Counting matching models…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
The cables can be placed in the compartments without getting twisted. I printed this holder in PETG using a 0.6 mm nozzle with 9% infill and 3 wall layers.
SMALLER Organizer for USB cables and chargers - 5 slots | REMIX 5 slots instead of 10 | +1.5cm-version | rounded edges | EU/US/UK Charger versions note: Reduced the slots from 10 to 5 and rounded some edges. Also there is an additional…
This is a 3x1 gridfinity bin designed to store USB wall chargers with a North American style plug. The bin has holes on the underside for press fitting 6x2mm magnets if you so choose. It is 4 units tall, and has a lip so you can stack…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
Thanks to MichMich for uploading the Fusion360 file and the latest remix. What is this? This is a remix of a remix of a stand for an Apple Watch. This stand is perfect for charging your Apple Watch on a table while being able to see the…
Update 12/20/2025: Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only). Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable. I designed my own version…
A cheap alternative to the discontinued Olight omino dock. You use your own magnetic chargers to make a 4 port charger. Any cheap 4 port usb-a charger will work for this: USB Charger Cube, Wall Charger Plug, AILKIN 4.8A 4-Muti Port USB…
Remixed the original to remove the logo and the Ledge for the watch. (When you have a watch case it interferes, and the magnet is strong enough to hold the watch anyway.) Also removed the AirPod Charging slot since I do not have any nor…
We have a PHEV and wanted to have a place to keep the charger cord outside since the car is most often parked in the driveway. SCRAT82 had a great design but the screw centers were too close - we wanted the screws to line up with the…
Printed in PETG but PLA fine. Designed for M4 Inserts and M4 Screws but M3 work in both cases. Used 0.6 nozzle with .3 layer height. No supports needed.
This is a wall mount for 2 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
I like my new car's wireless CarPlay feature, but the added power drain made me wish I had a wireless charger. One charger for the little cubby under the headunit and a second in the center console tray makes a nice pair of chargers for…
This stand was designed with the following goals: Fit up to largest iPhone horizontally (for new standby mode) or vertically Fit up to largest Apple Watch (with ledge that holds heavier ones) Hollowed rear sections to help heat…
This Wireless Charger Stand/Dock is a precisely designed 3D model tailored to fit Spigen and other chargers with a diameter of up to 100mm. It offers a secure, stable platform for your wireless charger, with integrated cable management to…
Organize Australian USB wall chargers in this 3x1 Gridfinity Bin
For mounting chargers, power strips onto pegboard. Mix and match the centered and off-center plug for 1/2 inch increment of mounting hole distance. The two Ryobi chargers mounting holes are 2-1/2 and 4-1/2 inches respectively.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I needed a more flexible but still more stable solution to fit different charger models.
www.patreon.com/bkprint3d
Here is the awesome looking Los Angeles Chargers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
print left side down, no supports requiered
This is a Honeycomb Storage Wall compatible mount for 2 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
Charging Station for Apple Watch and iPhone Magsafe Chargers. Fill with gold coins for more weight.
I made this strip to organize my USB AC/DC power adapters, USB cables, USB keys and similar items. This project has been designed to accomodate power adapters with standard europlugs, but strips for different plugs will be made if…
This is a remake of the linked model. My wife and I wanted a stand for both of our chargers. Includes a space underneath the model in the back to route the power cables to either side.
Los Angeles Chargers Oversized Necklace Logo that I designed. I hope you enjoy!
Remixed to remove shelf from Phone side
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
Hi! I present you a model of an organizer that is installed under the table. I made 2 sizes - 10 and 15 cm. Thus, you can assemble any configuration of the organizer with a length starting from 10 cm and with a step of 5 cm. You can…
This is a wall mount for 4 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…
Quick and easy accessory to hang our 4ah x20v series battery chargers on the wall, molded in petg 70% gyroid filling
Two and four Oral B Chargers Holders. Accessories : Tow chargers : Needs four M3x8mm SHCS Three chargers : Needs four M3x8mm SHCS Four chargers : Needs six M3x8mm SHCS Five chargers : Needs eight M3x8mm SHCS 20/08/2026 Adding three and…
Just a little thing which I made
Holder for CTEK chargers from 3.8A to 5.0A like CT5, MXS3.8, MXS5.0 with the matching Bumper. You'll also need: 2x Rubber bands, O-Rings or TPU printed rings with around 60mm diameter For use with the seat console holder: 4x M4x6x6mm heat…
a holder for three apple cables, attached with 2-sided tape
Features Holds up to 27 CR425 batteries (approx. 4×25 mm each) Slots for 2 USB chargers – always have a backup ready Extra storage compartment – for cables, float tips, or spare parts Secure fit – batteries stay in place without rattling…
Cord Hanger for your EV charger with 2x counter sunk hole for screw 150mm in length 200mm arc radius around 40mm height 10mm screw hole, counter sunk to 5mm will need screws - depends on how deep you want to go. I used wood screw to hang…
This Wireless Charger Stand/Dock is a precisely designed 3D model tailored to fit Spigen and other chargers with a diameter of up to 100mm. It offers a secure, stable platform for your wireless charger, with integrated cable management to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This is a Honeycomb Storage Wall compatible mount for 4 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
Just a logo converted from an image. I would be a cool project for MMU or paused color change in PrusaSlicer.
