Liczymy pasujące modele…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Print each part, see print instructions. Cut away the wall from the beard with a knife. Assemble the parts and then use a hair dryer/hot air gun to slowly heat up the beard while you use a hand to form it (use lowest setting). It's also…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
It's time for the first Christmas decorations of the year. With this mini Christmas tree for the shelf, windowsill or desk, the first Christmas spirit will come. The tree with its base plate fits exactly over an LED tea light, so that it…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Completely print in place. No breaking it loose, no supports. Added a tree with a star and an ornament tree Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) Scale it as you like :) Legs from the famous Zou Ghost model by Tower of Creation!…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Christmas tree with stars with separated LED tea light holder trunk. 2 stl are provided for the trees : one for vase mode and one for normal mode printing. The vase mode is easier and faster to print (on the right on the pictures -…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This is a design I made for this holiday season. It's a low poly Christmas tree-topper/torture test:P Print instructions I would recommend cutting a bit of the base in the slic3r (depends on the slic3r settings) so that there are three…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena jednego wariantu
Simple Christmas decoration. Must be printed in vase mode (or spiralize) to be empty (and lightweight). Just remove the base layers to insert it on top of the Chrismas tree. If you like this model and you're looking for other Christmas…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Cookie cutter for Christmas gingerbreads. Snowflake is raised by 4-5mm depending on your scaling to be “printed” on top of the glove. Update 11/12/2022 I uploaded another model with slightly increased height of the snowflake. Use…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Frohe Ostern Schriftzug
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Wydruk około 18,45 €–22,55 € nettoWstępna wycena jednego wariantu
christmas Snowflake size 150x170x5mm Print instructions printed on Prusa MK3 material PLA detail 0,2mm
Wydruk około 3,94 €–4,81 € nettoWstępna wycena jednego wariantu
This light-weight design fits snuggly onto the top branch of a Christmas tree. The diameter is 9 mm, but the design scales well. Merry Christmas! :) Printing: There are no difficult overhang angles, but due to the small first layer, the…
Wydruk około 6,88 €–8,41 € nettoWstępna wycena jednego wariantu
This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
An easy to print geometrical design of a cute and cozy Christmas tree. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
Christmas bell with heart ,print in place. Without supports, it can be printed even without a collar, the heart bridge from the outside can be printed without problems Printed from Prusament PLA Blend Viva La Bronze:…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very easy to print. Insert the printed trees into the holes. No glue needed. Merry Christmas 🙂 Layer Height: 0.2 Infill: 10% - 20% Supports: No Filament: White PLA or PETG https://makerworld.com/en/models/662696
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Here's an elegant, quick print for the tree. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs less than 11g! I'll be publishing a new ornament every day!…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Cats natalizio
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
I've provided my PrusaSlicer 3MF file and GCODE for Prusa MK3S+ at 100%. It provides a nice balance of print quality, speed and weight. If you want even better quality, you may want to increase the supports or use 2 perimeters everywhere.…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
English : Printed with the readable side laying on the print bed, in order to benefit from the good looking textured PEI sheet. Deutsch : Gedruckt mit der lesbaren Seite auf dem Druckbett liegend, um von dem gut aussehenden, texturierten…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
8cm cookie cutter and Stamp of Gingerbread Man / Person, Can be printed together to save on space on your print bed or seperated.
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
After a year, Christmas is coming again, so I made a new Christmas bell pattern to decorate your Christmas tree. The bell also has a heart, it is printed print-in-place. You can also scale it Christmas bells collection :…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
I design a christmass decoration for the tree of sewing addicts
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
This is a small remix of Flexi Rex , adding a loop and the Clip on Holiday Hat . 2-3mm satin ribbon (available at craft/hobby shops) is best for the making loops to attach these to a tree. Wire ties (the type that bind new cables) is OK,…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
A couple of small ornaments to decorate the Christmas tree vol.2 Other decorations: https://www.printables.com/cs/model/93356-christmas-decorations
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Thank you PhilippHee for the tree for this project. https://www.printables.com/model/91255-christmas-tree-windowdoor-sign-2 I took this design, shrunk it down, and added a tab on the bottom so it could be used as a napkin holder. The base…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Yes, you need supports. Use paint-on supports to create flying buttresses that not only keep the icicles adhered to the bed, they keep the tiny arms of the icicles from breaking. I've provided a screenshot of how they should look. I've…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Expressive creeper figurine with a Christmas hat. There is a version with a light cubic texture and without. A simple, cute figurine for decorating your workspace.
Wydruk około 8,08 €–9,88 € nettoWstępna wycena jednego wariantu
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
This is Oogie Boogie ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
Snowflake
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
Wydruk około 3,98 €–4,87 € nettoWstępna wycena jednego wariantu
Christmas ball for hiding surprises. Diameter 80 mm. The model is designed so that the individual halves are held together by a simple thread. I print threaded on a backing with supports, but it is possible to print the other way around.
