1,014 models
Cette sculpture 3D de tête de cheval représente l’élégance et la force de cet animal noble. Le modèle est conçu avec des détails réalistes, allant des oreilles expressives à la crinière texturée. Impression : Convient aux imprimantes FDM…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
This is a simple valve stem cap I made for my Chevy. Great idea for a gift or just to doll up your ride. You may need to print it with a brim! The pre-sliced file is for 5 caps. Color break is at 14.3.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
44mm x 14mm 6mm keyring hole 4.8mm tall (4mm base and .8 color switch.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
Please click ❤ LIKE ❤ if you appreciate my work 😊 The American icon of speed – now as a stunning wall art piece. This 3D printable Chevrolet Corvette C7 model captures the sleek, aggressive lines of the legendary American sports car.…
Chevrolet keychain
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Save yourself $250 for a new programmed key fob by fixing the deteriorating buttons. The flexible plastic/rubber portion of my Cherolet key fob turned to goo. It made a mess and some buttons tore out. I cut out the remaining buttons,…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This model was printed out of PLA with basic settings. Use any colors you want, let the imagination be the limit !
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
Il s'agit d'un petit chevalet “réservé” pour les restaurateurs notamment. vous pouvez vous en servir pour le poser sur une table pour signaler que la table est réservée. Dimensions du model: 6cm de long ; 3cm de haut et de large Très…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
From my Google Lens search, it appears this handle fits between a 1994-2004 GMC/Chevrolet model vehicles. I made this handle from scratch. It took me about 6 prints to get it just right while also improving it so that it cannot break. You…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Récompenser votre animal avec cette accessoire (Grat - Grat) A réaliser de préférence en PETG ou ASA pour plus de résistance.
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Zurecht gearbeitet speziell für Chevi Cruze
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Hey les makers ! J'ai essayez de trouver un model pour mettre mon sèche cheveux un peu modern mais à la fois simple et efficace mais j'en trouvez pas donc j'en ai fait un moi même ! Simple, efficace et modern à la fois ! ⚠ Sans trou !…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
For older Chevy Suburbans with those spring-loaded push latches on the backside of the rear seats. Do not print in PLA. PETG or ABS/ASA would be best. Fusion 360 CAD files included.
Summary This is a model of a Chevrolet Camaro RS/SS (1967) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned,…
This truck has wheels that turn and suspension that prints together with the chassi also the bonnet and tailgate have a hinge that works To build this model you will need: -glue -3mm metal rod 2x pieces 64mm long for the axels 1x piece…
Print with 0 infill, 0 top layers, and 3 walls.
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
Chevrolet car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Summary This is a model of a Chevrolet Corvette Z06 (C6) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of integrated…
Here are two chevrolet logo pieces. One of them is thicker and meant to be a decoration, while the other is fit for the grille on an early 1980s Chevy C10 grille. If printing it for that, I would recommend using ASA or a similar strong…
Keychain with raised Chevrolet bowtie emblem.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
These were designed to have a flat back, thus make them mountable on flat surfaces using the appropriate adhesive. The height as it lays on its back is at 6.5 mm. The width is between 102-115 mm. The Length at 176 mm. I recommend the…
1969 Camaro Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…
3D printed model shown in the image was done with 0.15 layer height /30 percent infill/PLA only Body part needs support Dimension: 128x51x43mm simple assembly therefore does not require further explanation just glue the parts together
This is a model of the Advent House from Chevy Chase’s movie Christmas Vacation. It was only used in a couple of scenes, where opening the windows was used to mark the passage of time in the movie. The body of the main house can be 3D…
Cheech and Chongs Love Machine 1964 Chevy Impala SS. Lovemachine = Love Machine -less interior decorations. Lovemachine2 = Thicker Model - but the love machine decal lost some of its punch. lovemachineextra = Lovemachine + Interior…
Bring the power of American muscle to your shelf! This high-quality 3D model of the Chevrolet Camaro 1990 is a detailed STL file perfect for collectors, automotive fans, or scale model enthusiasts. Designed with clean geometry, this model…
Welcome to The Low Poly Auto Show! This is a low-poly 1964 Stingray. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…
A simple design inspired by chevron pattern planks. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the pleasure to…
Designed to replace the foil sticker one on a 73-75 plastic Chevy grill found on squarebody trucks. I lost the sticker a long time ago, so I made this one. Recommend printing in ASA or similar for UV protection and adhears with glue or 3M…
Chevrolet Corvette C8 2020 Modèle de voiture imprimable en 3D, tout comme le vrai. La Chevrolet Corvette C8 est la huitième génération de la Corvette voiture de sport fabriquée par le constructeur automobile américain Chevrolet. La Chevy…
petg 30%infil, wall 4mm no supports
A small, easy-to-print bracket to help reinforce cracked dashboards in 95-98 Chevrolet trucks