Simple vase mode print to hold 6 of the little sample vials of ink from Ferris Wheel Press. I printed this using ProtoPasta's Nebula Stardust, and it was only 3g. It also fits AA batteries if you size it down a few %. I printed this with…
Very well designed cleaning tool to clean USB, lightning or C charger. I was very surprised how the cleaning tool works and how much dust I got out of my phone or airpods.
My workspace was full with an army of battery chargers and other power bricks… You know the ones, the bulky "brick" style chargers with the electric prongs sticking straight out of the back. They don’t sit flat on a shelf, they tangle up…
There is one group of organizers where USB chargers from Europe, US and Japan can be inserted. The other group is for cables only. In each group there are 3 different sizes (indicated ..s,.. m, ..l). Short or thin cables fit better into…
I discovered most models for charging stands for the Samsung watch use the factory charger. I bought some cheaper knock-off chargers on Amazon. They were too big to fit every other model I found. The factory Samsung charger is about 34X9…
This is a battery adapter that will allow you to insert D cell batteries into a LiitoKala Engineer Lii-500. I included the Fusion 360 file, so you can customize it to fit other applications, but odds are it will fit most 4+ 18650 based…
Here is a great gift or personal treat: Los Angeles Chargers Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print…
Los Angles Chargers keychain print in PLA. The color change from white to yellow occurs at 2.5mm and the change from yellow to blue occurs at 3mm.
This is a wall mount for 3 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and…
This is a Honeycomb Storage Wall compatible mount for 3 SRAM AXS chargers. I have taken the original file, made it HSW compatible and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems…
TWS earbuds from K-Mart (ANKO) and The Reject Shop are okay for my wife's and my use for podcasts and occasional music listening, but hers, the ANKO TWS, are in a small slippery charger case and my TRS buds' charger has a stupid raised…
Stop ripping open bags or having the sharp edges dig into your back! Chi's compact hypercharger for XR and the popular AFU chargers from aliexpress have some sharp edges that bothered me for a while, so I fixed it with some TPU bumpers!…
3D Model of the Los Chargers Skull. Pulled it off a t-shirt by taking a picture, vectorizing it and extruding in Fusion. Using this model for a slightly larger project thought another fan may enjoy it. Bolt up!
Stand/Wall Mount for Ctek Chargers If you like the project and would like to like it, I'd be very grateful ;-)
I print this support to collect SRAM battey charger, my garmin edge unit and Garmin radar and fix it toghether on my workbench wall. For singles supports I used Garmin and SRAM other projects .
Attached to the drawer with double side tape.
Organizer for various cables, chargers and earbuds case. Containing 5 slots for chargers and 10 for cables. General Dimensions: (all dimensions are in cm) 21x18x5.3 Dimension of the holes for USB cables: Bottom: 3.7x5x5.7 Middle:…
BOM Hardware Printed Parts BC660 4x M3 Heatset Inserts 2x M3x12mm 2x M3x8mm (can sub x12mm) Optional, if using rear retainer 2x M3x8mm (can sub up to x12mm) Note : SHCS or BHCS will both work. BHCS is nicer for the rear retainer Plate…
I’ve made a double wallmount for the two chargers for our e-bikes. The chargers are sitting upright and there is an opening in the bottom of each section for the battery-cords. The 240 V cables are on top. Separate wall hooks to hang the…
Simple organizer created for 3x USB chargers and 3x pendrives in two versions. First (simple) is presented on the photos, is designed to be mounted using two-sided tape or screws (requires making holes using driller). I used both options…
GoPro stand-alone chargers often fall over when you're putting in or taking out batteries, so this holds three dual chargers neatly and stable on your desk.
