Counting matching models…
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes have a diameter of…
Simple bracket to hang the Elegoo Saturn 4 Ultra print plate to allow resin to drip off.
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…
Hello, I've created a low-profile bracket for this annoying 25mm fan. This is the second version of the bracket. I'm sharing the model now because I finally received new fans and was able to properly test its performance and it works as…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
Strong corner mount brackets. Mounted using screws d=3mm :)
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/161705#profileId-182405 Collection of brackets and braces of different sizes and types. NON-COUNTERSUNK version here:…
A compact, modular Bracket for DIY 18650 battery packs. Brackets easily click together, but hold firmly. If your battery is slightly thicker than usual, a bracket might crack while pushing the battery in. In that case just scale the model…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
After i made the Ikea Lack enclosure for my Original Prusa i3 MK3 i noticed a lot of noise during printing (more than before i had the enclosure). I identified that the problem came from the instability of the stacked lack tables. With…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Durable Brackets Collection, designed for M4 / M5 Screws. Enjoy. Layer height 0,20 Infill 15% Perimeters 3 Standard noozle 0,4mm Material PETG Supports No
Shelf holder for repair wardrobe shelfs.
This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…
Due the new printing platform design for the Elegoo Mars 5 Series clean the resin could be more difficult. This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with…
The Strong Corner Bracket is designed for reinforcing corners where three panels meet at 90°. With dimensions of 50 x 50 x 50 mm , it includes screw holes suitable for screws with a diameter of 3–4 mm . To reduce material usage without…
Each corner bracket is designed to be mounted using 4 screws with a diameter of 4 mm , providing a strong and reliable connection. Features Strong and durable design Uses 4 × Ø4 mm screws per bracket Chamfered screw holes for a clean…
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Some simple shelf brackets. Use flat head screws so you don't split the layers Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: who cares PLA/PETG Black Notes: print…
I wanted a stronger lack bracket. Print instructions 40-50% infill 3 Walls I use PETG, and 0.3mm layer height. 4 x 25mm screws works fine.
This is a 20° bracket that guides the ptfe tube of the P1P to run the same as X1/C. This can be used standalone and as part of the Arc for the P1P. The holes for M3 are meant to be self-threaded so I do not need to use an insert. The hole…
Mounting bracket 90 degree angled heavy duty version Use four countersink screw to mount it Print it laying down, the overhang should be no problem. To get it more sturdy, use denser infill 20%, rectiliner. Maybe 3-4 vertical shell…
These brackets were built with the purpose of storing the maximum amount of filament in the least space possible (the unused area to the side of my printer) while also bringing a little flair and color coordination to my LACK stack. Each…
This is an experimental bracket supplied by Bambu Lab for testing. It helped me, but your mileage may wary. The bend of the tube is extremely sensitive and may prove too much resistance for it to load or retract properly. Do note that the…
6 different sizes M3 corner mount brackets: 25x25, 30x30, 35x35, 40x40, 45x45, 50x50 mm ( Parametric STL )
This shelf bracket was designed by me, I am an architecture student and I love creating models of elements related to architecture. You can check out my profile to find more models like this. You can print them very easily, not many…
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
When I did a big upgrade to my CNC router I needed a bigger drag chain. Since I couldn't find an existing one that I like I designed my own. I really wanted to have removable closing clips and that's also the main feature of my design.…
Heavy duty wall bracket for shelves. When properly attached and shelf no longer than 35cm, the bracket can hold up to 100kg. (I carefully hung onto one of it with my body weight and it held without any problems. The holder can certainly…
Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…
Shelf bracket. 2 holes for 4.5mm screws.
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…
Mount your Airsense 11 CPAP machine to the wall to free up night stand space. Water reservoir is easily accessible. Incorporates hooks for holding the tube up. I printed this on my Ender 3 V2 with .28 resolution, 3 walls, 5% infill, using…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
So, I had purchased some of those decorative “floating” shelves from the local bigbox hardware store. Then when I went to install the shelf, I realized how cheap this stuff is and how bad the design of the hidden bracket is. I felt as…
Simple 18650 brackets to store your batteries safely, brackets can be connected together using the tabs on the side. Printing The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed…
These are the files provided on the storage that comes with Sonic Pad. In case you deleted them or if you want to print the bracket that matches your printer before you receive it. Edit: I've added more file available from Creality…
This 3D printed wall bracket is designed to support wooden shelves in a stylish and functional way. With a sleek angular profile and a central cutout, it combines strength and minimalism, making it ideal for modern interiors. The bracket…
These are some fantastic sawhorse brackets. The idea was to create something 3D printable that matches the design and functionality of store-bought saw horse brackets. Why print it? Well… I needed a set and why not? These brackets proved…
Simple shelf brackets with access holes for screws. Surprisingly, I did not find a bracket on Thingiverse (where this was originally posted) that I was quite satisfied with, so I designed my own. The access holes are enlarged to allow for…
One minute introductory video for my Bracket for Wall Mountings: All four sides are tapered so it is easy to slip things on and off. There are holes for two screws/nails, but only using the top one will work unless hanging something that…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
Introduction/Support Me: If this 3D design helps you optimize your PC's cooling, please consider hitting "Like" on this model file! Your support encourages future designs. You can also support my work by purchasing items for this setup…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
