Counting matching models…
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
A dummy bolt carrier group for Smith & Wesson M&P 15, could be used as a security device or to avoid upper deformation during smithing. Print instructions 0.3 mm 70% to 100% infill Better if you print it from PETG.
This is a carrier for Stihl AP batteries, it will fit any battery of the AP series. I got fed up of these (very expensive) things sliding around in the back of my car. It both makes them easier to carry as well as protects the batteries…
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
A simple carrier zerup syrup bottles. It holds 6 bottles and has a little handle to carry around. Mine was printed in PETG on a prusa mini. It should work as well with PLA. I am quite new at 3d modeling/printing so it remains simple. I…
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
No supports. I just made this because I wanted to try making a knurled pattern lol.
Mounting for an RGB LED strip profile to the ceiling or a wall. Dimensional specifications for the profile are provided in the attachment. Below, you will also find a link to my OnShape and I also attach a STEP file in case you wish to…
Print-in-place and Articulated Surprise Egg #7 - Tiny Car Carrier 'Making of' video: https://youtu.be/lOENd-wVnmA The cars and the egg was each designed to be printed in place without any support structures. The Car Carrier do have…
Military Style Plate Carrier for use Dummy 13 Tactical, compact, Sturdy.
I designed this Heavy Duty Grocery Bag Carrier with an added strengthening rib running through the model the same as the Bag Coat Hangers I designed. These strengthening ribs add extra wall loops in the centre of the part. That means the…
V2 Sturdier Improved load capacity with almost twice Enlarged the handle hole (previous was way too exact even for my hand) Has a top surface with more rounded corners and the bottom surface has 45 deg chamfer for easier printability This…
A battery carrier/tote for Makita 18v batteries. It's stable and won't tip over even when fully loaded on one side. I've included two versions. A low profile one, with almost no space under the batteries, and a high profile version with…
A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…
Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…
Subscribe Now! A very good model from Multiverse3DDesigns. Remixed to support free to do timelapse. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Addiction to 3D Printing? Watch…
I don't have much storage space at my place and always hated how bulky traditional beer trays were, so when I got bored and thirsty at the same time the other day, I designed this compact minimalist version. It holds the bottles by…
The bag carrier is a low-cost, 3D-printed handheld tool that distributes the weight of bags carried. This 3D Printed Assistive Device can assist people with arthritis or other disabilities to carry plastic bags and reusable bags. This bag…
I have now published the carrying aid/storage box for 2, 4 and 6 batteries. What do you think is still missing? Update: 2023-02-16 - Carrier for 2 batteries 2023-12-20 - Carrier for 6 batteries
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
In an attempt to get more organized with my tools and batteries, I wanted to make something that I could use to store the batteries as well as use as a way of easily transporting the batteries when I have to take them with me. I have…
BOM: Printed with ROSA3D Starter PLA Light Blue Stop letting heavy plastic bags cut into your fingers! This simple, ergonomic shopping bag carrier is an absolute must-have for anyone who regularly walks home from the grocery store. The…
Both print are for Prusa Lack Enclosure modofocation. Carrier is designed for original Spool Holder. Print with 0.2 mm layer.
I know there are other bag carrier designs floating around on Thingiverse. This is my take on the design. I designed it to incorporate the curves to fit the hand better and allow for a more comfortable grip. The hooks are also designed to…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- Disclaimer: If you're into skiing, you'll absolutely love this. Just print 2 copies, and say goodbye to the hassle…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
Carry 6 DEWALT 20v batteries to and from the job site with this sturdy carrier. Printed in Creality PETG with 10% infill and 3 walls. Just a few supports suggested for the handle.
