453 models
Poppy Playtime Handheld GrabPack – Improved Remix 🛠 About This Remix This remix introduces several improvements over the original design, focusing on appearance, durability, and ease of assembly . ✋ Redesigned Hands The hands have been…
Bist du es leid, die Becher manuell zu befüllen und dabei wertvoll Zeit zu verschwenden Bist du es leid, dass nach einigen Runden das Befüllen zur Tortur wird? Kiwi12_34 bietet dir eine Erlösung mit dem BpK befülle die Becher in noch nie…
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
Hi there, I would like to share my first design for the BOSCH eBike Battery Charger BPC3400 4A Charger Model No: EB12.110.001 Have fun with it! I used 4x40 screws and 6 dowels When you screw it to the wall, don't overtighten!
Piglet Ferdinand, familiarly called Ferda. A cute companion for every home. I also added models with three different possible butt tattoos. A heart, a four-leaf clover and a piggy. No support/no special settings.…
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ... This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures…
A small clip which allows P1P owners to hang the side mount spool holder by wpbhelps on the side of their machine. Along with a clip that hooks onto the next bar down to help put the spool holder in a better alignment. Also added a ptfe…
The case has four parts: main case top cover back cover led light carrier pieces To fully assemble the case you will need some self-tapping screws to secure the mainboard in place and also to secure and fix the rear cover to the main…
Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
Deutsche Version: Dies ist eine kleine Farbmischpalette, die über den Daumen gestülpt werden kann. Sie soll das Arbeiten mit gemischten Farben beim Malen erleichtern. English Version: This is a small color mixing palette that can be…
Front Crank Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda B6/BP 1.6/1.8 engines (except those with the small nose crank) Simply start the seal on the front crank nose, then slide the tool in place and gently tighten down the…
Rear Main Crank Seal Install Tool for Mazda Miata MX-5 B6 BP Engines As seen in this video: https://www.youtube.com/watch?v=T0L0Rpsbdek
A printable trolley token for UK supermarkets. One token the size of a £1 coin for trolleys that require the coin to go completely in and a double-ended one for those that push in from the side.
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
Lab bench power supply based on https://www.thingiverse.com/thing:3831773 But since I didn't need all the features and I wanted a different design, less features but even more compact! Bill of materials in pdf format Pack and go available…
Cam Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda BP 1.8 engines (except VVT intake cam - I have a separate tool for that) Untested for B6 1.6 engines but possibly suits those also. Simply start the seal on the camshaft, then…
Update 04.01.2025: Replaced with an updated version: Aeon Trespass: Odyssey - Improved Battle Tray for AI/BP Cards . Same functionality, the updated one will take much longer to print, has support for 1 primordial using Tarot cards and…
A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…
Mini ITX NAS with external power supply and 6 HDDs bays. Print parts with 30% infill and 0.20mm (Standard Quality) The dust.stl must be printed without top and bottom layers and with 75% or more infill. The…
Compact wall mount for Bosch ebike battery charger 4A BPC3400 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
I couldnt find a fitting wallmount for my charger so I got enspired by this one: https://www.printables.com/model/287990-holder-for-bosch-charger and designed my own. You can print it without any supports if oriented on the angled side >:)
it is a very good grabpack model for dummy 13
print dummy13 first after you done that print backpack, 6 ropes, 2 grabpacks and 2 hands for full grabpack print parts of grabpack how I showed on images or grabpack will break after 1 minuta Im gonna model other hands after I finish…
Gameboy Pocket Cherry MX Keycap
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
Ultimate whistle for Guide & Scout, celebrating the international brotherhood inspired by BP and Olave's love
This is a battery holder from the Dnipro-M brand, model BP-240 . These holders can be screwed to the wall of your workshop with the help of screws and holes located on the holder. The holder repeats all the shapes and protrusions of the…
Tray to be used during battles in Aeon Trespass: Odyssey. This will be quite unique to this game, but is VERY handy to help organize cards during play - during the dozens of battles of this epic game - and to help with the escalation…
It's just a support for my airbrush compressor. It might fit to other compressor as its generic. Category: Art Tools
I couldn't find a matching 70W charger. Fits pretty snug, but doesn't slip. If you have trouble fitting it, try scaling it up by 0.5-1% Printed with Fiberlogy Impact PLA, 60% adaptive cubic infill (probably overkill)
As it is sometimes not so easy to drill holes exactly perpendicular to a plane with a cordless drill, I have developed a drill guide for my Makita BP453. With comparable guides, I didn't like the fact that the counterforce of the spring…
Hello there, this is an dual hose adapter for the Beko BP209H portable air conditioner. It fits perfect with some duck tape or silicone. Printed with some big printer e. g. Anycubic Chiron. Print Settings Printer Brand: Anycubic Printer:…
Ich habe mir hier ein Akku Wandhalter oder Deckenhalter für den Festool BP-XS 10,2V Akku Konstruiert --------------------- I have constructed a battery wall mount or ceiling mount for the Festool BP-XS 10.2V battery
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
I built A Better Poop Chute (ABPC). This Bambu Poop Chute holds onto the back of the printer with magnets only, and has smooth radiuses throughout to ease any chance of poop constipation. Magnet size is 8mm diameter, 5mm tall. They can be…
A Grabpack model with Mini 13 hands. Supports needed? Yes. Skirtbrim needed? No, unless you have trouble with adhesion
Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.
