Counting matching models…
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
Model Vespa 150 Super (1965) It's not exactly scale model but is optimised for easy print with no supports. It is better to glue the pins, but it is not necessary. Printer setup: Nozzle diameter 0,4 Layer height 0.20mm 10-20% infill No…
Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…
Coffee capsule holder for the Nescafe Dolce Gusto capsules
Simple portafilter stand for the Ninja Care Luxe. Can be used to stabilize the portafilter during tamping, or just as a nice place to rest it when not in use.
Just a small keychain with a caffeine molecule. I printed the base of mine in wood PLA and the molecule in black PLA, so it looks almost exactly like the render.
I wanted to think outside the wooden Doll House Box and designed and created this Mini Scaffolding for you to build. it is fully modular and can be extended as much as you want. This Mini Scaffolding can also be used as desk toy/furniture…
Caffee EKG vonal rajz. 2 falyta Ha tetszik nézz szét oldalamon!
This is my holder for Nescafe Dolce Gustro capsules. I glued it (double-side tape) on side of fridge for saving space in kitchen. Double side tape is strong enough for weight of capsules. I made it from two pieces (Prusa MK3 working space…
Nescafé Dolce Gusto adaptér na odvápnění. Pokud ztratíte originální adaptér na odvápňovávání svého kávoru, tak si můžete vytisknout tento. Nescafé Dolce Gusto descaling adapter. If you lose the original descaling adapter for your coffee…
You will need to print all files prefixed "frame". It is indicated in the name how many of each you need. There are three ways of printing the nodes - and two separate set of node files. First Option: If you have a multi-material printer,…
This tamper guide makes your ground coffee flat, so earth can stay round! It is a really tight fit on the tamper, so no screws needed. Print it on PLA or PETG. No support needed! (The inside of the model ends in a cone, so you can print…
A miniature set of scaffolding structure. It's mainly adapted from a commercial product . Dimensions of a singular set in default size are about 82 x 97 x 58.4 mm (roughly in 1:2x scale). It could be extended in vertical and horizontal…
Remix of https://www.thingiverse.com/thing:2864058 to fit on Prusa Mini and Prusa MK3s. Holds 24 capsule. No supports needed.
Willkommen im Schlumpf-Café! Diese Figur zeigt den Café-Schlumpf mit Tasse in der Hand und einem Schild mit "CAFÉ" – bereit, die Gäste zu begrüßen. Ideal für Dioramen mit Alltagsszenen oder als originelles Sammlerstück. Der Druck ist…
A remodeled version of bonzai000's original G-Wagon. Updated a few features for better details when printing at larger scale. features updated; Wheels/tires, Mirrors, rear bumper with added hitch, spare tire and, removed side skirts.…
a cafe sign As with all of my 2D artwork and signs, using a small blob of removable/reusable Sticky Tack will help to keep this stuck to your table/desk/shelf.
Singlepiece verison of my A6M2 Zero wallart. Fits on MK3/MK4 bed, Mini not tested but should be printable.
This is my little staffold to hold any picture like stuff it's print in place and comes in two tollerances (0.1 and 0.2) i would love to see your prints ^^ i allways use 3mf as they are the better filetype - if you need the stl let me…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 15% Material: PLA Brand: Prusa Color: Mystic Brown printed on Artillery Sidewinder X1
I designed this leveler to achieve consistent results. The leveler is able to distribute the ground coffee evenly in the sieve without compressing it. Simply turn the leveler clockwise. If you put in too much coffee inside the sieve, you…
you can print the design in all possible settings, if you want to use it to really mount it on the motorcycle you will have to print it more firmly.