USS Nimitz Category: Models
Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…
The easiest way to start camera scanning. Do you have boxes of old negatives that you've been wanting to preserve but never got around to it? Are you tired of outdated, slow flatbed film scanners that take hours to scan a few rolls of…
Are you tired of major internet celebrities like me telling you what your Dummy's kit should be? Do you think that freedom means you should be able to choose it yourself? This, then, is your solution; the Dummy 13 Modular Plate Carrier.…
Remixed from m*bergman's excellent Stryker lineup, which is in real life a remix of the GDLS LAV 3. The LAV 6 ISC is the latest in-service version of the mowag piranha lineup, which entered service in 1974. (…
Description in English below Update 20.06.25 Kiste ohne Ausnehmungen hinzugefügt Update 08.05.25 Wieselburger Logos hinzugefügt Update 07.04.25 Griffe und Stopper für Montage mit Zylinderkopfschrauben M3x14 oder M3x15…
This film carrier provides great film flatness and smooth film feeding action while being quick to print and easy to assemble. This design is my attempt to improve on existing 3D printed film carrier designs, focusing on film flatness and…
This model isn't balanced and therefore not suitable for playing in water I was originally working on a larger model with the idea being it would be printed on a belt printer, but as I didn't have access to do a test print I abandoned…
I couldn't find any good Helicarrier models online, or at least one for 3D printing, so I made one myself. It's probably only about 80% accurate and fairly low poly, but it looks pretty decent as a small model (although my paint job…
Foregrip Mag Carrier by Qwerm A picatinny mounted foregrip that holds a spare AR15 magazine. A copy of FAB Defense's MG-20. Included is an optional "Blocker" STL that can be used to change Cura's fuzzy skin settings for the finger…
This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. Thanks to…
What is it? It's a drinks (beer) carrier that can hold four standard-size cans and/or bottles and can fold down for easy transport, can lock down with magnets. Great for taking beer to parties, sporting events or drinking it alone in a…
Introducing the Durable Dog Poo Bag Dispenser - 1,5h print for one set Say goodbye to flimsy waste bag holders with our Durable Dog Poo Bag Dispenser ! Designed to be attached to your leash like a keychain, this tough and unbreakable…
I was very surprised at not finding this here. It's just a grip that slides under your wood/gypsum etc panel to help lift it. I made it to fit a 24x24cm bed, no support needed. Rare thing that happens: it's perfect (at least for me) on…
Video overview here: Usage demo here (0:23): ---------------------------------------------------------------------------------------- These are shell carriers/holders for Silly Shells ! They all hold Silly Shells horizontally across the…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
3D Printed Beer Carrier – Keep Your Drinks Colder for Longer! 🍻❄ Tired of your beer getting warm before you've had a chance to finish it? This smart 3D printed beer carrier holds six cans and is designed to work with the Biltema ice pack…
This is a robust support for the cable carrier on the K1 Max. It will need supports to build this file. Created this file in PTC CREO Perimetric v9.0 if you would like the file. Does not interfere with the print head and spans farther…
[EN] I liked the minimalistic approach by Franco for his six pack beer bottle carrier. But I don't like to use 100% infill and want a more organic look. I also added a 2-pack and a 4-pack to the 6-pack because sometimes you are not that…
Holder for 6 Milwaukee M18 Batteries with Handle – Maximum Storage and Portability This holder is the ultimate solution for Milwaukee M18 users who need efficient storage for multiple batteries. Designed to accommodate up to six…
Great way to carry shopping bags in multiples. I hate multiple trips so this is great. The higher infill the better. I like to print this in PETG.
I had some issues while printing this. Also got the input from a friend that a bottle opener attached to it would be nice. So I remixed it for a slightly better printability and added a standard bottle opener to the design. You have to…
Pretty simple to print but a bit fiddly to get the door in when assembling. you put in the bottom hinge in the bottom part and then you press fit the top while aligning the door.