This model is a detailed 3D printable replica of the classic Chevrolet Truck 3100 on a kit card! The design captures the vintage appeal of the truck, complete with iconic features like rounded fenders, a distinct front grille, and smooth…
Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card
can be printed together or separately in other colours can be printed without support the Chevrolet Avalanche is very realistic Print in place kit card , Assembly required
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
Celebrate the spirit of American workhorses with this 3D printable STL model of a Chevrolet Silverado Pickup Truck. This classic truck model is perfect for automotive enthusiasts and fans of rugged American vehicles looking to display…
This is a new Engine Holder for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). I modeled a new holder to support the weight of he engine (more than 3Kg with accessories, and there are still many elements to add).…
Designed up this stake pocket hole filler to fill the rear holes in the 2019 Chevy truck I just received as a work truck. We just removed the cap that was installed by the dealer. The front pockets had covers but the rear didn't. I tried…
As any Colorado or Canyon truck owner knows, the first must have accessory is a tray/organizer to make the cavernous center console space a little more useful. This tray covers the entire console area for models without the USB charger…
This is Headers Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Exhaust collector for driver and passenger sides Print…
Gauge pod based of a 3D scan of the factory vent for the Chevy Colorado. PLA wont hold up, PETG, ABS, etc should be fine. UPDATE: Slightly thickened to prevent warping.
Wanted so bad to have a mocked up Twin Turbo LS3. :) Remix of the Manifolds to add the Wastegate https://www.thingiverse.com/thing:4787340 Remix of the Outlet Pipe and Clamps https://www.thingiverse.com/thing:4633524 Remix of the Engine…
I like the truck by Printed Bits , but the empty engine compartment gave it a little incomplete feeling. So i searched some familiar sites for a suitable engine to bash into it and found this one on thingiverse - it's even actually a…
Trailer Hitch for 2in adapter and half-inch pin.
The other models used in the photo Exhaust and water pump covers: https://www.thingiverse.com/thing:4338145
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended)
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
This is Oil Pan Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Dry Sump Connector . Plugs . Holes for electric components…
A remix of the wonderful Chevy Chase Advent House by mcmaven (2023 version) I changed only a few parts, you need still the original parts by mcmaven For the walls: you can just print them faced down and add a filament change, no…
It's a 2020 Chevrolet Corvette. You can drive it and it has lego duplo clips on the seats.
This is a Main Belt Tensioner for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Not having plans, all these pieces were designed from photos found on the net. Despite the constraints of 3D printing and accessories, I…
I printed this with 2 walls, no infill, no top layers, and a .2mm layer height.
Just combined a few models into a little sign you could print to put by your keys or something. I added some small connectors to the pieces that would be detached from the rest once printed. After printing this once, it is Very delicate.…
At this point there have been enough success reports that I think it's safe to say this fits most trucks with fairly wide slots for 2x8" bed dividers. Known good list is below. I'm sure there is a reason the Chevy Colorado has about ½" of…
Modular drop in dash mount for 2024+ Chevrolet and GMC trucks with 13.4" touchscreen. Additional hardware required for assembly (see BOM below). The included .f3d file is parametric and will allow inputs for phone size and desired arm…
Scaled to 102.5% of the original size as an option to friction fit instead of using electrical tape. I strongly recommend printing one first, test fitting on your vehicle, then adjusting the scale accordingly. Printed on a P1S using Black…
This is Ignition Kit extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The Spark Plug is made by Thebush1951 ( https://www.thingiverse.com/thing:3896150 ). Print instructions Printer Brand: Prusa Printer:…
Small remix of rear seat cupholders for 2015-2020 GMC Yukon/Chevrolet Tahoe, I added a GMC, Denali, and logo-less version. Enjoy! (Better pictures coming soon) Print Settings: eSun Black PLA+ filament 210/65 C 0.20 mm layer height Leave a…
This is a sweet 1970 Camaro for your Hot Wheels collection. It's an even simpler process to finish this car than my other Hot Wheels models are. My other vehicles have a chassis' that are printed separately and then glued onto the bodies.…
Here is a pretty nice '72 Chevy to add to your collection. Printing it is approximately the same procedure as my other Hot wheels models, I printed with a 0.2mm nozzle, but that's because I suck at sanding out the layer lines lol. Use…
1967 Chevy Chevelle Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and…
Easy to print Chevy keychain Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
k vond dit en leek me leuk voor op printables
Hooks to the headrest post on many Chevy truck seat, maybe others. Has built-in support, no auto-generated support needed. Print in ASA so it won't melt in hot summer car temps, unless you live in a very cold climate or only use in…
This is Accessories extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk silver, black, bronze and yellow…
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
I remixed the original model to include the Chevrolet logo as an Inlay.