I generated this model with https://pubchem.ncbi.nlm.nih.gov/ and https://3d.nih.gov/ and printed it with my mk3s+ and mmu3. I'd recommend to use different colors for the molecules, I also uploaded the painted project file. Some settings…
A caffeine molecule on a coaster 0.2 mm layer height 0 top layers your infill pattern of choice Change filament to a contrasting colour at the beginning of layer 5
A little piece to move the pressure gauge to the head of your Robot. No gauge disassembly needed! The attached STL is for a 8 mm screw with 12 mm head, although the FreeCAD source would allow easy modifications. Some Robots are known to…
All the Dolce Gusto capsule trays I found online have a different shape than mine (Piccolo XS), so I created a faithful copy of the actual tray. The file contains two versions, one has a rim at the top, like the original Dolce Gusto…
This is a remix from https://www.thingiverse.com/thing:3445630/files I wanted a capsule holder printable with prusa mk3 :)
I wanted to fix an issue I had when trying to use the Bookoo WDT Tool with the Ninja Cafe Luxe portafilter due to its unique dimensions. This project is intended to make a version of the funnel and portafilter holder that will work with…
Supports for hot wheels track. You can use a 1/4 dowel in the center to support the track in the middle
Holder for cafissimo capsules. Single-slot and double-slot. PLA transparent, 210/60, 0,3mm, 2 shells, support
better Quality version of one i saw on thingiverse.
Hier servieren Schlümpfe mit Stil! Diese detailreiche 3D-Druckszene zeigt zwei Schlümpfe in einem liebevoll gestalteten Café-Moment: Einer sitzt entspannt mit verschränkten Armen, während der andere ihm mit einem Lächeln eine dampfende…
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Cafetera para hacer cocina en miniatura.
A set of modular scaffolding to create towers and bridges connecting them for DnD and other TTRPGs. They are made to use as little space as possible for storage, while still functioning well. Sizing is for a 25 mm/1 inch grid. The sizes…
Another Funny Sign - “Decaf Coffee? You mean brown sadness water? ” The one in the photo is printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign easily…
Fermeture sachet café Clip de fermeture pour toute sortes de sachets… ✅ Impression en PETG de préférence, car le clip sera plus solide. ✅ Pour une meilleure dureté, imprimez le avec un remplissage à 40% ✅ Ajout du fichier coin café…
Pièce pour agrafeuse Rocafix ES130/ Part for stapler Rocafix ES130 Category: Replacement Parts
This is a mount I designed for my Ninja Lux Cafe Pro coffee station since there isn't a good place to store it normally. I originally tried to make it magnet-mountable, but the mini magnets I had were too weak. The features for the mini…
This is a platform for tabletop wargaming. It prints without supports (upside down). Bugbear included for reference. See also my small Terrain Platform https://www.printables.com/model/646307-small-terrain-platform
Two versions available. For the ones with the tab/base, use of a small blob of removable/reusable Sticky Tack will help to keep this stuck to your table/desk/shelf.
I suggest to print with PLA or Nylon. 0.4 line width 3 perimeters 30% triangle infill Calibrate center hole to Ø4mm Lubricate axle and gear before assembly Simple replace gear in the drive module. Ensure that gear freely rotate on the…
This is a Bean Hopper Extension for the Melitta Barista Coffee Machine Series (T/TS/Smart). I was tired of having to refill the bean hopper every day, so this extension more than doubles the capacity and is a total of 80mm high including…
I have created this ornamental sculpture of a cafe racer motorcycle entirely from the ground up. You have the flexibility to adjust its size, enlarging it, reducing it, or maintaining it flat, similar to the images I have provided. This…
Different sizes capsule holder for coffe machines Don't need supports
Stackable scaffolding to use as a nice shelving unit, no need to use supports.
