Counting matching models…
VORON StealthBurner HEX-Face Update 25/12/2023 Rapido UHF Update 20/08/2022 final_version of SB **** Can be printed with MMU2 or can be done manually colors change with 2 differents gcodes need to import the files like MMU2 print even we…
You need to print the Stealthburner files from the Voron website: https://vorondesign.com/voron_stealthburner Download the Stealthburner_Main_body and the desired files for the toolhead you are using. You need M3 hardware and M3 inserts…
Fixed version of linked Thingiverse project. Printed on Bambu Labs X1C using Hatchbox Wood Filament. Use supports for the shields specifically and anywhere else you feel like it would be beneficial. Mostly default print settings for Bambu…
Updates 31 may 2024. Fixed the issue with the wall thickness of the Ducts . ⚠ Disclaimer: before starting printing, make sure the extruder motor on your printer has side screw holes. To check this, you need to remove the stock extruder…
This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body. The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and…
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
The Latest D3vil Burner for Knomi V2 !! Introduction D3vil Design Burner for Knomi V2 , this model is made with lower colling ducts ( i will try to update it with a higher version later. Features - Drop in replacement for the Creality K1…
The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…
Sam Schmidt from the Voron Facebook group designed an adapter for the Bambu Lab hotend for use in the Voron Design Stealthburner. This is remixed from the STEP files he provided to the Facebook group. In the original design, Sam used a V6…
Since the SB2040 canbus board gets pretty hot it's not the best idea to cover it with a closed pcb cover. This perforated cover improves the temperatures already a lot without any built-in fan. Used this 2000h now without any issues with…
Note: the New KnomiV2 files are available now !! The long awaited D3vil Burner by the D3D team, featuring Knomi support, is here! **Introduction** D3vil Design is proud to release the D3vil Burner toolhead cover for the Creality K1 for…
These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…
[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…
Update: Dual Y motors printing @ 500mm/s Extra motor to compensate for bed wight using de Z driver slot and sending more current, files in folder Dual Y motors upgrade, careful my printer its longer in Y than the normal size, that's how I…
You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files
Introduction The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet , afterburner and variable exhaust nozzle. For this build you'll…
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
Update 14.10.2023: As @adamclerk_238889 commented that the CW2 main_body has been updated in July '23 (the little nose has been shorted a bit - have a look on the pictures). The filament sensor main body is also updated now. It also seems…
Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…
LiteBurner KE Join my discord! https://discord.gg/uYBuFXUmcU I couldn't find anything I liked , so I made my own design. It accommodates 2x 5015 blowers and is designed to be printed without supports. On the right side, there's a slot for…
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
I edited the final release of the Stealthburner to fit the Mosquito Hotejd from my Afterburner. The Assembly and the Heatset inserts are exactly the same as for other Hotends. Edit 30.04.2023: After doing Input Shaping and making…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
My goal was to maintain the eye-catching design while incorporating a better ventilation system. Caution! The model may have some errors or design imperfections. I'm not an expert in 3D modeling. For assembly instructions, refer to the…
This can be printed as two separate prints. You need to enable z-hop (0,6mm is enough). You can enable z-hop only for first several layers (in Super slicer at least). First you print hexagons and on top of that main body. If you z homing…
I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts. I hope it's useful for someone else ;)
BE SURE TO SET CORRECT Z HEIGHT IF USING SEPERATE ENDSTOP. I RECOMMEND JUST USING THE TAP AS THE Z ENDSTOP TO PREVENT INCORRECT Z HEIGHT SETTINGS.…
Hello, we would like to introduce you to our stealthburner conversion mod. With this mod, the standard printhead from the vyper is exchanged for a stealthburner printhead (thanks to the Voron community). compatibility list: - anycubic…
Dragon Incense Burner. Make sure to place incense cone atop something non flammable like a large coin. Half dollar works well. This is a finer/detailed version of an older model I made. Suitable for resin printing as well.
Moved to this Page: https://www.printables.com/model/496044-anycubic-vyper-kobra-stealthburner-mod-bowden-and-
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
Has both the V1 and V2 Knomi. Post your makes for a chance to get featured!
