Counting matching models…
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print. The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports…
I designed a new bulb for the base in https://www.printables.com/model/678099-christmas-tea-light-bulb that is modeled after a C9 outdoor Christmas light. The original has a pointed tip that does not print well in vase mode. As long as…
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
Have a spare Logitech C920 camera and want a printer camera for your Prusawire? This 3-part print replaces one of the bearing clips with a camera mount. This is compatible with Prusawire Beta 1 and Release 1, but you should reprint the…
Rear speaker installation set for 1" tweeter and 6,5" woofer for volvo rear door. On the pictures are 1st gen of the model, but on thje second gen of the desing is the cable attachment holes and less material consumption. Woofer…
EDIT: New updated version here. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I printed this using Elegoo PLA, using the 0.20mm Standard 0.4 nozzle profile…
Just wierd case. Printed with petg. It is necessary to remove the audio jack module in order to route the wires to the battery.
This is a replacement shaft for the selector knobs on the DeLonghi La Specialista Arte (EC915x / EC9155) espresso machine. (Part #AS00006169) The original factory shaft is a common failure point and often snaps internally, making the…
Created this barcode scanner holder for the C750 but also works for the C740 / C990. Prints without support on the side.
Motivation I wanted a nice looking and hidden camera mount for my C920 . So I made my own. Parts and BOM You'll need the camera and 2x m3 8mm or (2x 10mm?) BHCS screws and 2x m3 T-nuts. Printing Print as provided. Please use support for…
I made it for the volvo xc90 gen 2 (this one is a 2016), but it might fit other volvo center consoles. Try it out and let me know in the comments!
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
Print Settings & Hardware Nozzle: 0.4 mm Material: PETG recommended for durability. Hardware Required: 2x M5*25 screw and nut . Supports The model is designed to be mostly support-free. However, for the best results, I recommend adding a…
Wall mount for the AA and AAA Powerex MH-C9000 Battery Charger. Perfect fit when I print it. If too snug for you, try increasing size by 1% Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
The design is so simple - no explanation needed on how to print this I guess. No moving parts.
This CAMLOCK adapter can be used to connect a MacAllister MAC900PB belt sander. Adapter slides onto the dust port. To be used with the CAMLOCK connector from @PeterH. I designed this with FreeCAD using @PeterH's description of the CAMLOCK…
I printed this with full walls, fits perfectly and uses the screws from the body of the logitech to fix mount. Designed 2 years ago and still holding perfectly.
Handy case for 1.28 round display (GC9A01 driver), 240x240. There is also hole for cables on side or you can use display pins at the bottom. Easy print, no supports. BambuLab X1C 0.2 20 infill PLA+ no supports
DO NOT TRY TO PRINT THIS WITH PLA SINCE IT WILL MELT!! If you have ABS at your disposal: use that. Otherwise PETG will do for prints below 80°C bed temp. This remix adjusts the form to fit the angular Y-Carriage on the MK3S, adjusts…
Magwell fits B&T SPC9, APC9, GHM9 lowers which takes B&T magazines. Every element is printed in the strongest orientation to wait stand the forces. Model needs to flex do not go crazy with infill and parameters. Shape helps to bump lock…
Raymarine Trackpad and Rottary UniController for C90w Using the excellent work from Gero Mat added the rottary button.
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
If you ever have a need to replace a broken infotainment button on this specific car, then you are @ right place! This button takes 20 minutes to print (I used PLA) and saves a lot of money because you can't buy one without purchasing the…
Wife wanted the Govee Permanent Holiday Lights to look like old school C9 bulb strings, so I added a C9 holiday light bulb shaped diffuser to the mounting bracket, positioned so it gets fully illuminated by the bulb but does not disrupt…
this set got the parts to make a FGC-9 styled MKI and MKII butt stock. materials needed for MKI 1x M4 30mm long for MKII 2x M3 16mm bolts for butt pad 1x M4 30mm long
You can use it for a Logitech C920s webcam. I added a little border in case you want to place other stuff on the arm / shelf. If you require additional grip, apply a strip of thin foam rubber tape to the inside. To attach it, begin with…
Printed in PETG Overture Stary Blue. I used supports but probably didn't need to.
This is a wider, dual mounting solution that centralises the position of the camera for better top down viewing of your printer.
Low Poly FGC9 13 for PYRO The Whiner !!!