Water Bottle Handle Carrier Lifter Print without support Infill more than 20% is better Use PETG material Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.26 Infill: 20% Gyroid…
Hot 2 Handle Carry your hot or cold beverages with ease! Features Stop singeing your fingers on piping hot coffee cups! Free your hand to open car or building doors while carrying your beverages safely in the other. Designed to fit a wide…
This battlecarrier Bismarck version is fully printable and I actually printed it, but I didnt finish the paintjob so I decided to upload just the render. For Scale 1:350 please use the cura scale 0,285% because the model is in 1:1 scale.…
The LAV III Kodiak is a GDLS development of the Mowag Piranha initially introduced in 1974. This lav 3 is a remix of the excellent m bergman's Stryker vehicle lineup, which is itself in real life a remix of the GDLS LAV 3 lineup! I've…
Finally the perfect solution to storing all your flexi toys has arrived, it's super strong and fully 3D printed, your flexi pets can have a home of their own. Requires no glue, it's fully 3D printed with a hinged a lockable door that's…
Usefull for transporting batteries from the house to the shed. It frees up one hand so you can open doors with the other. Features Can transport 2 batteries Battery slides in easily and holds well in place Large handle to use with…
Someone had suggested to make a tray to hold the components of the bolt carrier group (BCG) of the AR15 style rifle. I have yet to print this and I'm not sure if I will end up printing it as I have a cleaning mat that has a magnetic tray…
25mm Length extension of the excellent design by paulorfo (https://www.printables.com/model/236847-ski-and-pole-carrier). The original design was long enough to fit my wife's skis but not mine. Thank you to the original designer for…
Cut Away Model of an AR15 Bolt Carrier Assembly scaled to 200% for demonstration and education purposes. I made the ejector longer than usual. This way you can trim it to length to accommodate different lengths of springs you might have…
Here is my version of a plate carrier for your SWAT or military Dummy. I've included two versions depending on what you're in to. The first is a Police branded plate carrier with a flashlight, mags on the front and a radio on the back.…
Kel-Tec P17 Mag carrier Reupload from thingiverse.com by hello_there_pal Kel-Tec P17 holster https://www.printables.com/pl/model/563948-holster-for-kel-tec-p17
Use case When your are doing action camera videos from your motorbike, bicycle, mountain bike, paraglider, etc., you don't have a lot of space but need a lot of SD cards. This is what this tough but very compact container is made for. It…
I needed a phone holder like this for my plate carrier. I'll update this model soon for build instructions and more pictures.
Six pack beer bottle carrier. Printed with PLA 100% infill. It's very rigid and works well. You could add a color change above 5mm height to highlight the writing. Enjoy! Print instructions I would print at 100% infill if using PLA.
PLAb System We all love our friends at ThorLabs, but sometimes you just need a part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. A component of the growing PLAb Collection of 3D printable…
My creativity level sky rockets when I'm drunk. For some reason, I decided to design and print a 6 pack 0.5L bottle holder yesterday evening, haha. It even has a lid! Don't ask why :P I guess I was looking for things to do, having a…
We've all tried the old one trip wonder but with this you can do it without cutting the circulation off of your fingers.
