796 models
The mockup available only has the external shell and lacks any of the gearbox elements that would allow interesting repacks to be designed like what has been done for Sherpa mini and HGX extruders. I completed the CAD based on…
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body. The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. It's designed to be printed in ABS, as the little LDO motors get Hot, and to be attached via a Female-Female M3x15mm (if you have an OS2) or M3x20mm Hex…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
The biter from Factorio is ready for printing. It shares the same scale as all other official Factorio models. You can pick from four different poses. Variants with more complicated geometry are in two parts for easier support access.
3D Print Files for a miniature Arbiter! Supplied in 1:12 scale for FDM printing and 1:48 scale for SLA printing.
The Biter Spawner from Factorio is ready for printing. It shares the same scale as all other official Factorio models.
Scroll down to see the lates update. 24 of June 2025 thanks to our friend Alexandro now we have a new hotend supported. https://www.printables.com/model/1127748-phaetus-dragon-hotend-holder-for-xenomorph-by-cn3d Added the Extruder Sun…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
Rogue Orbiter Tool Head design for the Ender 3 V2 Neo based on the E3D V6 mount (Revo Six, Dragon SF, HF, Dragonfly BMO) and the Orbiter v2.0 extruder. Battle tested and heavily iterated. This is my sixth complete Tool Head design for the…
Voron Afterburner + Orbiter v1.5 + BLTouch for Anycubic Mega Zero & Ender 3 This is designed for use with an MGN12H Linear Rail on the X-axis. I made this compilation with modifications as most of the components I found had issues of some…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…
Original model This support is to be used with my Space Shuttle . Dimensions et Informations Il fait environ 8 cm de haut pour 16 cm de large. Il y a 15 pièces à imprimer. Je l'ai imprimé en environ 4 heures. Conseils de Réglages Infill :…
This is a modified Orbiter 2 filament sensor body that is designed to be used with the ERCF system as an extruder sensor. It could also be used as an ordinary filament sensor, but the sensor the Orbiter creator built is great so I'd…
EBB36 Mount Orbiter v2 with PG7 Cable Gland -- Remixed from https://github.com/KayosMaker/CANboard_Mounts --
Update: 11th Sep 2023 ** Bodies updated for less-shrink materials (Non-ASA/ABS) Update: 8th Apr 2023 ** LED Filament Sensor Cover updated for easy retraction Update: 15th Aug 2022 ** Extruder covers are updated for a better square nut…
Orbiter 2.0 is a great extruder and I have been using it on my Voron 0.1. Now V0.2 is out and I made a mod for it. There are many E3D Revo heater core failed, mine included. I keep using the Revo Voron heatsink but replaced the heater…
I modified the new mini stealth burner to work with the orbiter 2.0 as well as all the released tool head mounts to work with the changes I made. One of the heat set inserts is really close to the wall of the hotend adapter so i added a…
Why? I simply couldn't find an EBB 36 adapter for the LDO Orbiter 2.0 on EVA 3.x, but there was that ingenious mount from @ianwlg so I had to remix it.. ;-) My version makes use of the gained space of the Orbiter 2.0 by moving the main…
Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
Perfect for SV08, Voron, and Voron-style gantry users looking to upgrade to a lighter, more efficient, MMU-ready toolhead. The V5 Toolhead is the next evolution after the popular V4 version , developed in response to community feedback…
Other than prints, You will need: 1x M3x20 - to secure toolhead from behind (not present in V0 BOM, but Trident and V2.4 have them, so You might have some laying around) 2x M3x8 - to secure Orbiter V2.0 30,2 cm bowden tube, between…
Hardware: 2x M4 L20mm 2x M4 nut 2x M3 L6mm (countersunk head) 1x M2 screw Updates: 01/01/24 Added editable files 13/02/24 Tolerance adjustments, Reinforcement in the connection with the duct Print Settings: TPU recommended for the fan…
With some matte filaments, printing at high speed, I get frequent tangle detections. With this support, the tube stays straighter and increases the friction on the tube somewhat by limiting the force on the filament sensor spring.…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
This is a Filament Cutter for the Orbiter V2.0 extruder mounted on the Dragon Burner toolhead. However, it could technically be used on toolheads that have the extruder mounted on the top. Parts are in the prefered orientation already. No…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello 3D Printing friends. The idea for a filamentcutter arose after i installed an ERCF on my Voron 2.4. But none of the existing could…