Hey cruze community my name is Jacob. I inherited my mom's gen one after she passed and have been building it since. Saw an older post where someone made a triple gauge pod for the center dash lid and there wasn't a way for anyone to buy…
Fuel line clip made for my Chevrolet Prisma. May fit other vehicles.
I made this as a gift to fit into the receiver on a chevy tahoe. It would probably work with most class II/III hitch receivers. Printed with the chevy logo up with supports. Print instructions Category: Automotive
These designs were made with a flat-back surface to be wall mountable. The height of these designs, while laying on it's back, is 8 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure. ***NOTE*** Each USCG…
Chevrolet Camaro - wall art, easy to print
My Chevy (Volt plug-in hybrid) has done me proud over the 9+ years of service, but it is starting to show signs of age. One of the little things that broke was my sun visor clip, so the visor swings back and forth depending on whether I'm…
This is Timing Cover Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Cam Sensor . Cam Sensor Holder Release 09/12/2019 : New version of…
Chevreuse : Genshin Impact
Jason voorhees mask part 4/IV template. people are selling pdf tempates for a few bucks. but i have a printer and spare time :) I made the template in fusion 360 with the correct dimensions. how to use: Place the template on a paper. use…
This is Valley Plate Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gasket Print instructions Printer Brand: Prusa Printer: I3 MK3S…
Diseño Este modelo 3D del Chevrolet Corsa 2001 capta fielmente los detalles del coche original, centrándose en líneas suaves y una representación precisa de sus características externas. Uso Ideal para coleccionistas de miniaturas de…
08 Chevy Silverado GMC Sierra Key Fob- No Auto Start If you like what I'm doing here, please consider making a small donation .
This is a chevron nozzle for the famous "3D Printable Jet Engine" by Catiav5ftw. You can find his model on Thingiverse. ++++Print details++++ designed for 0.15mm Layerheight no supports needed #####GERMAN##### Dies ist ein Chevron…
1957 Chevy Bel Air, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
This is a 3D printed mold for resin casting pen making blanks. In response to a question from a maker, the mold is sacrificial. The intent is to turn away the mold on the lathe. Do not use mold release! Print Settings Printer Brand: Prusa…
Print, take a photo, public on Instagram ad tag my page nani3d 3D PRINTING SETTINGS I have print it with 0.25mm nozzle, 0.10 layer haight, ironing activated, you have to put 3 pause to change filament.
*** Update 07/19/2024: added divider *** This shelf for the wireless charging cubbyhole is designed for a Chevy Bolt EUV and hopefully will fit other models as well. I've printed in PLA but would recommend using PETG, ABS. or other…
This is a Starter extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The starter Drive Gear is a remix of the original. The electric wires connected to the solenoid are factice. The electric wires connected…
This is Main Pulley extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk blue and silk silver Print…
Easy to print Tuning Chassis for the Carrera 1:32 Chevrolet Bel Air. You will need some Slot.it Parts to make this Chassis running: ( German description ) Leitkiel (z.B. Frankenslot f. Slot.it Models oder Slot.it "SICH07") 2x…
![94-04 3rd Door Handle for Chevy S10/GMC Sonoma Extend Cab [Handle Only]](https://media.printables.com/media/prints/222498/images/2035579_b4df1ecf-e043-47cd-ab54-777467923c9f/print-measurements.png)
