Counting matching models…
Vor- und Nachteile auf einen Blick: + Verkleinerung/ Kompakter (45 cm x 35 cm x 20 cm) + bessere stabilität der z-Achse + schneller Ab- und Aufbau (Montagehilfe) + einfacherer Ab- und Aufbau ohne Werkzeug + weiterverwendung der…
Print approx. €27.55–€33.67 excl. taxPreliminary estimate for one variant
Very easy print with 2 options to print (* see also update) : Print-in-place version with the ball. Shake the ball loose after printing (or pause just before printing from the bottom of the treat compartment and break it loose). Version…
The original cube background panels look wonderful, but I really wanted panels that assemble into a cube and I also wanted to spend less material per panel. So I made my own version. Simply print three or four panels and slot them…
I can't make up my mind if he's trying to wind the stepper or to stop it, but with every revolution of the stepper and every retraction there's a new and random action. Right now I am wasting more time watching him than I did making him.…
This is a bobble head (bobble-brain) Frankenstein Monster action figure. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you can use minimal infill (10% is fine). The brain…
This one is pretty self explanatory. It's a hammer! Use it to tap, persuade, nudge, peck, or even slam printed components together without damaging them. Includes both a large and small flat face for various use cases. I printed it with…
This is simple doubling dice for backgammon featuring a standard cubic shape with smooth edges, each face displaying the values 2, 4, 8, 16, 32, and 64 embossed for easy readability. The design ensures durability and ease of handling,…
Get ready for 3DPrintopia with some bling! The 3DPrintopia bling chain consists of a pendant and a chain link segment. Print multiple chain links and connect them for a long wearable chain necklace and show off your 3DPrintopia pride!…
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
This one is pretty self explanatory. It's a hammer! Use it to tap, persuade, nudge, peck, or even slam printed components together without damaging them. Includes both a large and small flat face for various use cases. I printed it with…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
This model is for the Gemmy Wobbler Series "Wobbling" Piece, it is an offset wheel located on the bottom of the product and attached to the gearbox using a press fit The shaft this mates to is .100 thou and must be tight with no side to…
Why buy a wooden set when you can print a personalized one? This generator creates perfectly sized tumbling blocks with endless possibilities. Make a custom gift with names, create a "drinking game" set with instructions on every block,…
Print from any hard plastic.
Highly recommend using tree auto support with 30% May look bad but I have a really good printer there was just an error and I was running really low on filament and didn’t have enough to do another and the new filament haven’t came yet…
Backgammon Doubling Cube – Multi Color Version Designed for easy printing with any multi material system like the Prusa MMU3
This is a tool for assembling printed discs, so you don't break the threads during assembly. Screw M4 х 50 - 1 pcs. Extended nut M4x7x12 - 1 pcs. 0.2mm layer, 5 walls, 50% infill Check out my collection of wheels for RC cars:…
This is a novelty gold chain with removable magnetic faceplates! Unfortunately, this print requires a brim for each chainlink. That means it will require some cleanup once the print is complete. The better the cleanup, the more…
I found a good screw organizer and decided to add numbers to help me know the order the screws go when i am disassembling and assembling something again.
Intended for the hobby electronics builder, these trays organize the parts used in most electronics projects so that when soldering, you can just grab the part and solder it rather than searching through a pile of parts. Each slot type is…
minimalist wallet resembling a ficsit coupon, requires two elastic hair ties
It is a cool statue of four ravens looking at the bobbling brain. When the brain moves it can look like the ravens are pecking the brain. Also if you move it hard enough one raven will catch the brain under it's beak.
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
Battery case holder for BrickBling Light Kit on Lego Tie Bomber
To print the toy you may need to scale the headband to better fit your head making sure the rounded tips can fit into your ears. The print is stable and does not need any supports but a brim is reccomended.
A quick remix to create a set of alternative upper-floor ruins compatible with the tower base from Makers Anvil: https://www.thingiverse.com/thing:4571327 Category: Toy & Game Accessories
A cute and tiny Christmas tree with wobbly legs. (40mm tall & multi-color -profile available!) The perfect Christmas gift or decoration accessory for your house! Works right off the print plate! (may need some wiggling to loosen the legs…
Just a tiny (30mm tall) Christmas tree, that can be used as an ornament or key chain. It prints in place and has wobbling legs, which drop when you take it off the build plate. Enjoy and share your makes!
Three part wireless Sweep Bling LP case inspired by geist's TOTEM . Without any bumpons attached the case retains the same overall height as a naked PCB build. The case is split into three pieces: a top part, a switch plate and a bottom…
Replacement for wobbling cat toy with long feather wand. Heating the end of the thin rod where the feather is mounting and pressing it into the top center of the part helps it to stay secure.