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
Here's an ornament for your Christmas tree, to commemorate the birth of Jesus Christ. JOY is written in the Asul font, with a nativity scene in place of the O.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!). This is an alternative of my taller hanger with 2 screw holes. The picture shows the various…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Normally Id avoid uploading a design ive changed so much at all let alone as a remix but with the satin sheet, MK4 quality and decals I wanted to share it for other people to have the same success. Altered the design a little to look a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HISTORY HERNHUTTERS The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Immerse yourself in the festive spirit with our exquisite 3D model of Christmas doves, a perfect addition to your holiday decor or as a unique gift for loved ones. This elegant design is ideal for adorning your Christmas trees or for…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection.If you have suggestions for a new design - shapes, ideas, write them down, I will create a new bell Christmas…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Another Christmas bell, with a new pattern, I hope you choose from the Christmas bell collection . I started to enjoy designing them, maybe there will be more with the upcoming Christmas Collection:…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Easy to print Christmas decoration. You can use it as a napkin ring (scaled down to around 60%) or as a round table decoration. If you want you can even hang it on as a Christmas tree ornament also.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caketopper "Frohe Weihnachten" für Kuchen oder Torten zu Weihnachten als schöne Dekoration. Caketopper "Frohe Weihnachten" for cakes or tarts for Christmas as a nice decoration.
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Set of Christmas decorations. The set consists of ornaments in the shape of carp, angel, tree, cross, comet and bell. The individual decorations can be decomposed into a 3D shape and then look really good on the Christmas tree.
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
Christ Figure Plaque / Pendant
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
History Hernhutters The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This is one of the easiest of my models to print. You will need supports. Use grid supports on build plate only. An overhang angle of 40 degrees works very well. The loop at the top prints very well without supports. I recommend adding a…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
Special napkin holder for the holiday season. Customizable with name and event. Print instructions After printing both parts, just fit and glue one into another.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Schonbacken für meinen Heuer Schraubstock mit 120mm Backen. Dieses Modell kommt ohne Magnete aus, da es von der Seite aufgeschoben wird und mit dem oberen und unteren Steg absolut fest sitzt. Ideal zum Klemmen lackierter Teile. Die Backen…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It had been requested that a model without the “supports” be uploaded. Grimlock_3D said he did, but I could not ever find it. So…, using NetFabb 2023, I removed them, and put the results here. I tried to print the file Grimlock_3D had,…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Candy bowl. Christmas tree shape
Wydruk około 5,52 €–6,75 € nettoWstępna wycena jednego wariantu
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena jednego wariantu
Frohe Ostern Schriftzug Buchstabenfarbe frei wählbar.
Wydruk około 8,24 €–10,07 € nettoWstępna wycena jednego wariantu
Wenn mal wieder ein Rotorblatt abgebrochen ist, gibt es hiermit für den Playmobil 71195 Feuerwehrhubschrauber ein Ersatzteil. Profil ist an ein NACA0024 angelehnt, mit viel Infill drucken sonst ist der Übergang von Nabe zu Rotorblatt zu…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
After printing drill the 3,5 mm hole complety through the scrw, then cut of the flange (which is necessary for printing) and shorten to approx. 22mm.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nozzle: 0.4mm Layer: 0.12-0.2 (Recommended) Supports needed
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection. Christmas bells collection : https://www.printables.com/@ThorinOakenshield/collections/1878739
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Easy -to-print MERRY CHRISTMAS BALL to decorate your christmas tree or hang from a door handle. NEW The STEP file is available for download in File section! Enjoy and upload your remixes. If you need to print just some specific parts or…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a few more Gutter Hocks / Clips to support strings of Christmas lights. Design is a copy of what seems to be the UK standard clip for most cheap name brand Christmas light strings. Printed in white PETG PLA should also work fine…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die Lochschablone hat einen Abstand von 32 mm und einen Bohrungsdurchmesser von 5 mm . Zusätzlich werden 4 Kugellager 625 benötigt. This Shelf Pin Jig has a spacing of 32 mm and a bore diameter of 5 mm. Additionally, 4 ball bearings 625…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 9,14 €–11,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell cookie hat moon ornament snowflake star tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…
Wydruk około 6,29 €–7,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is technically one of my “Swoop” designs, but it looks like diamonds to me (or the Eye or Sauron, you pick). It's the last ornament in this series. I have many other series left to publish. I plan to publish one Christmas ornament a…
Wydruk około 4,37 €–5,34 € nettoWstępna wycena jednego wariantu
The (Almost) Mathematical Perfect Christmas Tree – Now in 3D Print! 🎄 If you thought perfect geometry and festive aesthetics don’t belong together, prepare yourself: this Christmas tree is engineered so precisely that even Pythagoras…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