This is a clean and simple Milwaukee Packout Rail bracket. It is probably the most cost affordable design out there as there are no addition screws, nuts, or extras to purchase. Print Instructions: Please print 1 at regular orientation…
General information Simple mounting bracket for Nema 17 stepper motor with holes for 4mm screw. Print instructions Layer Hight: 0.2mm Infill: 20% Supports: no Nozzel: 0.4 is recommended
Download the Fusion 360 file and enter your custom dimensions (Modify, Change Parameters in the Design Workspace). I just recently got myself one of these neat electronically height-adjustable desks. With this purchase came the necessity…
A compact and strong corner bracket available in two versions : one for M3 screws and one for M4 screws . Ideal for reinforcing joints, small assemblies, or lightweight structures. Printing recommendations: Material: PLA or PETG Layer…
Update: Now featuring multiple metric sizes, with imperial versions linked below. This is a replacement 5mm shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the…
This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. It can be printed without supports (big, flat side down) and features a 4mm countersunk hole for attaching. Print pictured used the following…
Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…
Compatible with: Extruder : SKU M3201 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers SKU M3203 - Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition) Hotend:…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
CAD model, 9.75" wide, 8" tall, 1" thick along the main section. The corner screw hole boss is offset so you can attach a screw to the wall/shelf. The upper wall screw is angled so that if you have the lower hole lined up with a stud, you…
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…
I designed this wall mount for a Fritz!Box 5690 Pro using Tinkercad. I printed the model in PLA without supports (5 walls, 25% infill). However, I recommend using PETG or ASA if available. Note that the STL file needs to be mirrored for…
I recommend printing from ASA but PETG will also work. 0.2mm layer height. 4 or more perimeters will make it stronger. I also included a variant for printing laying on the arms (as a pyramid) so that the orientation of the layers makes it…
A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…
Well, I did it again. What began as a simple remix turned into a week-long project. Long story short I was trying to do a relatively simple remix but ran into issues with some oddities in the original model (example: a 10μm triangular cut…
🔧 Version 2.0: Reinforced & Print-Friendly The original design is unchanged. The structure has been reworked so the bracket is stronger, easier to print and easier to mount . Thicker body: now 15 mm instead of 10 mm for noticeably higher…
You can use 1 or multiple of this screw to prevent wear on the PCIE slot for your GPU. It will not melt if printed in PLA.
no support no bridging stronger design there are two sizes: 34x34x20mm 34x34x40mm print time around 20min
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A corner bracket for Ikea Lack table to prevent moving and squeaking. Makes the tables more rigid! Holes are 6mm in diameter. Print instructions Unassociated tags: cornet bracket Category: 3D Printer Parts Print Settings Printer Brand:…
Wanted to move the spool holder off my printer to reduce vibration so I designed this simple wall mount bracket. Installation is simple, drill holes and slide the inner piece onto the outer piece ("bottom" text should face down on inner…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
Bracket for the free screw hole on the right Side. Only mounted with one screw. For the G-Sensor of the Sonicpad
This is a print for a bracket to mount a hose. This is designed specifically for the ResMed Climate Line Air 11 hose but as most hoses are universally sized I'm sure this will work for most. I included two prints, one has an inner ridge…
A stylish shelf bracket for mounting a shelf onto a wall. I recommend printing with PETG to prevent sagging. I printed it using Prusament White PETG with: 5 perimeters (0.4 mm nozzle) 10% gyroid infill. No supports are needed. The shelf…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
A 120mm fan bracket for 3x 5.25 inch bays. It mounts with M3 screws just like an optical drive or other 5.25 inch bay accessories. This is a slightly refined version of https://www.thingiverse.com/thing:2446552 , with many dimensions…
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
A modified version of Fabian's DIN Rail Bracket to push some M3 threaded inserts into the holes. The holes are now 4mm wide and I added some material around one hole, so the inserts won't stick out.
2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…
This is a mount for use with the Raspberry Pi Pico for the Gamecube. Mounts to the right of the original fan, using the original screw. My setup (not the one in the picture) includes the Noctua Fan, and it's mounted into the original…
This is a set of some commonly used connectors with the 15-series 8020 bar. Components: 4301, 4-hole inside corner bracket (this one is a bit bendy, consider the gusseted version) 4302, 2-hole inside corner bracket 4307, 2-hole flat plate…
NOTE: This design has been superseded by my latest remix: https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix I believe the one above to work better! But if the one above doesn't work for YOU, it may be…
Modified for 5mm wide slots, otherwise it's the same model. prints without support, and works best in PETG
KEY BENEFITS: strong compact no print supports (optional) can be reinforced with M6 washer (optional) 3 marks (5mm) for offset from the wall
Please feel free to support me so I can create and share more. Any amount is much appreciated PayPal me I've seen that a lot of people have issues with the 3M tape on these LEDs. So not wanting to go onto my roof more times than I have to…
The mounting holes for the BTT Pi 1.2 are measured directly from the STEP file in BTT's GitHub repository, as they differ slightly from a regular Raspberry Pi. To mount the boards, you will need: four M2.5x8 screws (or M2.5x4 when using…
This is a Wago 221-415 Mount for my DIN Rail Bracket. You can find the bracket here ! There are several versions, for 2, 4, 6, 8, 10 and 12 Wagos. STL and STEP files are without labels and can be edited to your needs. For the DIN Rail…
![M3201 Ender-3/CR-10 [Micro Swiss NG Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/708060/images/5554855_c8f0442f-02a2-401d-a399-6c8e5d4b0216_3490802f-a225-4f60-a8a5-b4a7a32cb31d/image1.jpg)
