Counting matching models…
I made this because I wanted a sturdy case which would fit a larger battery underneath the pcb. This is only the left half. You'll likely want both. To get the right half simply mirror the case/cover in your slicer. You'll need 5 M2 heat…
I needed to reprint my beekeeb case after a screw stripped out and didn't see the files anywhere. They were nice enough to email me the STLs so I thought I would share. Not the most rigid of cases and I plan to design one from the ground…
This is a remix of an excellent model to use M3 nuts and bolts instead of M2 heatset inserts. You will need three M3x10mm bolt. I had one brand of bolts that fit, but another didn't, so I don't guarantee that all M3 bolt heads will fit. I…
Hello, This is my first case/ first 3d model I created. I bought a chocofi a while back and was disappointed in the cases available. I wanted something a little more of a case than a cover but keeping the height as low as possible. The…
I created a 20º tenting platform for the Chocofi split keyboard. It's designed to fit the Chocofi case you can find here: https://github.com/pashutk/chocofi To print the other side, just mirror the model horizontally. I haven't figured…
After trying other models designed for the Corne keyboard, I felt like they weren't fitting the Chocofi as well as I hoped. So I decided to design my own 😄 I used the Chocofi case v1 as reference to design this: And then used my own…
Want to travel with your chocofi? Scared of accidental keypresses while the keyboard is in your backpack? Fear no more! With the separator you can easily stack both halves of your keyboard on top of one another without any keys being…
Differences: Made various cutouts larger to make access to reset button/power switches easier. Added a slight cutout along the inner walls to keep keycaps from scraping against them. Made the body slightly deeper (2mm) as well as removed…
Chonkier fork with space for bigger batteries, 10x10x2mm magnets and 12 degree tent
Printed with Prusa MK4 Infill 15% Top and Bottom layer with hilbert curve (not required) PLA or PLA+ (but should work with every other material) Supports for drill holes are recommended
Printed with Prusa MK4 Infill 15% Top and Bottom layer with hilbert curve (not required) PLA or PLA+ (but should work with every other material) Supports for drill holes are recommended
This is designed for the Beekeeb Chocofi or hot-swap variants of the amazing Chocofi . I made this to solve a few problems: Makes space for a bigger battery (I need this to run the trackpoint module on my keyboard). I am using this 750mAh…
A minimal stand for the Chocofi split keyboard, designed specifically for builds that use only an acrylic (or similar) plate as the bottom . This will not work if your Chocofi has a full case — it’s made to hug the plate + feet only. For…
A simple travel case that fits chocofi (keyboard). Snug fit… just add some rubber band and your chocofi is safe!