This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
The lightest stealthburner fan cover, decreased the toolhead weight. 9/18 Updated step file Print Settings Printer Brand: VoronDesign Printer: Voron2 250 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15 Filament: Other ABS Red Category:…
Dragon Burner remix for BLTouch/3DTouch. OnShape: https://cad.onshape.com/documents/f649feacb89f1004466cba88 Offsets (from OnShape): X: +32.950 mm Y: -10.718 mm
beacon probe mount designed to work with the stealthburner X carriage. let me know if you have suggestions. thanks printed w/ 23% infill in ABS uses: 2 - 3mm thread inserts 2 - 3x6mm Button head screws ***only tested on a Voron 2.4R2…
Thanks to the amazing work from the Voron team! I added a printhead for the Volcano variant of E3DV6. It is a simple extension of the part cooling ducts from the original Voron Stealthburner E3DV6 printhead. Not the nicest looking mod…
This is my take for EBB36 canbus board holder for Voron Stealthburner. I have taken model from Coxie and pretty much redesigned it. Now this mount is thicker, more rigid and uses M3 screws to clamp cable. Print with standard Voron…
I loved Zachary's model however noticed the new V1.2 of the BTT EBB36 board is larger and the model doesn't fit the board, I recreated a new version in Fusion360 for the new dimensions and it works a treat :)
I liked the HEX design from 3DPMAMSIH and since I plan on using the new BTT KNOMI screen (Also available on Aliexpress ) on my Voron 2.4 SB, this is my take on that with the 2 designs together :) Pre Slice: Highlight objects from file on…
A remix of RepresentativeBlink mount for the Afterburner on an Ender 3 with an MGN12 rail, for StealthBurner also changed Added tie wrap holders to the top for cables Removed nuts that hold the two sections together and replaced them with…
A Duct-Extended v6 Printhead for the Stealthburner The Voron Stealthburner toolhead includes a printhead module that is compatible with a standard v6 hotend. In this mod I attempted to replicate bythorsthunder's mod for the Stealthburner…
Print with standard Voron parameters. Rotate the part so that the top of the mount sits flat on the bed. Use 2 M3x8 screws to attach the mount to the ADXL holes. Use 2 standard M3 heatsets for the BLTouch mount and 2 M3x6 screws to attach…
Hex pattern face for voron mini stealthBurner V0.2 printer original file from voron design page thanks to them 1st printed on two step Gcodes Hex pattern Main body more information how to do it go check Here please .. hope you like it and…
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
This is a modification to the original ender 3 (not v2) to allow for it to mount the Stealthburner fan shroud created by the Voron team. It also comes with a small adapter to be able to mount an LGX Lite as its extruder. With how the…
Update 2024-01-17 - Added the STEP file. Sorry for the delay on this, kept forgetting. I don't have a lot of time to make edits, so feel free to remix - Just make sure you credit the original. Happy tinkering! Update 2023-02-18 - Added…
KNOMI Stealthburner HEX Face CHANGELOG 23.05.2023: Updated with the fix to the hole in the part cooling fan area. Added a “No KNOMI” version that is intended to to be used for those who aren't going to actually use a KNOMI but want's the…
No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and…
Remix of WouterE_ Ender 3 v2 Stealthburner mount. Modified to fit the stock Clockwork 2 files, spaced out to fit the HartK Stealthburner toolhead board, BL-Touch mount has been removed, and a groove has been added to the rear for the…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
I really like the angular design of the v6. I made modifications to the design to enhance the appeal of the accent color on the cowl. Therefore, printing the extruder mount and logo in the accent color should give it a looks good. It…
Mounts on the brace on the rear using 2x M3 heat inserts. Offset: X: 0mm, Y: 27.53mm
MK8 Hotend mount for latest Dragonburner v8 with standard sherpa mini extruder pattern. Assembly: add two “voron” 3ID*5OD*4H heat-inserts slide hotend from the bottom secure with m3*16mm screws into mount Note: this is only mount, you…
UPD: Made one for dragonburner toolhead: link Helps to reduce effects of heat creep issue when using Dragon hotend on your Voron 0.2. My test have shown 30-35% reduction in filament path temperature. There are 2 designs, one uses air…
Voron Afterburner + Orbiter v1.5 + BLTouch for Anycubic Mega Zero & Ender 3 This is designed for use with an MGN12H Linear Rail on the X-axis. I made this compilation with modifications as most of the components I found had issues of some…
No need to explain, all is in the title. Based on Voron Stealthburner for Bambu Lab X1C/X1 Hotend by MrTelip Changelog : Update 12/11/2023 : - Too many versions ! attempt to simplify choice table - Fix airflow for “clone + std V6 nozzle”…
This is a hotend mount for the TZ v2 hotend for Voron Stealth Burner. Based on the Bambu style hotend. Care was taken to ensure good airflow for the heatsink and to direct the exhaust air upward to avoid spillover that can lead to ABS…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
I liked the Afterburner mount for Ender 5 by Gregdog from: https://www.thingiverse.com/thing:4510447 But I couldn't find a Stealthburner mount for the Ender 5 so here it is. Allows mounting the Stealthburner without any modifications.…
MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…
This is a cable gland mount that replaces the Stealthburner chain mount with a facility to attach an M16 or optional M12 cable gland. I've been using this on my Voron Trident with a Huvud CAN BUS setup and has worked really well. You can…
Modified the distance of the mounting holes for the hotend, measured my as 6,9mm, the original project is 6,5mm which is not perfect as it needs a tight fit. Added also a version for heatinserts M3.
Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.
