Counting matching models…
This is a hand-measured 3D model of the Apevia 500W ITX-style power supply, created for rough design and layout purposes. Measurements were taken from a single unit and may vary slightly between units or wattage variants. Please verify…
This is a button cover for the Sony WF-C500 earbuds. The cover fits over the existing button and prevents accidental presses, while still allowing it to be pressed with your finger. I used small strips of 3M double face clear tape to hold…
Ce modèle est fait pour accrocher une caméra dans un angle de bâtiment. Pour accrocher le support de la caméra, j'ai utilisé des inserts M5 x 10 x 7. Les trous de fixation sont faits pour des vis M6.
Ich habe eine Einfüllhilfe fur den Wassertank für eine Thetford C500 entworfen. Die Einfüllhilfe soll verhindern, dass das Wasser im Einfüllstutzen stehen bleibt. Wenn euch die Datei gefällt, dann lasst mir bitte ein Like da.
Staffa a 90° per installazione a muro della Videocamera Tapo C500
Corner mount for Tapo cameras - C520WS (likely for C510W C500 C530WS too). Enough space within to hide the cables.
This is Version 1 of a removable cupholder that fits in the center console of a Lexus LC500. It is sized to fit even with the center console lid shut. Feedback is welcome on how to improve the design. Disclaimer & Limitation of Liability…
Geometrical model of Sony WF-C500 headphones case for using in 3D modelling. STL and Fusion360 files.
The Shimano FH-TC500 is infamously known to have/develop lateral play in the rear hub, even straight from the factory. The source of the lateral play is a tiny gap between the freehub and the bushing. This gap allows the freehub to slide…
Hello, a quick remix for my Decathlon RC500 (flat stem). Print in PETG, 0.2 is fine, but you can try 0.16.
Simple holder to mount the Realsimgear GFC500 under a Honeycomb Bravo Throttle with double-sided tape
This is a Wall mount for Xiaomi Smart Camera C500 Pro (possibly can be used on another xiaomi cameras - it's using adapter) What do you need: 2x M3 wood screw 2x M3x10 screw (i used (DIN7991) 2x M3 HexNut
Print with normal snug supports, magnets holes on top, as supplied in the files. for the magnets, you'll need: • 4* disc magnets, 20mm * 5mm, with 5mm holes • 4* M4 10mm countersunk bolt screws (a bit more than 10mm can fit as the Tapo…
A box to keep the cables out of sight and that can be user as a base for the camera. I only printed it em PLA to test fit and it was ok. Will post photos of the aplication soon.
A chronobox for the AC5000 Acetech chronograph and a box to mount the holder to and shoot into. HARDWARE: 7x m4 bolt 3x m4 nut I put 1 cm rubber mat and some acoustic foam on the inside of the box to protect the walls and slow the bb down.
This is a adapter for the Bosch GTS 10XC and the Scheppach DC 500 sunction system. Printed in PLA
Inspired only by the fact that the delivery did not happen without damage to the shipment. The original has completely straight blades and just blows air around and doesn't cool the engine too much. This version is quick without…
Feet for the Leopold FC Keyboard Line, should fit the FC 500 series
Small snap-in mount remixed from this tripod adapter (by GioSunrider ) for the Logitech C500 and the original Flexi-Arm mount (by mkoistinen ). The mount replaces the original stand and therefore you will lose tilt and sway functionality,…
This is a remix of Ender 3 Webcam mount for Logitech C300/C500/C600 or other similar. I use C500. I made the height lower to be at about the height of the bed and a bit longer. Also as a joint I use only M5 screw, seems enough. The camera…
This is an end cap for ultralite UEC 500 conservatory roof beams. very hard to find in stock. print nicely in 45 mins and fit great Photos of installed cap coming soon I recommend ABS/ASA or something that can withstand UV and rain
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
This sound suppressor is for Multivac C500 chamber machine. It suppresses the high pitched sound coming from the machine, making the environment around the machine more suitable for work. The replica of the original part was adapted for…
Synology TC500 Flat Mount for use with zip ties as temporary or permanent attachment.
