Counting matching models…
Overview I designed this as part of a budget F1 in Schools track and timing system back in 2015. The official Denford system is of high quality but very expensive. Beyond the budget for most schools. The original system is seen here…
This model is compatible with the lego system.
This is a screwable cap for the SodaStream C02 Cylinder
This wall hanger uses 3 screws to secure the mount to the wall. It will hold the Dewalt tire inflator with or without a battery inserted.
Simple aquarium CO2 ladder which will print well without supports when laying horizontal. This remix uses 5mm OD airline tubing to deliver CO2 to the base of the ladder. Once the bubble is on the track it will travel upward and shrink in…
2024/01/12 - Update. The resin printed part became brittle and unfortunately broke after almost a year of use. Perhaps a ‘thicker’ version or different resin would hold up longer. 2023/01/28 Replacement brackets to hold heater instrument…
This is a part that commonly breaks on these soda carbonators so I designed a robust replacement. This nut features a cutout which allows it to slip over the small ferrule on the C02 delivery tube without the need for it to be…
Originally designed as a stand for another creators targets, i also created some of my own in the end. Here is the link to the other targets so you can download them from there, thanks to @quietmesh: The stand i printed at standard…
Designed this part to hang my new DEWALT DCC020I inflator on the side of my Craftsman toolbox. I also created a variety that will screw into the wall using four countersunk holes. I'd print using PETG if you're using out in a garage or…
There are two files, one for the actual TPU seal and the other for converting an 11/32 ¼" hex socket into a removal tool. The printed insert is just a guide - it is very difficult to do without it. FreeCAD files are included so you can…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Servo mount for my DIY Linear Actuator https://www.printables.com/model/961759-linear-actuator-for-motion-platforms-sim-racing Use DIN 912 M6x40 Screws and LF D35L50 coupler (19x10mm)
This model is compatible with the lego system.
This is an adapter for using old Dyson vacuum cleaner heads (~32mm outer diameter) with a Hyundai VC020B. I printed it out of PETG and it holds together and fits in relatively well. You may want to trim some extra material or wrap the…
I made a holder for my 6-port USB charger RAVpower RP-PC029. The holder can be mounted with double-sided tape or screws, un horizontal or vertical position. Prints without supports, if oriented with the opening up. I'm not gonna ask for a…
These two adapters are for the intake and exhaust sides of a Therm-a-Rest TwinLock valve set. They adapt to the low pressure, high volume hose of a Dewalt DCC020IB inflator. I would recommend both be printed in TPU, especially the female…
Designed for Siegen SG-3049C02 hair dryer, but possibly compatible with other brands and models of similar dimensions (see photos). Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro Rafts: No Supports: Yes Resolution:…
Space-saving and material-saving. Requires only 100 g of filament. The stand is 5 cm high. In my print (see photos) it is only 3.6 cm high because I ran out of filament. But even with a height of 3.6 cm, the stand works very well. Wall…
The modified rear cap and the original chamber do need to be printed with a higher in-fill and walls because of the high pressure from c02. These stls use the same parts as the original. The only thing changed is the hole placement for…
This is a laser cut pass-through cover fitting for OMTech 60x90cm 8B69 The laser has 2 openings for fitting large pieces, which is quite dangerous. With this cover, you can close the machine and make it save. The cover is mounted with…
This model allows you to use the existing hardware that comes with the C02 mic. Just use some double sided tape to stick it to your surface of choice. Don't forget to rough up the surface a bit for better adhesion.
I wanted a good readable analog clock in my car. I found the Braun BC02XB as perfect in form and function, and decided to make a mount, that i fixed with doubleside tape 3M VHB on the dashboard. The clock can easily be removed for…
Hundai VC020 replacement part
Description This is an enclosure for the Axxsolder soldering iron (v3.5.2) which works with the Geeboon SDC02 stand. In order to minimise the amount of clutter and cables, the enclosure integrates not only the Axxsolder electronics but…
IKEA Skådis Holder for Philips GC026/80 | T Nut System This custom-designed holder is specifically made for the Philips GC026/80 Lint Remover , providing a perfect fit for securely mounting the device on an IKEA Skådis pegboard. The…
Print with standard settings, .02 Structural, no supports needed. I printed mine in matte black PLA.