***Update: Aug 18, 2025*** Added left side cutter. This was actually the original way I did it and was unpopular in the discord during development due to widespread superpinda use at the time. Obviously with the cutter on the left, the…
Smart Orbiter v3.0 5015 duct! no print support! Also has a noise mod to change the noise profile of the orbiter fan (from mosquito to woosh) Fan noise mod does need print support, use tree support Added the Revo version STEP: printables…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
• Fits CW1 and CW2 X-carriages • Works with Voron TAP (use CW2 Carriage) • For LDO and HARTK Afterburner Toolhead PCBs • All screws mentioned are SHCS • There is a tight fit between Orbiter thumbscrew and Stealthburner main body. Feel…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…
The original mount relied on a machined effector plate to fit an original e3d hot end, but this resulted in a 4 mm gap between the housing and radiator, when used with stock radiator. Also, I removed the nut pocket for the radiator. It…
more edits 4/26/24: redid the cover for the spider v1, now with a slightly deeper spot for the part cooling fan (tested and fit okay for me, though a piece of tape to help where the duct fits will help - the orbiter 2 is just too long to…
Made this strain relief for my Xol toolhead, but it will work for any tool head that uses the Ebb36 and Orbiter v2.
EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…
ATTENTION! Since its working fine for me for about 100 hours now, i decided to make a first release. If you find any problems / suggestions, please let me know! You need serveral Screws as well as 2 different types of HeatInserts (See…
This is the first part of the Project Space in which I would like to show the whole lifespan of the Space Shuttle, In the first part, we will take a look at the new and improved version of the Orbiter. This Orbiter model comes with…
Backside mount for the EBB42, works with and without the filament sensor Recommended print settings Use PETG, ASA or ABS for the motor mount, the EBB mount and the cover can be printed in PLA Infill: 35%+ Wall lines: 3 Bill of materials…
Introducing the Umbilical PCB Mounting Plate for the Voron V0.2 3D printer's Orbiter 2.0 extruder. This new mod provides users with a convenient way to install the popular Umbilical PCB mod to their printer's extruder. The Umbilical PCB…
UPDATE BL Touch mount option added. Please select the Extruder Cover and Extruder Body whilst downloading STL ZOrbiter extruder derived from Prusa R6 extruder and fully compatible with Zaribo, Original Prusa and Bear Mods. It weighs 380~…
Edit: 20.03.2025 - add STEP file EBB36 bracket for Orbiter 2.0 I don't like flat and high mounts so I propose my vision. BOM 4x M3 threaded inserts (i use M3 x 3.0) 1x flat head M3x5 screw for install a cable holder 2x socket head M3…
I am just in awww of the response and help that I have received on this project. I am very appreciative of all the help and feedback. Hopefully we can make this modular with a tailor made duct system to fit other extruder options soon.…
This will allow mounting an EBB36 board on your V0.2, the cable can be fixed with a zip tie and everything is designed to be installed without heatset inserts ! There are two versions of spacers : one for Orbiter filament sensor and one…
Direct Drive Orbiter v2.0 + V6 Attached you can find the assembly instructions and Marlin 2.1.1 firmware for this mod. This firmware is for F103 and F303 chip. If you have the last version of Kingroon, you need compiled the firmware for…
Orbiter v2.0 mount should work with any ender 3 style mounting bracket and any style duct as long as it's NOT higher than the ender 3 style mounting bracket. I don’t recommend printing in pla as it will likely crack. Petg and stronger is…
I've remixed a Satsana 5015 to fit with the Ender 2 Pro. Some Modifications made: Optional Orbiter V2 Direct Drive mount Fixed CR Touch mount (My klipper offsets - X:-44.5, Y: -13.5 Z:1) Optional ADXL mount on the side (1x M3 Hole) Print…
A tinkercad mockup between. https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed and https://www.teamfdm.com/files/file/485-orbiter-2-clockwork-beta/page/3/?tab=comments#commen to make the Orbiter 2.0 ready for ERCF…
This model allows the mounting of an Orbiter 2.0 extruder on a Voron 2.4 with a CW2 carriage. The original designs were made by Team FDM users spacelab_2021, sneakytreesnake and Jay_Flo. My modifications consist of closing unnecessary…
