 post sleeve. The rear section…
This birdfeeder bottle adapter was designed for minimal plastic use. Hooks are provided to loop thick string through. PETG recommended.
This adapter is made for this model . It slides into the pre-existing slot and keeps the feeder steady on the handrail. My handrail dimensions are 40mm wide by 11mm tall. No supports are needed.
Adjustable Birdfeeder that supports the standard Audubon Snack Stack or other similar products Printed in PETG. The post was split in half and glued together after printing.
The Size is 25mm and it should be easy to scale it to your needed size. I put the caps in place with hot glue so that they don't disappear again. No supports needed, printed in PETG
This innovative design combines the look of a pinecone and a birdfeeder in one., providing a practical solution for feeding birds. Perfect as festive decoration during the holidays and functional as a bird feeder all year round. Features:…
I have a number of birdfeeders (some with split tops) that this funnel makes much easier to fill.
big hanging birdfeeder, easy to refill and rainproof :) Required parts: - printed Parts (PETG/ABS/ASA) - M8 Rod (at least 400mm) - M8 Bolt (bottom) - M8 eye nut (for hanging)
My wife wanted a small and simple birdfeeder to hang under the front porch awning. Some small birds like to spend the nights during the winter, under this awning. She thought since they look cold and hungry that this feeder would be nice…
The wooden cap of our bird feeder broke apart after around 2 years exposed to the weather. I designed a replacement cap with a heat insert. You also need a 6mm heat insert, an 80mm m6 rod, a washer and a nut (+ a cap nut m6). Printed on…
How to make the seeds/fat mixture. Fill the feeder with seeds, crushed nuts, old bread crumbs, or a mixture of them. Speared over the howl area of the feeder. Don't overflow the bird feeder, stay about 5 mm below the rim. Melt the fat…
Print upside down relative to how it is mounted. No supports required. 4 perimeter, 15% infill. You may want to adjust based on the weight of the feeder.
1. Functionality Seed dispensing mechanism : Controlled flow so birds don’t waste food. Could be gravity-fed or spring-loaded. Anti-squirrel / pest design : Weighted perches that close access if a heavy animal tries. Weather protection :…
If you are using this bird feeder https://www.nabu-shop.de/nigersaaten-futtersaule-metall-oder-kunststoff from the Nabu Shop, you may need this spare part. It is one of my first designs which I made in Tinkercad and I am sure, there is…
Simple birdfeeder bracket for AFCO railing This style of plant hook frequently just attached with screws to the wooden post of a deck, Our most recent deck upgrade moved to AFCO aluminum railing and I did not want to put holes in the new…
This model was made out of necessity, because we didn't have a good place to put the "fat pudding" we received as a gift. We have a lot of big magpies around, we don't want them to eat the whole thing in a few gulps, the smaller birds…
Made by my son for the bird feeder challenge. He made a turnable feeder, with multipel compartments for more food choice for the birds.
Want to have an easy solution for the birdfeeder. The house slides on the feet for easy filling.
Simple birdfeeder. Duplicate Leg (x2).stl once. Assembly: Screw both legs into the holes, and be sure the rounded part is up. Pass a string through the top 2 holes and tie it into a circle. Hang it anywhere you want! Enjoy watching the…
Made this model for a birdfeeder which the cap was lost. The chipmunks were literally eating their way down, so I wanted to keep some food for the birds! Has a snug fit, in my case the opening was tapered from 86.6mm to 86mm at the top. I…
Balcony Railing Mount (42 mm) – Accessory for TrueFruits Bird Feeder Description This model is an accessory / add-on for the TrueFruits Bird Feeder available on Printables. The mount was designed specifically for 42 mm round balcony…
Printsettings: LH: 0.2mm no support(there is support on the strap) infill for the top: 40% I print the feeder in PLA, if the feeder hang in the sunlight, I recommend PETG You need a buildplate at least with 22 x 22cm With base_1.1: I…
How to make the seeds/fat mixture. Fill the feeder with seeds, crushed nuts, old bread crumbs, or a mixture of them. Speared over the howl area of the feeder. Don't overflow the bird feeder, stay about 5 mm below the rim. Melt the fat…
Kleines Vogelfutterhäuschen für Meisen & kleine Singvögel Ich habe eine komplett neue Version des Vogelhäuschen designed...schau doch mal vorbei : https://cults3d.com/:4502743 Ich habe ein kompaktes Vogelfutterhäuschen speziell für…
Sehr schöne Vogelhaus mit Selbstbewasserung, Regentest bestanden, Sehr gute Ausdruck Qualität (Dank PRUSA DRUCKER) Alle teile als Separat .stl Dateien verfügbar… Wir haben schon Herbstzeit und gleich kommt wieder Winter, es ist schon Zeit…
Small birdfeeder Fill the room in the back with birdseeds, and it will fill the front part automatically when our winged friends eats :) Best printed in plastic suited for use outside (PETG etc)