EUMAKERS was founded in early 2014 has become a leader in Italy and Europe for the production and marketing of PLA filaments for 3D printing. Actually EUMAKERS can count on the widest range of PLA colors on the market (over 100 tones…
A simple, abstract caffeine molecule as wall art. Probably needs to be scaled down to your desired dimensions. Category: Art
Update: Nov 2026 : I added a 2.7mm thick clip for single arm use; and then two 1.3mm clips for use on both arms. (some like it symmetrical). Use enough walls/perimeters so they are solid. Recommend using PETG for longevity. Note: Each…
[English] This is a design I made out of boredom. It's based (aesthetically) on a Volturno moka coffee pot from Argentina. It's not exactly to scale, and I took a lot of liberties because I wanted to make it really small and fully…
Die Überwurfmutter für eine Kartuschenpistole (Silikonpresse). Einfach zu drucken. Ich habe mit einer 0,8 Düse eine Layerhöhe von 0,4 verwendet. Das ist ausrechend für dieses Werkstück. Als Zusatz habe ich noch einen Haken ergänzt, mit…
Needed a place to store my caffeine addiction fuel so I made this and thought to share it :3 Highly suggested to use supports, tested with 0.2mm layer height, because I wanted to make it asap, should work fine with finer layers.
Not much to explain. Scoops 3 g of Cafiza for backflushing. Print Settings PETG/PLA, 0.4 mm nozzle/line width, 0.2 mm layers, 2 wall lines, print per model orientation.
Simple Café word for decoration. It's mirrored so it can be printed face down into a PEI sheet and have a bit of texture on its front side. There are little idents on the base so it can be easily glued in the correct orientation(but be…
Tras desafortunadamente romper la pieza original, y necesitando limpiar la cafetera, me puse manos a la obra. Teniendo como base una capsula de café, la pieza original rota, y utilizando un calibre y Fusion360, diseñe la copia, tomando…
Coffee Bean Coaster Set with Holder – Café-Inspired Drink Coasters A cosy and fun set of 3D printed coasters featuring a coffee bean pattern. Each coaster displays a scattered arrangement of raised coffee bean shapes, making it the…
This is an example Mitral Valve Scaffold for educational purposes. This one-way valve sits between the atria and the ventricles in the heart. I've included two versions with differing tolerances for printing, where Valve 2 is more…
Happy printing! Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4
As a drummer it is almost a must to collect Hardrock Cafe Drumsticks from every city where you have been. So I created a nice stand for these
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
Like it's written on it, it's just to put your mug of coffee.
Yet another coffee related coaster. :) Print instructions Unassociated tags: Caffeine Coaster Category: Kitchen & Dining Summary Yet another coffee related coaster. :) Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No…
Melitta Caffeo Solo & Milk, coffee beans extension
Practice 3d modeling for print.
Hard Rock und Hard Rock Cafe kann in 2 Farben mit Filamentwechsel gedruckt werden. Dabei sind die Schichten jeweils 2 mm und das Objekt insgesamt 4 mm.
Printing worked the best with the threads upwards.
This is a caffeine molecule for all the coffee enthusiasts. Perfect to display on your wall in your workroom or livingroom. If you know someone that doesn't function without their daily coffee, this is the perfect gift for them!
Support de Filtres à Café tout bête avec des diagramme de Voronoï :) Je l'ai imprimé sans support et sans rétraction pour économiser temps et plastique, ça fonctionne très bien mais du coup le nettoyage est un peu fastidieux. À vous de…
An easy to print and assemble replacement knob for the Breville Cafe Roma espresso machine. The original knob is notorious for breaking off (thin plastic) and Breville just would not send us a replacement part, even if we offered to pay.…
Simple bracket for a curtain rod that can be glued or screwed in place. If you need different sizes or distances, just let me know. See: https://www.kaufland.de/product/315528404/ or: https://www.bestlivings.de/Cafehausstangen
I found the idea of WBS great, although I wanted the water condensed on my glass not to drip on my desk. Because no, I don't exclusively drink coffee at work. Sometimes I enjoy a cold beverage(lol). So I made it solid with the engraved…
A simple dosing funnel for use with the Breville ESP8XL Cafe Roma 51mm portafilter. The outer ring of this model fits around the portafilter locking tabs to center it so I am unsure how universal this model will be with other 51mm…
I don't own a normal printer, so I tried to make a 3d printable version of the sign. Original font was too little and thin for it to be 3d printed so I redesigned the whole thing from the ground up. Make sure to do a color change from…
This is the first ever model I made in TinkerCAD. Still learning the ropes but I wanted to share as I went.