If you like my parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Please take a look at the newest version of this cutter This is an evolution of my Dragonburner-filamentcutter. This Model is not fully…
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an Orbiter 2 extruder. The original PUG download page (for the gland itself) is at…
A mount for the Orbiter 2.0 extruder for the FilamAtrix toolhead cutter (note the A in mAtrix) recommended for the BoxTurtle MMU from Armored Turtle. I remixed the Stealthburner Orbiter 2 mod and the model for the Orbiter Smart Sensor for…
i want a mount for the orbiter V2 but what i found its must have an adapter - and i found this Mini Stealthdort and credit to nhchiu this mount looks good for me so i modefied it to hold the Orbiter V2 without any addition and added the…
Toolhead to be mounted on every 3D printer with Linear Rails MGN12H mounted on side (not on top of aluminium extrusion). Remix is adapted to use with Orbiter v2.0 extruder and Rapido HF hotend. On images toolhead mounted on Biqu B1 (if…
🔧 V5 Toolhead – BambuLab Hotend Edition Perfect for SV08, Voron, and Voron-style users looking to integrate BambuLab hotends in a compact, rigid, MMU-ready toolhead. This is a dedicated redesign of the V5 Toolhead optimized for BambuLab…
I've simplified this design for easier milling on a CNC Machine or metal 3D printing. A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. The EBB36 mounting holes are designed to be tapped with an M3 tap. It's…
Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose…
Just a quick modification of an existing design to add extra length on the strain relief to enable it to be used for the Nitehawk36
This toolhead scales down the body of the Stealthburner to a size which fits into a V0.1/V0.2. Fully assembled it weighs about 110 grams less than the original. It is designed around the Orbiter 2.0 extruder and has versions for the…
This modification allows for mounting of the CAN board on the side of the Turbiter. You will need 2 M3 heat set inserts to mount the board. As a Voron 2.4 owner, I wanted to run the Turbiter mod for the Orbiter 2.0 so I could run the…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
This model takes a rather unique approach to cooling, with the fans moved under the effector for the smallest air restriction possible and the lowest weight. Why the Orbiter 2.0? Orbiter 2.0 is a workhorse, praised for its low weight and…
Used bear upgrade files for prusa i3,edited it to fit on ender 3 x axis plate and added mount for HGX light and ORBITER 2.0 extruder. All printed with 0.2 layer hight. use ABS or PET-g Nuts and bolts needed: 3 x m3 square nut (2 extruder…
Modified the 4 lane Pico MMU Hubs to use ECAS04. I wanted a easier way to disconnect the PTFE tubes because I'm constantly changing things on my printer. This also prevents the PTFE tubes from popping out. I've also optimized the filament…
quick way to connect two pcb canbus to existing orbiter 2. I had to unscrew orbiter motor and put it so that motor wire comes from the top and then insert it into sb2209 due to very short cable of the orbiter. You can use two regular…
Updated to v2 for various duct compatibility and issues I encountered over the past few months. 1. Creep problem After using it for several months, the problem with v1 was that the layer direction was not good for pressure distribution…
Designed to work with the Orbiter 1.5 as I have several of these extruders lying around. Any extruder that uses bottom mounting holes should work (Sherpa mini, Orbiter 2.0, LGX-lite, etc.) with adaptation to suit proper hole spacing.…
stealthburner orbiter v2.0 main body LW version
I'm not sure why but my orbiter v2 would collide into the 5015 for all models I could find. (Maybe my fan is wider?) This model allows the fan to be recessed 2mm deeper into the body. The orbiter then doesn't touch the fan. Thank you to…
Public domain model of the Space Shuttle Discovery, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
M3-D5-5mm 5x heat-inserts PTFE tube orbiter2 standard motor cable is too short for motor swap beware connector on motor is different
(z)Orbiter 2.0 Extruder Lite with RHD Fan Duct and optional Rigid Mounting for the TL Dragon Hotend for One-Handed Nozzle Changes This is a remix of the ZOrbiter V1.5 Geared Extruder by ZARIBO (the CAD files for ZARIBO's own V2.0 extruder…
Simple mount for a 42 size can board. Designed for the EBB42, but will work with others. The version with cable strain relief needs to be printed with supports.