ABS as all my models. you need Magnetic 10mm connectors Got mine from Ali 2-10 stücke Mini 10mm Durchmesser Magnetic Charging Stecker Pogo Pin Männlich Weiblich 3A DC Stecker LED Smart elektronische Power-ladebuchse 8 M3 Heatinserts the…
My first ever 3D model for printing. Overhauled to provide a stop when inserting the USB cords. I always wanted to fit the power brick for my Raspberry Pi cluster under the wooden rack I build myself. Thanks to the Prusa Mini+ I know can…
You can download the STL here: https://www.thingiverse.com/thing:7198088 This mount is designed to fit underneath a bottle cage, allowing you to carry a C02 cartridge and plug kit, or two C02 cartridges if you prefer. You could also use…
My RECI-brand C02 LASER tube is designed to run at 28 mA. The manufacturer says to keep it at 26 mA if you would like the 10,000 hour life. With my cutter, I could not use 100% power and stay within these limits. In fact, my power has to…
This is a replacement for the vacuum release latch of the Hundai VC020 vacuum cleaner.
Scaled the PC028 1810 cap up until it fits the soft flask bottle neck, then combined with the pet bottle part to form an adapter to which standard sports flip tops caps or push/pull tops could be added. Use case is for sports enegy gel…
This is a single colour print, I was just using up blue filament! Printed at 5% infill with no supports. It has notches to hold the lid in place. The lid is a loose friction fit - this is designed for storage rather than transport.
Conversion pieces to provide C02 style trapping using a BG Counter trap. Very much a work in progress, and designed to allow easy updates to fan/funnel types. Suggestions for improvement are always welcome. Threaded rod #8 size and…
Zapadaka pro zafixovani tycoveho vysavace ve slozenem stavu
The base of my dental curing light broke so I made a replacement one. This is a replacement battery holder to fit the Premium Plus C02-D dental curing light. To use, remove the old battery holder by slipping out the old battery on the…
Use a filament that will be safe around engine bay temps. I used CF Nylon 12. Seems to be holding up well. Use Tpu for the gasket. 100% infill for both parts.
Screw-mounted wall holder for replacement filters for 18V Makita XLC02 vacuum.
The supporting stand for the wireless charger from Xiaomi - which enables the phone usage while charging - better angle
For children competing in the Formula Ethara competition you will need this to hold the C02 canister in the F1 car.
Replacement for the Spanninga CC02 cable connector, the small one-piece plug that clamps the power wires into the back of Axendo 40, 40+ and 100 headlights (dynamo and e-bike XE versions). The original part is not sold separately anywhere…
Bigger and easier buttons with extending "Stop-button" for easier E-stop. Fits the MC02 motor protection from amazon
Keep your kegerator organized with these redesigned ball lock covers, perfect for managing the all your keezer co2 lines! Printed in PTEG at 15% Infill with support on build plate only Make your kegerator setup as smooth as your pour.…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Description This is an enclosure for the Axxsolder soldering iron (v3.5.2) which works with the Geeboon SDC02 stand. In order to minimise the amount of clutter and cables, the enclosure integrates not only the Axxsolder electronics but…
Scaled the PC028 1810 cap up until it fits the soft flask bottle neck, then combined with the pet bottle part to form an adapter to which standard sports flip tops caps or push/pull tops could be added. Use case is for sports enegy gel…
Made a compact DC power input enclosure designed around the DC022B (5.5x2.1mm) and KCD1 rocker Switch. I created the box to add an inline power toggle for a 24V LED workbench light. Before you print: The rocker switch cutout is modeled…
This wall hanger uses 3 screws to secure the mount to the wall. It will hold the Dewalt tire inflator with or without a battery inserted.
Keep your kegerator organized with these redesigned ball lock covers, perfect for managing the all your keezer co2 lines! Printed in PTEG at 15% Infill with support on build plate only Make your kegerator setup as smooth as your pour.…
I recommend printing with PETG for durability.
Made a compact DC power input enclosure designed around the DC022B (5.5x2.1mm) and KCD1 rocker Switch. I created the box to add an inline power toggle for a 24V LED workbench light. Before you print: The rocker switch cutout is modeled…
I quickly whipped up this base for a soda stream fizzi model. The goal was to have an extension on the bottom that allowed a C02 hose to connect to a larger tank. I could have just left the back off or drilled a hole in it, but what is…
The K40 C02 laser has a very lackluster ability to laser material thicker than ¼". I designed this to be able to quickly adjust the bed between setups using 4 timing pulleys attached to threaded rods and a single bolt. From the top you…
This is a sliding privacy cover for Avaya HC020 cameras. I have been using a piece of bent cardboard as a privacy cover for several years and determined that was shameful when I had a copy of Fusion360 and a 3D Printer. Very simple print,…
Update to my sliding privacy cover for Avaya HC020 cameras. This one has a notch in the back that hits against the USB cable in the back to limits travel if you wanted a hard stop for the sliding cover.