This is a 2-piece mount for a Logitech C920 or C930 webcam, allowing it to mount to either 2020 or 3030 extrusion at the top of your printer. To use this mount, you will need to disassemble your webcam until the point where you remove the…
A generic bracket that connects to where a Celestron finder scope would normally connect on a C11. I believe the C9.25 also uses the same base. Out a M3x25 nylon flat-head screw through the knob and a nut in the recess of the knob, then a…
Accidentally broke the original grey stand while moving my router. Quickly modelled this one up and it works great. My router is the TP-Link Archer C9 AC1900. The original stand is one piece that wraps around the whole thing. This design…
No axis disassembly is required. The arm fits nicely on the end of X-axis. UPDATE V2: Vertical version! ( I need to improve light now 😅) Since my printer is sideways in my closet, the v1 was a bit impractical and I kept bumping into it.…
As the original model author, I was not satisfied with the aesthetics of other mounts. Her model really fits nicely with the curves of the camera, but in my case, I needed the mount from the bottom and not from the back. Print like the…
My workplace's printer came to us faulty. the original gear (translucent white) came to us with broken teeth, and i could not get the xerox customer support to bring me a new one, so i just made one, using a 12 tooth gear that already…
This is a Logitech C920 Webcam Mount for a Prusa XL printer. The mount is primarily designed to have the camera in the right-rear corner of the printer since that's the clearest view of the printheads while printing. Since the mount uses…
The Logitech C920 Case 2020 Extrusion worked very well for my C930e. I was afraid to let unprotected camera lens protrude like that, so I designed a simple pseudo-pyramid that protects them - now a stray cable won't catch it, but rather…
Remixed the original to accommodate a 90mm LED ring light, as well as allow me to still use the privacy shutter I already had installed on my C920. Created some diffusers of varying thicknesses to make it less blinding, printed in…
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
This is a holder for a partly dissasembled Logitech C910 webcam, designed to fit the RATRIG VCORE 3.1 enclosed version
This is a replacement part of Philips FC9919 vaccuum cleaner. The plastic part of the tube has broken so I designed this part. It's more simple and useful than the original part. There is a simple mechanism that allows you to lock the…
A plastic part upgrade for metal tube of Philips FC9919 vacuum cleaner to avoid scratches on the ground. To improve durability, print it horizontally with supports. Print Settings Printer Brand: TEVO Printer: Tarantula **Rafts:** No…
This is my remix of RedKB's front mount for the C920. I had previously been using the Pi camera with Sneaks articulating mount and really liked it. When I upgraded to the C920 I didn't like the big bulky mount so I used Nat's mount to…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
Mounts onto any of the threaded holes in the upper frame using M3 hardware. Follow the C920 disassembly guide here . You will also need to print this mount , originally for Voron. Not posting it as a file here to avoid any confusion as to…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
Light up your holiday season with these 3D-printed Christmas Light Bulb Ornaments , designed to resemble the classic C9 bulbs of yesteryear! Available in vibrant yellow, blue, green, and red, these ornaments bring nostalgic charm to your…
Internal Waistband (IWB) Holster for Ruger LC9 and LC9s Designed specifically for Ruger LC9 and LC9s pistols, this IWB holster offers secure and discreet carry. The fixed design ensures consistent placement and draw. It provides a snug…
This is a mount for the Logitech C920 HD Pro webcam that allows you to mount it to a wall. The camera can be easily rotated. Aside from the screws needed to fix it to a wall no other hardware is needed. The holes for the screws are 5mm…
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print. The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports…
Display spacer for the Bafang C961 Display to raise the display when the head stem is in the way.
Designed a corner mount bracket to fit the ¼"-20 tripod mount screw for a Logitech C920 (should fit pretty much ANY camera with a normal tripod mount screw). Has attachments for the bottom of the extrusion or the inside. Print with…
Gave the nulaxy c900 webcam a new and smaller shell so it actually fits inside my printer.
Easy DE-CALC nut replacement for a Philips Elite GC9625 Steam Generator Print with supports - Rotate model upside-down to print
I designed a new bulb for the base in https://www.printables.com/model/678099-christmas-tea-light-bulb that is modeled after a C9 outdoor Christmas light. The original has a pointed tip that does not print well in vase mode. As long as…
Decided to make a clip to perfectly hold my Twinkly C9 Christmas Lights. I screw these onto thin strips of wood at regular intervals so I can easily attach them to the house each season. Before I was using crappy store bought clips, but…
UPDATE 2024-1222 Bottom of the bulb was too small. Updated (printing test now) updated the cross member to fit new size and to a better design. Hole in the clip are too small shrank them to 3mm. Half inch #8 would likely be better (¾…
This is a c9 bulb led tea light holder. It is approximately 7.25 inches tall overall. It's printed in three pieces. The bulb should be printed standing up in vase mode. The clip should be printed laying on its side. The base should be…
This is my first project using Autodesk Fusion 360 (my new 3D printer Prusa MK4S too). The design uses 1.75mm filament for the hinges. I've used parameters in Fusion 360 to ensure proper fit, including: Spacing tolerance Chamfers…
The mount is fixed to the z motor mount which allows the nozzle to be seen regardless of the height of the printed model.