Cam Seal Install Tool - Mazda MX-5 Miata BP for the Intake Cam Suits the Mazda MX5 BP 1.8 engine VVT intake cam (I have a separate tool for exhaust cam) Included both STL and OBJ versions of the same model. Simply start the seal on the…
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
Upgrade your RC plane, Piper Cub or other Bush plane with grass wheels for faster landings! This upgraded tire is 65mm wide and uses the same wheel disc as the standard (original) Piper Cub wheels. > Print with 0,4mm, 0,5mm or 0,6mm…
Printable PCB (PCBPrint) for testing a single Cherry-mx switch. Also, a simple keycap is included (Designed with FreeCAD) Print instructions You can find more information in the github wiki:…
A case for the dumbpad (hotswap RGB edition) providing a full enclosure with a slight angle. The top cover must be printed upside down with support enabled. All other parts can be printed without support. No screws required. Self-adhesive…
Included are 5 simple wind tunnel test articles for the Modular STEM Wind Tunnel , intended for use with smoke visualization to concisely demonstrate the concept of streamlining and show how the wakes behind different geometries can vary…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
The outer diameter of the carbon fiber tube is 24mm and the inner diameter is 22mm
I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…
For my bike charger I found a.m. charger wallmount. The basic function (holding 4A-charger and mains cable) were excellent. I added a plug holder sidewards for the battery plug. So everything is safe! After installation I saw that the…
This is a re-designed insulator for the 9 element 144MHz LFA PBP Yagi. The former insulator has a flaw. Birds, wind and virbration in the antenna makes the directors turn, which is very unwanted effect. The re-designed insulator fits over…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
I redesigned the motor support of the 3DLabPrint Piper J-3 CUB already equipped with the hole to pass the power cables. I recommend printing it in ASA, ABS or even PETG so it can handle the heat generated by the brushless motor.
You can find two models. One in diagonal that saves filament and improve the details without supports. I print both models without supports with 0,4 and std configuration
Connects the Milwaukee Backpack Vacuum to Hilti Tools or other tools with 34-37mm inner diameter. One Holder is a clip in place style and works for both adapters. The other one is nearly closed to drop ONLY the straight one in. The angles…
This is a 10 inch ½ U mount for the LG BP60NB10 Ultra Slim Portable UHD BluRay drive. Updates 2025-10-08 Made the bottom plate solid with grooves for the drive feet Added 2 new versions of the mount Standard version has the mounting holes…
This is a cover for a Victron Battery Protect BP-100 low voltage protection, so that something does not close short by mistake. The cover can be easily put on the terminal screws. Dies ist eine Abdeckung für einen Victron Battery Protect…
Just a few tags to stick on the mattebox whenever the AC changes camera filters
Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540. This one has prop access when mounted. Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller. Uses M3 Heatset inserts with M3x20mm screws. The tip…
My filament swatch box with 6x2 magnets. v2 - added window to see samples when box is closed
Wallmount for BOSCH_BPC3400 4A eBike Battery Charger, Remix from arminth and FuWeissingers Wallmount, with Plug Holders on both Sides . Printed with Das Filament PETG clear, 25% Infill, no Support needed. Prusa MK3S+ 0.6 Nozzle / 0.30mm
This places the center of the chuck in the anchor 2 (0, 0) position. Print the subplate on an angle (30 degrees is ideal) to given it higher shearing strength, and be careful when installing the chuck to not over do tightening it. The…
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
This 1U module is designed to support the Banana Pi R4 in a 10-inch rack. It is a remix of the original model found at https://www.printables.com/model/968222-banana-pi-bpi-r4-rack-mount-module. The original model was utilized to get the…
Same mechanism and assembly as all other hands, only with the blue hand added. I will be actively working on the purple and omni-hand models from now on, but feel free to contact me! :)
Two models, same design. This is a woggle featuring the Baden Powell (BP) logo, which we use in my Scout/Guide community (Santa Teresita del Niño Jesús de Martínez, Buenos Aires, Argentina). I have adapted it for 3D printing. No supports…
stiff Thumbick (1.8mm), printed in Prusament PetG, it works very well after some smoothening and sanding the surfaces which have Contact to the strings, with a Hairdryer it can be adapted to a perfect Fit.
General Information These adapters provide an interface between the angled rail screw holes on the TFL XR WTF rails and a C&R magnetic mount fender or FM stock XR fender. Allows the fender to sit flatly on the rails instead of at an…
This is a mount for the Runcam ThumbPro, to be printed in TPU. This case will fit a regular GoPro mount. Lay it down on the side, flat side down, curve opening to the top to print. Support only around the screw hole.
Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…
Streamline your productivity with the Dumbpad v2 Case – a minimalistic, yet functional 4x4 macropad housing with a dedicated spot for a rotary encoder. Designed to complement your Keychron keyboard, this case marries simplicity with…
This hand can be used to scare away enemies like the Mini Huggies and Ruined Critters, light up dark areas, and burn certain resources, such as rope and Liquid Nitrogen canisters and can also be used as a prop for a costume. This hand has…
Remix of the Case listed on the Dumbpad Github (https://github.com/imchipwood/dumbpad). The angle of the new case is 8.3° to match the Logitech K120. If anyone is wanting another angle, let me know and I'll knock up a new file.
einfacher Wandhalter für das Ladegerät in Garage oder Keller.
A full reference model for VOW XR style frame… because Auden's had too many weird things going on.
This is a simple LabPack for use with the Modular Low-Speed Wind Tunnel for STEM Education . Here, you are invited to use smoke visualization to observe the airflow around some common “ vortex generator ” (VG) geometries. These devices…
*Notice: For anyone that downloaded the model before Dec 20, 2023, I made a recent update to the catch clips that makes them grab onto the bearing better when they are pushed out of the hub. I was NOT quite pleased with how little force…
A battery cover replacement for the Game Boy Pocket. This design is by me, inspired by Wurmatron 's battery cover design. I used Alibre Atom3D for the design and included the original design file in the GBP Battery Cover_Alibre.zip file.…
Remix of the OG to support a 16" macbook
Created this from one of the retract bases that came with the 3DLabPrint Vought F4U Corsair 1.9 m printable RC plane: Vought F4U Corsair – 3DLabPrint , so it is technically a remix of that base (which is only available from 3DLabPrint).…
This modification is a kit and does not require you to mess around with the SBF blaster electronics. All components are mechanically fastened, therefore this modification is reversible. You may adjust the length of the m3 screws and the…
Moza HBP mounting pattern for drill
Simple case for a Banana Pi BPI-P2 Zero with PoE add on I printed it in PETG, it gets a little warm with the PoE ad-on
Dumbpad case remix for oled module
Storage plug to not damage the fins of your SBA3 while in storage. May have to mess with the scale by a few percent to get it correct. I did not have the physical brace on hand when creating.
A simple wheel cap to glue onto the factory rim of the 3DLabPrint Piper J-3 Cub. I used a low-profile, button-head machine screw to attach my rim to the main gear legs.
The Zero (https://3dlabprint.com/shop/a6m2zero/) is amazing and very fun & easy to fly model! However, I felt like adding a few upgrades here & there to make it better meet my needs. This is a work-in-progress post, I'll keep adding new…
My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…
Used the Radiator STL from "RC Spitfire Accessories" unchanged..'remixing' done in the slic3r. Loaded the radiator in to Prusa's Slic3r PE twice. Scaled each one to 216% Clicked 'Arrange' Selected one and rotated it 180° so were facing…
The Banana Pi BPI-R4 is an inexpensive, very powerfull 10G router. To mount it in my homelab server rack I designed this module for the DAP 2U Rack Mount Panel . It has a small hole to the left of the SFP+ ports, so you can see the SFP…
Presenting the Park-Blob-Poop-SV08 [PBP-SV08] ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it…
battery holder for 4x Canon BP-511
I really tried to make it like the game model but kinda failed, but the cannon is good and the really cool feature (I think at least) is there is a pin that you can slide into the holes to swap hands (I will add more in the future), but I…
fits fine onto existing landing gear
Durable contacts protector cap for Leica M10 camera BP-SCL5 battery. Helps to prevent short circuit and keeps battery contacts clean. Two caps can be used on both of BP-SCL5 battery ends for extra protection from dropping damage. Print…
The printed part fits a Runcam thumb pro, and can be attached to small bases like the GEPRC for the naked GoPro from GEPRC. Screw size is M2 Print in TPU, lay it on the flat size with the curve opening to the top. Support only around the…
No supports required.
Design Both the Banana and the Raspberry Zero are great little devices but especially the Banana definitely needs cooling, active if possible. An antenna to improve WiFi connection is also an add on you might want to have. This design…
It's my own remix of the stand P51-D Mustang RC plane stand by 3dlabprint. I printed it with Polymaker PLA+ Black; 3 walls; 20% infill cubic; I recommend printing with a minimum of 4 brim to avoid lifting the piece from the bed!
EBP Reborn - Ender 3 / Sherpa Mini / Volcano printhead Original K3D EBP model by Sorkin has been significantly reworked to achieve following goals: more compact and lightweight design improved balance by moving motor to the back of X…
Two versions available: long and short. Print with the flat side on the print bed. Printed from ASA material.
Joe N style alignment, where instead of pins it uses the anchor, makes it much easier to cutout. Just make sure to apply pressure towards the anchor2 corner while screwing it down. The bolt needs a M14x1.00 thread to secure the chuck from…
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
![[Remix] 16 Inch MBP Under Desk Dock](https://media.printables.com/media/prints/f63a6136-4179-40ce-9614-c4af6d6d6111/images/10274780_9a2c0b6a-b90a-45d1-b76a-1a574c46f85c_c4fe6d5d-d289-4b2b-b68c-9fc6dc0f8d66/pxl_20211231_192258308.webp)