Cafe Sanchez logo, from Rick and Morty Print instructions Category: Signs & Logos
See V2 for most recent version of this The Cafelat Robot is a great manual espresso maker. Some complain that the stark metal ends are hard on the hands when pulling down with 9 bars of pressure. Robot “Mittens” have been one accessory…
If your hands are shaking, this will help you out. See https://www.youtube.com/watch?v=tqcsF8uFTTg for a demo of how it works and how to assemble it. Obs, the video show the old bottle, not the new one. See the images for the bottle that…
The stock 58mm Umikot works well with the Cafelat Robot - all except the stand. The Robot's deep basket requires longer needles than a typical portafilter basket. This deeper stand will allow you to store the Umikot with those longer…
Made this for the coffee machine at work... Rotate 90°... Print Settings Rafts: No Supports: Yes Resolution: 0.325 Infill: 5 Category: Kitchen & Dining
100mm coaster with a simplified, abstract caffeine molecule in the center. Source code included along with my dxf of the molecule itself. Category: Kitchen & Dining
A scale pad for Cafelat Robot with a place to mount a shot mirror. I used this: https://www.amazon.com/gp/product/B09YRJH57H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 but anything with a base diameter 35mm or less would fit just…
Storage space for capsules and stand.
Tamper de 51 mm. Diseñado en Fusion 360. Relleno: 20% Altura de capa: 0.02 Material: PLA
Just your classic 850 kg trailer, remixed version of Bonzai000's original LSVW for larger scaled prints. updated Features; removed trailer legs, updated hitch point, added tarp vents, rear reflectors, CFR plate, storage bin ribs and,…
By not inserting the empty portafilter into the machine I believe it saves the rubber gasket from wear. Also the handle sticks out a bit and that saves room on my counter. I designed it to press fit in to the lid for the water. It doesn't…
This is a stand for the G3061 PD65W heat plate (the white thing in the middle) for using it with the Cafelat Robot. It securely holds the heat plate under the piston and has a opening on the bottom to store the heat plate when not in use.…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Cafe-Staff Waddle Dee, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
Dual function dense paint scaffold and cat scat mat. It does both. New model is in blue while old is printed in white.
The stock Robot portafilter handle is chromed metal without much heft. This design pads it out a bit and makes it easier to hold. The top has a slight indention for your thumb. My original design for this was held together with tiny…
Printed it as follows on my MK4S: .15 mm layers Supports activated .4 mm nozzle PETG 3 perimeters Because of the supports you need, you may have to smoothen the surfaces with a deburring tool or sand paper for a proper sliding behavior.
These unique Text Flip models are an art form you can 3D print at home! If you like my Text Flip - Caffeine, be sure to check out the Chemistry collection: https://cults3d.com/en/design-collections/master__printer/text-flip-chemistry…
I designed this caffeine molecule with Canva and Tinkercad for be displayed on a local teacher's desk. Maybe you know someone that may also like it! Plaque and stand fit on a Bambu Lab build plate together. 2 walls 10% gyroid infill 2 top…
While using the Cafelat Robot there are times when you'd like the arms to stay in the up position without needing to use a hand. This design does this while staying relatively unobtrusive and small. These were printed in PETG as a bit of…
This is a leveling tool to be used with the original tamper of Cafelat Robot espresso machine. I've measured my tamper and the handle diameter is 26.3mm. I believe all tampers have the same dimensions, but you can check yours to make…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon Cafe ReMix inspired, Sudowodoo, Tabletop DnD miniature with or without 25 mm medium base which can be used…
¿Tienes una cafetera portátil Outin y te encanta llevarla contigo allá donde vayas? Este soporte 3D ha sido diseñado especialmente para ti: ligero, funcional y plegable , ideal para los amantes del café que valoran tanto la practicidad…
