15,713 models
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Christmas tree with stars with separated LED tea light holder trunk. 2 stl are provided for the trees : one for vase mode and one for normal mode printing. The vase mode is easier and faster to print (on the right on the pictures -…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Print approx. €10.74–€13.13 excl. taxPreliminary estimate for one variant
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This is a design I made for this holiday season. It's a low poly Christmas tree-topper/torture test:P Print instructions I would recommend cutting a bit of the base in the slic3r (depends on the slic3r settings) so that there are three…
Print approx. €9.57–€11.70 excl. taxPreliminary estimate for one variant
Simple Christmas decoration. Must be printed in vase mode (or spiralize) to be empty (and lightweight). Just remove the base layers to insert it on top of the Chrismas tree. If you like this model and you're looking for other Christmas…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
Frohe Ostern Schriftzug
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for one variant
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Print approx. €18.45–€22.55 excl. taxPreliminary estimate for one variant
christmas Snowflake size 150x170x5mm Print instructions printed on Prusa MK3 material PLA detail 0,2mm
Print approx. €3.94–€4.81 excl. taxPreliminary estimate for one variant
This light-weight design fits snuggly onto the top branch of a Christmas tree. The diameter is 9 mm, but the design scales well. Merry Christmas! :) Printing: There are no difficult overhang angles, but due to the small first layer, the…
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant
This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
An easy to print geometrical design of a cute and cozy Christmas tree. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Christmas bell with heart ,print in place. Without supports, it can be printed even without a collar, the heart bridge from the outside can be printed without problems Printed from Prusament PLA Blend Viva La Bronze:…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Very easy to print. Insert the printed trees into the holes. No glue needed. Merry Christmas 🙂 Layer Height: 0.2 Infill: 10% - 20% Supports: No Filament: White PLA or PETG https://makerworld.com/en/models/662696
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Here's an elegant, quick print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs less than 11g! I'll be publishing a new ornament every day!…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I've provided my PrusaSlicer 3MF file and GCODE for Prusa MK3S+ at 100%. It provides a nice balance of print quality, speed and weight. If you want even better quality, you may want to increase the supports or use 2 perimeters everywhere.…
Print approx. €4.19–€5.13 excl. taxPreliminary estimate for one variant
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. Might need to be scaled slightly to fit smaller buildplates. If anyone has any questions please contact me, THop3D
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
I have added color to Vlado Turek 's Chrismas ornament in order to print it on my MK3S/MMU2 using PLA: “Yellow-Green”, Red, White, Yellow and Black.
Print approx. €10.20–€12.47 excl. taxPreliminary estimate for one variant
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
After a year, Christmas is coming again, so I made a new Christmas bell pattern to decorate your Christmas tree. The bell also has a heart, it is printed print-in-place. You can also scale it Christmas bells collection :…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
I design a christmass decoration for the tree of sewing addicts
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
This is a small remix of Flexi Rex , adding a loop and the Clip on Holiday Hat . 2-3mm satin ribbon (available at craft/hobby shops) is best for the making loops to attach these to a tree. Wire ties (the type that bind new cables) is OK,…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
On my MK3S-MMU2 at the 0.15 layer height the print takes some 20hrs to complete. I have printed in PLA, using White, Red and Galaxy Black.
Print approx. €15.03–€18.37 excl. taxPreliminary estimate for one variant
A couple of small ornaments to decorate the Christmas tree vol.2 Other decorations: https://www.printables.com/cs/model/93356-christmas-decorations
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Thank you PhilippHee for the tree for this project. https://www.printables.com/model/91255-christmas-tree-windowdoor-sign-2 I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The base…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
This is Oogie Boogie ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
this model is the dino from the no wifi game from google i original made it i suggest to print it in slower speed for the links it is a fun toy to play with or to give to sombody as a gift or for fun
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
It's a pastry cutter. It's very simple. Height is 6.5 cm, width 6.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
Here's an ornament for your Christmas tree, to commemorate the birth of Jesus Christ. JOY is written in the Asul font, with a nativity scene in place of the O.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!). This is an alternative of my taller hanger with 2 screw holes. The picture shows the various…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Chromecast remote control case / extender
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for PETGSource material: PET
Beschreibung Dieser praktische runde Stiftehalter ist perfekt für Schreibtisch oder Werkbank und sorgt dafür, dass Stifte, Marker oder andere Schreibutensilien ordentlich aufbewahrt werden. Der Stiftehalter ist 96 mm hoch und hat einen…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
Normally Id avoid uploading a design ive changed so much at all let alone as a remix but with the satin sheet, MK4 quality and decals I wanted to share it for other people to have the same success. Altered the design a little to look a…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
HISTORY HERNHUTTERS The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection.If you have suggestions for a new design - shapes, ideas, write them down, I will create a new bell Christmas…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Dwight Schrute Buisness Card Holder : Touch Up. But the bottom of the glasses still need to be thicker.