This is a cover for the Ferris Sweep Bling LP (other Ferris Sweep variants might work too). It is inspired by this model: https://www.printables.com/model/709932-ferris-sweep-controller-cover The main difference being that this version…
identical to original model but can be printed upside down
Description This case is for Sweep Bling MX keyboard . Tested working for DSA and XDA keycap profile. BOM For the full build you'll need 8x M2: 6mm screws Building Instructions For the bottom part, you will need to print it bottom side…
💩 Tumbling Poops 💩 is a fun and strategic tower game where players take turns removing sticks from the tower which has been topped with your 3D printers poop! The objective is to end the game with the smallest poop pile. Removing the…
Dynamic Tumbling Toy This retro-inspired toy uses a bearing and a rotating case to demonstrate physics concepts in action. Watch as the toy tumbles down a track, with the bearing moving back and forth inside the case, while the case…
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game didn't come with one. This sleeve is designed for 48 blocks, that are each 2.85" x .95" x .55" (72mm x 24mm x 14mm), making…
This is a stackable screw mat. I designed it because I kept losing tiny screws while working on electronics projects. The compartments are filleted at the bottom so tiny screws don't get stuck in the corners. I recommend that you print in…
Print with standard Voron settings. Do not forgot that even with this mod you will still lose about 5 mm from original Z height.
Knipex Glass Nibbling Pliers Gridfinity bin 2x5. Not perfect but it works. Extra cutouts for whatever you want to put in them.
Guide made of TPU material for the Z-axis at the top so that it does not wobble.
Widened the USB C port hole (modded type c variants) Blocked the trrs jack hole (wireless variant) Added holes for tenting to the bottom plates.
For when you want to feel like you're scheduling, but not actually open Primavera P6 . This chunky play button fused with a pocket watch is the physical embodiment of “Let's get this schedule moving”; minus the software crashes. Inspired…
Hi, another vertical shelf stand for 7590 Fritz!Box, made in 3 parts, just in case you have a lot of cabling i suggest to use also the front cover. Vertical stand since the hot season is arriving and this the device seems an heating…
Ich habe es in drei verschiedenen Farben gedruckt. Außerdem liegend platziert und dementsprechend die Stützen aktiviert, damit die Schrift nicht in die Luft gedruckt wird.
domino sets in 3 different sizes! print with 50-80 percent infill for optimal outcomes. Don't forget to post a make!
Got champagne taste and a PLA budget? Roll out your fanciest clear filament and crank out a Budget Bling diamond that sparkles harder than your last pay-raise. It’s a low-poly riff on a round-brilliant cut. Perfect as a paperweight, photo…
This Bling Ring is printed in two parts and glued together. I used gorilla glue, but super glue should work as well. I found it easiest to place a drip of glue on the diamond tip, then set the ring on the diamond as it sits on a flat…
Gambling spinner is a group game.For example,if four player play the game,all players start with equal amount of coins.Before the first round every player must give one coin in the pot just like in Texas hold em.When the game start,every…
This is a fun, modular ring print. The ring base and bottom portion (bezel) of the jewel should print in an opaque color, while the top portion of the jewel (above 4mm) should be printed in a translucent filament to allow the LED to shine…
A goofy–creepy zombie shambling forward with outstretched arms, ragged clothes and big sneakers. Perfect as a small Halloween decoration, a painting practice mini, or a fun desk buddy. Designed to print as a single piece and to stand on…
Early-revision MINIs in enclosures ran into heatbed thermistor failures with stock cable routing. Created a short tube with a 90-degree bend, and a ring to keep it closed and the cable contained. Modified the top & bottom heatbed covers…
Die Zeichnung besteht aus 2 Objekten. Der Slicer kann sie in einzelne Objekte Teilen. Druckt aus TPU und mit 100% Infill damit die Masse stimmt. An einer Seite ist eine kleine Ausnehmung, da passt die Rutenspitze beim Transport rein. Bei…
This tiny garden scarecrow adds a cheerful touch to your outdoor space while gently keeping small birds away. Easy to print and assemble, it’s made of three parts: a base that you can gently press into the soil, a central support, and the…
A witch's bubbling cauldron - but she's got a secret! The bubbling top is detachable and the inside is hollow - you can hide some candy (or a terrible secret!) in there. It can also be scaled down and used as a miniature. Enjoy!
Mariners fans — here’s some bling for game day! This multi color print uses the classic old school Mariners colors, but feel free to mix it up and make it your own. The included .3mf file has everything you need to print — it’s already…
i made this for a friend and some games he was putting on but thought i'd post it for the points
This large mouth 8" dia. funnel screws directly to the media container and any other similar container with similar threads. Media is messy to transfer. This funnel aids in getting the material back into its original container. I printed…
Staibiles Standteil, bewegliches Teil zusammen kleben mit ein 608 Standard Kugelllager.