nulaxy c900 webcam reshell using zip tie and tiltable base
Minimalist Gridfinity bases for the smaller drawers on the Husky 46 in. W x 18 in. D 9-Drawer Mobile Workbench Cabinet (H46X18MWC9). I found similar files for the Lowes versions and different sizes for various other Husky boxes, but none…
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
Spigot ring to fit P2 Volvo cars (V70, S60, XC70) with 65.1mm hub diameter and adapt to 67.1mm hub diameter. Used for over a year with no problems on a 2004 Volvo V70 with XC90 Atlantis alloy wheels (printed in PLA, PETG should fair even…
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
Simple corner mount for Logitech C920 webcam. Printed with Inland PETG+ at .20mm layer height.
This is a protective cover for the front of an Icom IC9700 or an Icom IC7300 Amateur Radio Transceiver. The front face plates of both of these Icom radios are identical and so for those of us lucky enought to own both, two print runs will…
This mount is meant to be glued or attached with an elastic rubber band. It allows screwing a lens to the camera. This is in particular useful to mount a fish-eye lens to have a bigger field of view for 3d-printer cameras. Here is the…
The Logitech C905 camera has several advantages for use on a Neptune 4. It is available as used at very low cost on sites like eBay (I've seen it for $8 shipped to within USA). It is very narrow in width so that it doesn't interfere with…
Webcam block mount meant to use 2x M3x10mm screws and blind t-nuts in 2020 extrusion with Logitech C920 webcam removed from enclosure to just raw PCB. Has pocket / space for a small heatsink to be used on the back of the main processor…
2025-10-16 If you don't have (or like or use) heatset inserts, there is a version that will take an M3 x 10mm screw that does NOT need the insert. ------------------------------------ This is a camera mount for the Anycubic Kobra 3. I…
This is a mount based off of the following Thingiverse models: HeyVye's modular mounting system This c920 bracket This 2020/3030 extrusion bracket You will need to disassemble your c920. Perform steps 1-5 of the iFixIt C920 teardown ,…
i needed a web cam mount for my Logitech C925-E web cam and i couldn't find one i liked so i basically i put two designs i found together. Print settings: 0.4 nozzle Layer height: 0.16 Walls: no less than 5 or the top edge of the clip…
A big thumbscrew is better for my old fingers. I remixed the C930e horizontal mount remix to work with my C920s and provide clearance for a thumbscrew from yet another camera mount .
Dummy model of TFT display: GC9A01, exact manufacter or part number is unknow. Tinkercad model I bought it from Alexpress
I wanted to mount my old Logitech C920 in my new Core One. I remixed together a corner mount for the Core One and the really excellently-modeled C930-to-gopro adapter by ochm to build this mount. You'll need to take apart your camera a…
I printed at 40% infill for strength. 20 minute print time. No support needed. 0.2mm layer height.
It's 3 parts. You'll need M3 and M4 threaded inserts and screws.
I mounted the mount upside down compared to the original design, so wanted the cam mounted further out from the bed, and wanted the mounting holes for the gantry to be part of the print rather than requiring drilling. This isn't really a…
I made an extended sleeve for the Canik MC9 for the 18/20 rd magazine so much more comfortable to handle and it is FREE feel free to remix but if you do give me credit and post it for FREE this a firearm attachment, print at your own risk…
I needed a longer arm for this mount, so I simply doubled the length in Tinkered
This is to mount C920 in better angle if you come from something like this: https://www.prusaprinters.org/prints/38920-c920-camera-mount-mk2-mk3smmu2 and don't have the bottom clip :D Remix of two models here: For Arm:…
I was looking for a way to install a cheap 1080p webcam inside my Core ONE in the top corner. I found a cheap EMEET 960 camera on amazon that was mostly plastic. Taking it apart you can see the board is quite small. This mount is designed…
This is a detailed 3D model of the Volvo XC90 Ultra , designed to match the exact configuration I’d love to buy for my father one day. What started as a simple idea when I was bored turned into a small yet meaningful project. This model…