Replacement bottom cover part for Sony WF C500 made in fusion. STL file. Printed mine in PLA.
This is a Brother VC500W Stand and Tub. There is a longer and a smaller versiion of the tub. You need: 2 3x10mm magnets for the tub 2 3x12mm magnets for the stand For the bottom you need TPU Feet. They need to be glued in the holes on the…
I made this part to convert my headphones to USB-C charging quickly and without voiding the warranty. It is meant to be mounted with hot glue or double sided tape. Without this holder the Micro-USB to USB-C adapter was causing a lot of…
My VC500W printer came in a kit including one of each label width and a cleaning cartridge. They've been lying on the desk behind the printer since then. Simple gridfinity bin to store them.
A press fit cover for the Soehnle AC500 Air Purifier. Blocks the light and buttons of the device. Ideal for keeping cat paws away from the buttons.
the little nubs on the side should be the correct size, but at least on my FDM printer I still had to cut away a bit with a knife. If you print them on a resin printer they would likely fit, but I can't test that. ^^
These trays allow ice cubes to be used for cooling the food in a Cat Mate C500 automatic pet feeder. Be sure to use cubes that aren't too tall (22mm or so). In my testing there was no leaking, but depending on your printer and settings…
I had one of these webcams laying around and didn't know what to do with it, so I made this simple holder so I can put it on top of my 3d printer and moniter it remotely using a raspberry pi.
This block-off plate is specifically engineered for the BMW ATC400 transfer case (commonly found in the BMW X3 E83 and X5 E53). It serves as a durable seal when the original transfer case actuator motor is relocated or moved to emulate…
This axle cap is modeled off the right side axle cap, with clearance for the centerlock rotor mount. The fit is snug to the bearings, and shouldn't have any drag on the rotor mount. Printed in PETG, 0.2mm Layer Height w/ 6 perimeters.…
I made this mounting block for the Synology TC500 camera as an adapter between a standard articulating arm mount and the manufacturer base for the camera. This model is, for all intents and purposes, a slightly beveled cylinder, printed…
Матеріал/material PLA/PETG Сопло/nozle 0.4 mm Висота шару/high layer 0.2 mm Стінок/wall 3 Навушники підходять на будь-яку кулю діаметром ±78мм Вуха і роги кріпляться на різьби, тому можна прикрутити щось своє😈 Характеристики різьб вказані…
Earbuds fit perfectly in, no supports required, printed on ankermake m5 with matte orange pla filament.
This axle cap is modeled off the right side axle cap, with clearance for the centerlock rotor mount. The fit is snug to the bearings, and shouldn't have any drag on the rotor mount. Printed in PETG, 0.2mm Layer Height w/ 6 perimeters.…
Ich habe eine Einfüllhilfe fur den Wassertank für eine Thetford C500 entworfen. Die Einfüllhilfe soll verhindern, dass das Wasser im Einfüllstutzen stehen bleibt. Wenn euch die Datei gefällt, dann lasst mir bitte ein Like da.
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
Broke the slider on my front door automatic closer, so I made a replacement. I printed this in PA-CF.
Our original Shark vacuum died and we replaced it, but new models don't come with this little adapter. Its great for the couch and stairs. The vacuum's suction causes little rollers in the tool to spin up and help remove thick pet hair…
Simple roof for the Tapo camera, integrated cable holder. I didn't quite trust the tiny screws that came in the box. Print Settings Material: PETG Perimeters: 4 Texture: Fuzzy Skin (looks great and hides layer lines)
Replacement cord wrap for a Dewalt DC500 vacuum Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100% Category: Replacement Parts
This is a simple cover to help hide the color of your elf bar/bc 5000. It covers the majority of the device but the top is still exposed. I recommend printing just a piece of the model first (for example, lower some of the model below the…