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
Another Christmas bell, with a new pattern, I hope you choose from the Christmas bell collection . I started to enjoy designing them, maybe there will be more with the upcoming Christmas Collection:…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Easy to print Christmas decoration. You can use it as a napkin ring (scaled down to around 60%) or as a round table decoration. If you want you can even hang it on as a Christmas tree ornament also.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Set of Christmas decorations. The set consists of ornaments in the shape of carp, angel, tree, cross, comet and bell. The individual decorations can be decomposed into a 3D shape and then look really good on the Christmas tree.
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
Christ Figure Plaque / Pendant
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
History Hernhutters The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is one of the easiest of my models to print. You will need supports. Use grid supports on build plate only. An overhang angle of 40 degrees works very well. The loop at the top prints very well without supports. I recommend adding a…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Special napkin holder for the holiday season. Customizable with name and event. Print instructions After printing both parts, just fit and glue one into another.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
Schonbacken für meinen Heuer Schraubstock mit 120mm Backen. Dieses Modell kommt ohne Magnete aus, da es von der Seite aufgeschoben wird und mit dem oberen und unteren Steg absolut fest sitzt. Ideal zum Klemmen lackierter Teile. Die Backen…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for PETGSource material: PET
It had been requested that a model without the “supports” be uploaded. Grimlock_3D said he did, but I could not ever find it. So…, using NetFabb 2023, I removed them, and put the results here. I tried to print the file Grimlock_3D had,…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Candy bowl. Christmas tree shape
Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
Frohe Ostern Schriftzug Buchstabenfarbe frei wählbar.
Print approx. €8.24–€10.07 excl. taxPreliminary estimate for one variant
Wenn mal wieder ein Rotorblatt abgebrochen ist, gibt es hiermit für den Playmobil 71195 Feuerwehrhubschrauber ein Ersatzteil. Profil ist an ein NACA0024 angelehnt, mit viel Infill drucken sonst ist der Übergang von Nabe zu Rotorblatt zu…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
Motivation: I saw many bulky clips for whiteboard markers and chose to design something more visually appealing. Features: Vertical and horizontal storage is possible Neodymium magnets Ø10x3 mm or smaller magnets or M4 screws can be used…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
Nozzle: 0.4mm Layer: 0.12-0.2 (Recommended) Supports needed
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection. Christmas bells collection : https://www.printables.com/@ThorinOakenshield/collections/1878739
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Easy -to-print MERRY CHRISTMAS BALL to decorate your christmas tree or hang from a door handle. NEW The STEP file is available for download in File section! Enjoy and upload your remixes. If you need to print just some specific parts or…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Needed a few more Gutter Hocks / Clips to support strings of Christmas lights. Design is a copy of what seems to be the UK standard clip for most cheap name brand Christmas light strings. Printed in white PETG PLA should also work fine…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Die Lochschablone hat einen Abstand von 32 mm und einen Bohrungsdurchmesser von 5 mm . Zusätzlich werden 4 Kugellager 625 benötigt. This Shelf Pin Jig has a spacing of 32 mm and a bore diameter of 5 mm. Additionally, 4 ball bearings 625…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €9.14–€11.17 excl. taxPreliminary estimate for PETGSource material: PET
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell cookie hat moon ornament snowflake star tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for PETGSource material: PET
This is technically one of my “Swoop” designs, but it looks like diamonds to me (or the Eye or Sauron, you pick). It's the last ornament in this series. I have many other series left to publish. I plan to publish one Christmas ornament a…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
The (Almost) Mathematical Perfect Christmas Tree – Now in 3D Print! 🎄 If you thought perfect geometry and festive aesthetics don’t belong together, prepare yourself: this Christmas tree is engineered so precisely that even Pythagoras…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Christmas tree designed to hold/insert a led candle light (ø37 mm). It can be printed in vase mode. Also there is a little star to put on top.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
My 7 years old daughter designed and print her first model using Thinkercad this weekend. She wanted a stand for when sh
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
Ist aus dem spiel was sie auf Chrom offline spielen können.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