the spacers must be cut to fit the orbiter stepper motor; it is designed to put the M3 4.6mm diameter brass inserts: I left a hole to display the led of my USB Type C; the possibility of fixing it with three screws to the EVA 3 support…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Mount for the EBB36 Gen2 for an Orbiter 2.0. Please see the original for more information. This remix has the additional lower mounting removed that can be used with the A4T. I'm looking to use it on a custom toolhead. The original would…
I'm using Galileo for past two years, now converted to Orbiter 1.5 to more compatibility, but no found a step file with CW2 support but some to 2.0… This is based on the best I've found(IMO).
I took this model https://www.printables.com/model/168721-die-unendliche-geschichte-der-steinfresser from Chris_1978 And hollowed it out using openscad and added a plug so I could load it full of pennies for weight then make it into a…
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. The series includes the Dragon, Mosquito and MicroSwiss hotends and the Orbiter V1.5, LGX Lite, Mjolnir and Bowden…
Added cutout on knomi Stealthburner to make room for orbiter2 lever and tension knob.
This is the prototype of the improved version of the Orbiter Filament cutter, which is based on the Sherpamini cutter. I reduced the play in the mechanism and designed a better support for the lever. I tested the function of the cutter by…
This will let you mount your EBB36 if there is no room at the back of the extruder.
The same extruder with linear X-rail: https://www.printables.com/model/1122381-mk3-bear-mit-linear-monorail-x-und-y-achse This is my extruder for Prusa MK3 featuring E3D's Revo Micro and the new Orbiter V2.0. I'm using this design since…
Orbiter2 mount for voron 2.4 r2 ab < BOM > 1. Brass insert(M3, OD 5mm, Length 4mm) 17ea 2. M3x16mm bolt 2ea (Hex sockethead cap screw) 3. M3x10mm bolt 2ea (Hex sockethead cap screw) 4. M3x8mm bolt 9ea (Hex sockethead cap screw) 5. Instant…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Update 11.12.2024 see below! This is an adapter for the Ender 5 Plus with BLTouch positioned at the left or right side or behind with space for the toolboard. The duct and fan are located in behind of the mounting plate in the last…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
Description: Hello 3D printing enthusiasts. I present to you my Smart Orbiter v3 extruder adapter designed specifically for the Creality Ender 7. I faced the challenging task of maximizing space on the Y axis, reducing mounting carriage…
April 2025 we made an update to Spartacus Family and we have moved the LED to the front of the toolhead and we have increased the part cooling ducts. we have bigger vents that flow much better than the previous ones! Spartacus Orbiter…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Hi, This is a complete X carriage design for Wanhao D12 printer. It uses a very light and compact twin blower system for part cooling that can be used as a bowden setup or as a direct drive with an Orbiter V1.5. Designed for a Dragon…
Mount aims to have more contact area with other parts of the tool head, predominantly the stepper motor. Fixtures: Heat inserts M3x4 shorts (additional) 4x M3 bolt; 2x from kit + 2x additional 2x M3 hex spacer (from the kit) PS. Bridges…
(NEW VERSION AVAILABLE) Mount for the Orbiter v2.0 by LDO, easy to print with support material, great for upgrading your Flsun SuperRacer to direct drive. M3 Heat-set inserts are required for the extruder mount, heatsink fan and for the…
Orbiter V1.5 extruder mount to the Creality CR-6 CR6 strain gauge with stock hot end OR MicroSwiss all metal hotend. This is part of a series of different hotend and extruder mounts directly to the CR-6 strain gauge. Most probably these…
Based off of https://github.com/KayosMaker/CANboard_Mounts this has been modified to attach to the EVA3 cable holder and the orbiter attachment holes have been lowered to raise the toolboard up so there is enough space to attach the part…
Orbiter V2 / FLY SHT36 MAX V3 mount with cable guide. The board is mounted with 3x 8mm M3 long Hex nuts. 4mm black PTFE is used to hold the CAN cable.
*** WARNING - This model is complicated and requires soldering, lots of melt-in threaded inserts, and much more. It risks bricking your printer if you make a mistake. It is also a Beta release, and as a result, is under-developed and…
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