stores the AC plugs adaptors from 3 pin to 2 pin using gridfinity
Bring your favorite NFL team to life with this oversized Chargers logo! This model was designed with clean details and printability in mind, making it a fun project for football fans, collectors, and makers alike. Whether you're…
I was bumping against the charger in my cigarette lighter all the time and thereby damaging the cable plugged into it. This should keep you from damaging that cable. This cable guard sits between the flared base of the charger and the…
It's really big. You will definitely need more than 1.5 kg of filament. It will fold up if you print it in PLA but try to give it more infill if you can. The parts fit together without glue, but I would strongly advise to glue it with a…
Have an AU and universal model
I have an unreasonable number of USB bricks and a few adapters and other things that also have a US plug (either a Type A or a Type B ) all of similar size that require storage. Because I am obsessed with Gridfinity, I decided to design…
Simple friction fit adapter for Apple Watch wireless chargers to fit Xiaomi mi smart bands instead. Tested on the smart band 4 but should work across all mi smart band models as the charger has remained the same Easy to install: 1. Push…
Hi! This is gridfinity charger holder made for 5 chargers
Para dejar ordenados y localizados los cargadores en tu mesa he diseñado dos modelos remezclados y modificados de un diseño mío anterior: https://www.printables.com/model/989931-el-batcharger-y-varios-mas-the-batcharger-and-seve Son dos…
A while ago I started watching through all the seasons of power rangers and realized I wanted the cool and sometimes silly looking weapons and accessories they were using. I wanted to start with something not to complicated but still had…
A set of replacement knobs for American Farm Works branded electric fence chargers. SVG files included for OpenSCAD customization. Layer height: 0.15mm Infill 25% Perimeters: 3 No Supports
Ich habe einen Leuchtkasten für das jüngste NFL-Team "Chargers" erstellt. Ich hoffe, du hast viel Spaß damit. Du darfst in deiner privaten Umgebung damit tun, was du willst - aber verkaufe es nicht. Ich kann die folgenden Einstellungen…
Most spring loaded terminal chargers have difficulty creating a stable contact with AAA batteries due to the small diameter of the AAA battery. Typically you would need to hold the battery higher and let the spring terminals put pressure…
For all you Los Angeles Chargers fans. Category: 3D Printing
ISDT UC4 18W 1.5A 1S USB Charger Storage Container to store 4 chargers. For ultimate tinywhoop fliers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Mount for two Ryobi ONE+ BCL14181H chargers to IKEA Skadis/Skådis pegboard. For attachment use Skadis T-Clip System by Line Arc Line .
One of the problems we have in the school is that laptop chargers fall on the floor and break, cables come out and it's dangerous. We take the opportunity to fix and improve them with 3D printing!
These joints are designed to dare to stack vertically instead of horizontally.
Screws are 3,5x25 and cable gland is PG7 Category: Sport & Outdoors
I attached it with double-sided tape in the kitchen so that the chargers wouldn’t be lying around on the table.
I fly a lot of packs for S&R of Young Game missions before the hay harvest with the Mavic 3 Thermal Drone, so I need a quick and mobile solution to reload in the Field. I already have powerfull RC-Chargers, so I make an adapter for the…
This is a Makita charger quick mount, meaning you can just press it in place when you want the charger to sit firm onto the pegboard and then just pull it loose when you need to take it away for working elsewhere when you need the charger…
Simple desktop organizer with separate boxes for storing USB chargers and cables. It includes 6 boxes (36 x 54 mm), 7 boxes (30.7 x 42 mm), and 8 boxes (16.8 x 42 mm), each 60 mm tall.
⚡ Gridfinity 2x3 Bin for Apple Chargers & AirPods Pro – Desk Organizer for Tech Essentials This compact and efficient 2x3 Gridfinity bin is designed to neatly store your essential Apple devices—all in one place. Whether it’s your work…
Printer: Anet A8 plus Hotend temp: 200C Hotbed temp: 60C Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Yes Resolution: 0.16 Infill: 10% Filament: Generic PLA PLA Black Post-Printing ============= This is an insert for…
This is a simple model I made to organize around three phone chargers (large block of 42mm x 29mm footprint) and cables. Can be used of course for general purpose too. Attached to any surface with double-sided adhesive tape. It is a very…
Simple but effective way of mounting a 16mm or 17mm ball on dash of Ineos. Replaces any of the Ineos cap screws on dash. I printed in Protopasta PETG CF with 50% infill, supports on build plate. The ball fits into hole that hold the cap…
The Baseus 20W Dual Wireless Charger Holder is a charging device designed to charge two devices simultaneously
This model fits over the top of the main wireless charging coil, introducing a 2.5mm gap between the coil and the phone. This distance was necessary with the coils I bought. Without adding this gap, the charging coil rapidly connected and…
This is a simple model to allow cables to pass through any desk or table next to a wall. It can be resized to fit your needs. To cut a hole, trace the bottom of the main body on the desk, then use a jigsaw or multi tool to make the cut.…
Replace Ford Festiva / Kia Pride Pop / mazda 121 center console ashtray with USB chargers. I bought the 12V 4‑port USB charger from Aliexpress for around 6 USD, along with a 2‑pin harness connector so it can be easily unplugged. To mount…
Precision Alignment for Charging This is a functional 3D printable adapter specifically designed and tested for the Technics EAH-AZ100 headphone case. EAH-AZ100 supports wireless charging, its small form factor prevents it from reaching…
Pegboard adapters for Dewalt battery chargers, 4" horizontal and 2.5" vertical spacings.