needed a case for my smokes when i switch to ryo. Any modles i could find were either not robust enough for my lifestyle or would allow the tobacco to shake out of the tubes during the day. couple this with my other model (butt-hole) and…
Qidi Plus 4 Custom Front Tool-head carrier plate A Custom Front Tool-Head Carrier Plate for the Qidi Plus 4 3D Printer which serves as a base framework to attach various mods to. A handful of some basic attachment mods are also provided,…
Simple case designed for the orange pi 5 sbc. Designed in Fusion 360. Print the lid upside down, the embossed logo should not require support if cooling is sufficient. For the case itself, supports under the holes is advised as these span…
This is a modified version of the yarn carrier guide of the CSM version which JeepingJohnny introduced. The idea is based on KaitlynABCs remix. In my case, I had the problem that the yarn was fed a little uneven through the big whole on…
Printed with Prusament PETG Jet black. Katana sword model: Katana for Lucky 13 by kh4rj0 | Download free STL model | Printables.com
Includes precut holes for diameter 6x4mm M4 Heat inserts or standard M4 hex nuts. Compatible with original and clone Brompton front carrier blocks
The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…
AnyCubic Kobra S1 Bed Carrier upgrade - use: 4mm thick 3K Carbon fibre for the CF version 4mm thick 7075 Aluminium, or Mild Steel for the Metal version The squarish CF version is my design, the more triangular Metal version is by @Kanrog…
This bag carrier makes it easy to carry multiple items at once with a single-hook design that keeps the load centered, and an ergonomic natural-curve handle that fits comfortably in your hand. This is as strong as the walls you give it,…
I designed a custom carrier that perfectly holds both a can of Monster and a tin of Zyn, making it easy to bring my favorite duo anywhere. It’s compact, durable, and looks clean—like it was made to be part of my daily setup. Whether I'm…
MN90/99 D90 Rear Roll Bar with and without tire carrier. You'll need to get quite a bit of support for this to all work; but it turned out really well. Both options are included in the file. You'll need 2 x M2 15mm or better to hold the…
Hot 4 Handle Carry your hot or cold beverages with ease! Features New Jumbo size holds up to 4 cups! Print 2 for up to 8 cups!! Stop singeing your fingers on piping hot coffee cups! Free your hand to open car or building doors while…
a new fun model, but with planes this time
(Water) bottle carrier, perfect to hang on the side of your backpack or on your belt. Tested it with a full 1 liter bottle, see picture. If you like the model please leave a download and/or a like. If you need a special size, leave a…
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 11 23ml…
flat printable cable tow chain - cable drag chain - Energieführungskette
HMS Invincible Aircraft Carrier from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
A beautiful, minimalist, and timeless Christmas angel carefully holding an LED tealight in its arms. This small scene is simple, yet moving, and simply a joy to look at. The model has the standard dimensions of 220 mm x 140 mm x 104 mm…
Nice small carrier for 4 beers or soda. Not much to say…Prints without support. I printet it with 0,2 layer height and 20% infill, skirt, and no support. Came out fine, but needed a little sandpaper in the top of the holes.
In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite the endless…
My Dummy SWAT team seems to be always growing (I may have a problem) and I'm starting to customize each character. If my modular vest system isn't your thing, this might be what you're after. This breaching orientated plate carrier has a…
An aircraft carrier that my friend made on ROBLOX for roleplay purposes. I simplified it down for 3D printing. It is heavily based on, but is not exactly, an Invincible-class aircraft carrier. Use Prusaslicer's cut function to print the…
Adapter for mounting SSDs in existing 3.5" server hotswap bays that has some sort of bottom support. Tested on Dell, HP/HPE old-style and HPE “smart” -carriers. Use 3 of the original screws to fasten the adapter Insert the two small pegs…
These are 35mm and medium format film carriers which are designed to be very simple but still highly functional. They use a double S-curve design to keep the film flat and have a small film-to-light distance (35mm: 2.8mm, medium format:…
Benchy + Helicarrier = BenchyCarrier Benchy is back! Print with any settings. Test your printer!
A friend wanted a 4-way drink caddy to free up a hand. The ones I could find wouldn't fit on my Anycubic Kobra Go's small print area of 220x220x250mm so I came up with this design. The inner diameter of the cup holding sections is 80mm…
I made a holder for two and four batteries with a handle to make it easier to carry. I printed it with PETG plastic, laid on its side. Supports are required.
This is a fix for the V-spooler. The Cam guide stuck and I had no luck with it. But another user on bambulabs had made a wider guide and a larger cam tooth. so I made the files myself and now it works a treat.
Overview: This is carrier for four Parkside X20V batteries. It is useful for storing and transporting batteries. The model is lightweight, strong, and easy to print, with tilted slots for quick battery insertion and removal. I recommend…
Please Like and Download
Required additional parts 5x M3 inserts 4x M3 countersunk screw 10mm 1x M3 screw > 20mm Optional parts MagSafe holder with a 17mm ball-head to work as a iPhone or iPad holder (see images) Print Instructions Print the ball-head at min 60%…