Hi all, I have the ultimate solution to the problems of wobbling of the Z axis for the printer Geeetech Prusa I3 X with acrylic frame. Simply using a hole saw, freed the two threaded rods and magically disappear the problems of wobbling.…
Snellen created the “Tumbling E” chart for individuals who couldn’t read. This eye chart was made of different sized rows of the capital letter “E,” pointing in different directions. The patient simply had to point to which direction the…
This ring makes a fun party favor. Print the ring out of a silver/metallic filament and the “gem” out of translucent filament, slide then glue them together, and you are good to glow! While the “gem” and the front of the ring slide…
I'm not sure on the origination of this version of dreidel but it is a fun game to play with your family and friends. Typically it is played as a way of gambling that can be as inexpensive or costly as you would like. The rules are…
Needed to put a largish hole in the side of a table to access the ethernet port on the wall (Table is hard up against the wall). This grommet neatens up the hole in the waffle board desk leg material. You should be able to scale it in the…
Endhaken (3D-Druck) – Kurzbeschreibung für Nachbau Der Endhaken wird im 3D-Druck gefertigt, idealerweise aus PETG oder einem vergleichbaren Material. PLA funktioniert ebenfalls, ist aber weniger robust. Zubehör: mindestens 2× M8-Muttern…
THIS IS NOT A JOKE! I strongly suggest you guys open up the back panel to check your Qidi Q2 machine first when you have recieved it. There is an assembling faulty which could happen on your Q2! By default, the toolhead cable in the back…
I made this as my friend Zach designed this game, but the insert that it comes with isn't really useful. I split it into three parts to better fit on my printer. The insert is the large part, and the spacers help center the insert in the…
This model is for the Gemmy Wobbler Series "Wobbling" Piece, it is an offset wheel located on the bottom of the product and attached to the gearbox using a press fit The shaft this mates to is .100 thou and must be tight with no side to…
This is a bobble-head chicken toy. It uses a 3D printed spring and 10mm google eyes fit into it. The base is large and can hold a 10mm magnet (glue may be needed) . Prints easily with no supports and minimal infill. Looks best if you…
INTERIOR DECORATION: Assembling the pieces of the ‘Organic Puzzle’ Description I’m not sure how I came across this image of a jigsaw puzzle made up of four pieces. I thought that if I redesigned their front faces in an organic style and…
Why buy a wooden set when you can print a personalized one? This generator creates perfectly sized tumbling blocks with endless possibilities. Make a custom gift with names, create a "drinking game" set with instructions on every block,…
Made by request some time back. May as well post it. Will need supports bc the pattern wasn't designed to be printed in this direction, but it is what it is. Also added a couple alternate versions that shouldn't need the extra supports
Here's my take on the Frosthaven summon (from the starting class, the Boneshaper), the Shambling Skeleton! I did my best to make this guy as printer-friendly as possible, but as you can see, it still needs some supports. That said, it's…
Print from any hard plastic.
Get your bling on for the biggest human show on earth. Feel free to copy and update on your own (Fusion 360 link), and experience the horror of my design skillz. I printed mine on SLA with tough resin, but I expect it'll print nicely on…
Highly recommend using tree auto support with 30% May look bad but I have a really good printer there was just an error and I was running really low on filament and didn’t have enough to do another and the new filament haven’t came yet…
Backgammon Doubling Cube – Multi Color Version Designed for easy printing with any multi material system like the Prusa MMU3
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) TIM & TOM (SIDEEYE…
Used the Winterhawks SVG out there to make this MMU3 friendly print. All components occupy their own space so color is consistent to assign in Prusa Slicer. Keep the priority as shown in the 3mf file. This is designed so the colored bits…
A quick easy shoelace charm, no supports needed I printed it in pla with 15% infill and 3 walls.
Notes I use T6 M2 8mm countersunk screws because IMO Torx > Hex. I had some trouble with printing the countersunk holes. It could be an issue with my printer or with the model. Anyway, if the holes are obstructed just push through a M2…
Diese einfache Haltevorrichtung für die Spulenkerne von wiederbefüllbaren Filmpatronen erleichtert das Zerlegen und das Zusammenbauen der Klemmvorrichtung. Einmal nur als kleiner Block und einmal mit einer Tasse rundrum damit die kleinen…
I switched out the stock chainring on my Bafang BBS01B to a Lekkie Bling Ring to get a better chain line. The Lekkie Bling Ring does not come with a chainguard, and the stock chainguard would not fit the Lekkie, so I created this. This…
My approach to absorb the wobbling of my lead screws at my CubeAnet8 https://www.thingiverse.com/thing:4804870 using the very basic Anet A8 lead screw, I came up with this design. I now created a generic version and included the FreeCAD…
This is a wall decoration that I design this for me and my brother. Simply insert the name of you family and print.
Die Blätter haben eine andere Höhe, als Schrift und Rahmen. Es kann also ohne MMU zweifärbig gedruckt werden.
![Foldable [PMFC] Prusa Mini Fast Compact Mobil Transport Assembling Mod/Kit/Addon for hand baggage](https://media.printables.com/media/prints/136275/images/1299962_76a63b45-4b6d-40e0-b4e5-a0495be4773b/img_20211208_181711_578.jpg)