First of all, thanks to "ogland" for sharing. I like this simple design very much, but it is not very suitable for me. I will make several major modifications on this basis. Adapt to Mellow Voron-Kit de extrusora Stealthburner Orbiter,…
Here an cool Mod and Cover for the Stealthburner Toolhead that Supports: LGX LGX Lite CW1 CW2 Designer: https://grabcad.com/sandman-8/models
To fit the BLTouch on the StealthBurner on my BLV MGN Cube I made this simple mount. It attaches to the ADXL mount. Set the following offsets if you use Klipper: [bltouch] … x_offset: -40.9 y_offset: -5.6 … To attach the mount to the…
This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's…
Designed for a CW2 extruder. Other extruders may not work (untested). Required Hardware: 2x M3x12 or/and 2x M2,5x8 2x M3x16 6x Heat Insert You can either secure the hotend with the holes usually meant to screw the fan on (M2,5) or you can…
Check out Poison Apple Prints on Patreon for loads more Disney inspired stl's! including Articulated Mushu and a Mulan inspired zen garden in honor of Chinese New Year! https://www.patreon.com/PoisonApplePrints The chopstick adapter is…
This is a MK8 toolhead for the excellent Voron Stealthburner. VORON StealthBurner (vorondesign.com) I've not printed the GA version, but I printed, mounted, and used the betas successfully. It's designed for 2 additional 20mm M3 BHCS to…
update 11/06/22 Since I realised that the solution I had to make new parts of the clockwork extruder, namely changing the bolting direction to the x-carriage, was now the same as the clockwork 2 method chosen by Voron Design, it now means…
Orbiter 2.0 is a great extruder and I have been using it on my Voron 0.1. Now V0.2 is out and I made a mod for it. There are many E3D Revo heater core failed, mine included. I keep using the Revo Voron heatsink but replaced the heater…
Modified cover to extend further forward to help resolve the wire pinching for the voron tap. Main body for the CW2 needs to be replaced. Based of 3D SB2209, and SB2240 should also work with this modification. The modification uses a 30X7…
Stripe Pattern for the Voron Stelathburner. Can be printed: With a multimaterial setup With Z-Hop enabled as two seperate files With Z-Hop enabled with the pattern gcode put between the faces start gcode and normal code, this is probably…
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
Print with Voron default settings. If you get problems with your threads, use higher fan speed. Don't forget the heat inserts from the original model.
Rear mount to mount the EDDY BTT sensor on the DragonBurner toolhead
AUG 2024 - V0/Printers for Ants: Do not print this!!! I hope to have a V0 compatible mount when finishing my Hex-Zero build. Carto/Beacon sits already very close to the bed, I didn't like how the stock probe mount had the risk of screws…
BTT EBB36 Umbilical Strain Relief for Stealthburner Works both as a mount for the BTT EBB36 on the Steathburner CW2 but also has strain relief. Mix of two other makers models. Requires two m3 heat inserts 3 versions - 58mm, 65mm and 70mm…
.ased on the official Voron 0.2 Bowden Toolhead stl. Now updated for 0.2r1 Needs 2 brass heat set inserts, the back screw needs to be replaced with a 20mm length one.
I modified the new mini stealth burner to work with the orbiter 2.0 as well as all the released tool head mounts to work with the changes I made. One of the heat set inserts is really close to the wall of the hotend adapter so i added a…
this can be used on the Trident This Requires 2 M3 heat inserts in the Key to work properly. 3 M2 heat inserts for the pcb Klicky version This a Mount for the Voron Dragon Burner on a MGN12H. Can be used on any printer with the belts on…
Edit 18/09/2023 : It looks Voron Team officially support Bambulab hotend for V0.2 . You can download it on the Voron design official repo This is a mount for Bambulab TH on Voron 0.2 miniStealthburner But Why ?? Bambulab toolhead is…
Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…
//credits First of all, all credits go to the original designers of the plate and the wonderfull team at VORON , I reserve absolutely no rights, this is a a half-assed attempt at best anyway. Credits links: tjeschweizer 's design (is a…
Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…
Knomi V2 Display Mount for the Voron Stealthburner This is a revised design of my Kenny Mod 2 to accept the Knomi V2 Display. Additional enhancements from the previous iteration: Increased side venting by 1mm to allow greater air flow to…
Remix files for the Voron Stealthburner providing a mounting point for the E3D PZ Board for the E3D Revo PZ Probe Voron Upgrade.
This fits the popular ADXL345 module that measures approximately 20.2mm x 15.5mm with eight pins along one long edge and two M3 screw holes on the opposite edge. It should be a simple print in ABS, ASA, PC Blend, nylon CF, or really…
Hi guys, This design fits the stock Voron StealthBurner. The only part that i had to mod is the cable cover as it as intersecting with the mounting plate. The design has the bl-touch integrated into the mounting plate this idea came from…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Hello, I had trouble reliably printing the Voron Stealthburner SB2040 cover, the pilars between hexes kept on breaking, remixed to have more space between hexagons, a little less venting but printed reliably. I printed mine in ASA at 250…
A simple mount for umbilical on the Stealthburner with CW2 and Mellow SB2040
I combined the FatBurner cover with the left and right base part to a single model by extending the bases 2 mm to the cover so that they overlap. I needed that because the extruder motor on my KE did not feature the mounting holes to…
Parts should fit perfectly if printed with recommended Voron settings. For those who want to put in on Voron SW, you may need to edit or sand a bit of the carriage parts(to which you attach mgn12) as it may interfere with the stepper…
As there were no available mods to fit sb2040 with lgx lite I modified the standard stealthburner body and LGX Lite mount to fit together. Inspired by standard Stealthburner https://github.com/VoronDesign/Voron-Stealthburner and lgx lite…
