Counting matching models…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
Hello everyone. I present to you a new superhero figure. It's Invincible. The model is available without supports. You can support me and subscribe to my Instagram 😊 https://www.instagram.com/monster_prey/ You can download other FREE…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt There are 2 different size molds. I print them in PLA 20% infill. The Lid and inside cups should be printed @0.16 mm layer…
The Doom Crucible from Doom Eternal is now in the hands of the Dummy 13.
Hello again! This is invincible's faceshell/mask for cosplay use. Remix from ( https://www.thingiverse.com/thing:4773521 ) If you have any questions or requests, you can comment on this THING. Enjoy:)
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Yellow PLA UltraPLA -White PLA Bambu Basic -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing…
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
fits a standard lightsaber hilt, i made a blade from acrylic to fit mine, could probably print one for it if you wanted. Category: Props
Made in Blender, I separated the battery/radar thing from the back of the helmet so it can be printed separately in a lighter manner otherwise it will weigh down the backside and cause it to lean back. (Might do that anyways)
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
HMS Invincible Aircraft Carrier from World of Warships. Best printed at a length of 180-200mm Infill: 8 Supports: No Walls: 2 This is a stylized model by Subhunter59 and is for free use.
Hi! This is a remix to a model, splitting it into two seperate parts. It's easier to print on smaller machines now (; Please Like and comment if you enjoy (: If you want to split it into objects , go into the objects tab, and click split…
Mini/Lucky/Dummy 13 Crucible (Doom Sword) No supports required I recommend using below 0.2mm layer height but 0.2 is decent too. If you want a cooler surface finish then enable ironing. Use 100% infill for the Mini 13 Version since it's…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! With season 3 episodes coming out now, I went ahead and created a figure of Mark himself! But I decided to leave this one…
Crucible sword from Doom Eternal, pre-cut for ease of printing, pin system has unique key'ing to ensure correct assembly orientation. This revision now has larger spacing for the bottom section of the blade to slot into the hilt and an…
The Crucible is a Paladin-class Corvette which appeared in Star Wars: The Clone Wars. It was an Old Republic-Era ship, used by the Jedi Order to take Jedi Younglings on a journey to construct their own lightsabers. Dimensions Length Width…
Hey James, rushed this one a we bit, but I think it came out pretty good. Do check the sizing suits your needs and post some picks if you do take the challenge on ; ) Cheers Jace
I noticed that the model does not lie properly on the ground and that many filigree supports are necessary. so I realigned it, smoothed it out a bit and extruded the last few millimeters of the model down. my print settings: Rafts - Brim:…
Invincible ISS Vanguard Insert This insert is designed for the ISS Vanguard board game. Although the original game includes a decent insert, I wasn't entirely satisfied with it. First, it doesn't accommodate sleeved cards. Second, the…
I really wanted to make something from Invincible after I binged season 3 and saw that no one had really made and uploaded an accurate version. It's a mix of the two pieces of art (the second of which is in black and white because that's…
This is a remix of the Doom Crucible file uploaded here( https://www.thingiverse.com/thing:3007342 ) by Electronic Chaos. I threw his model into mesh mixer and split it along the vertical axis, then made it solid and cleaned it up a bit.…
Invincible logo with separated letters. So this can be made without using an AMS system.
3D Print your own hulk today!!! Happy Printing! Please enable tree supports!
A head made for normal Dummy 13 figures which represents Mark Grayson AKA *title card* from the hit show *title card*
Some features: Vertical storage Supports premium sleeves (I use Arthur & Excalibur sleeves from Paladin; the width of the sleeves for the minicards must not exceed 48mm). Fast setup The markings in the slots of the deck holder indicate…
Update: Added a cut-up version of the inner dome for easier removal (for 5mm wall thickness). Use this 3d-printed mold to make crucibles from silicon carbide powder and waterglass for metal melting in the microwave. It holds about 110ml.…
The model is significantly shorter than the in-game Crucible (~60-65 in), coming in at ~36 in. I'm just not as big as the Doomslayer. This model is fully 3D-printable and has a threaded handle, but the other parts, like the blade and the…
I've been watching a lot of Invincible so I figured I would try my hand at making an action figure. The pictures are printed with a .2 layer height with cura on an Ender 3 v2. If you have a stronger machine you can go as far in detail as…
Bring fictional character, ‘Invincible’ to life through the 3d printable action figure Dummy 13 with this head. I recommend using a Bambu printer, but any should work. It does work with AMS devices.
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Blue PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from…
Printed from Ultra PLA and PLA by Noctuo and PLA F3D filaments -Black PLA UltraPLA -Blue PLA -Wood Ash PLA Spectrum -Red PLA -Perl Red PLA -White PLA Bambu Basic -Mocha PLA UltraPLA Printed on Bambu Lab P1S and AMS I recommend printing…
Keychains I made for Invincible and all his variants in the Invincible war. Most of these can be made without an mmu, but if you want 3 or more colors then you will have to use an mmu or paint i guess.
Make your lawn invincible with the Invincible Lawn Star! A proper whirligig, it spins in even the gentlest of breezes. It can sit atop a pole made from 1/2-inch PVC or you can hang it from a tree using the convenient hole in the top (use…
I was too unsure with a printed chain when I designed this, so I went with gears. The model in the pictures is still with metal screws, but i updated the files so all of you can have fun with this model and are not meant to search for…
Invincible Iron Man Inspired Helmet Enjoy Category: 3D Printing
this is the invincible title card
Hemovorous the Invincible, the giant Varkid you can encounter on Borderlands 3 is now ready to hop off the screen and terrorize your desk or shelf! Don't print it to big or you might want to have some Vault Hunters at your side to help…
This is Mark Greyson from Invincible after/ during a battle. He is beat and has some scars while fighting. He is flying up from the base which is rebar and concrete bricks printed him at .08 for detail lower body and full body available…
Printed on Bambu P1S using Sunlu PETG filament
I decided to make a book mark for my invincible comic book. I made it in, none other than the invincible font itself.
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black tuquise 12 yellow 14 white 18
A coaster with the logo of the tv show invincible
Application Instructions: Print with PLA or TPU the color of your choice. Place the printed logo on your T-shirt in the desired position. Cover it with parchment paper (baking paper) or a heat-resistant sheet. Use an iron on a medium heat…
This is a convenient tool for helping prepare and store samples for differential scanning calorimetry (DSC). The DSC crucible holder is designed to hold up to 35 pans that are 40 µL in volume and the lid closes with a satisfying “click”…
I would sometimes bump the charge marker on the homeworld, so I made the little tray to hold it in place, similar to the knight / hero boards. The card slides right in easily. Compatible with: Astro Knights Astro Knights Eternity…
My attempt at the Crucible Cruiser from Clone Wars including stand. Armada Scale Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 200 Infill: 20 **Filament:** PolyMaker PLA Category:…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 13 brown 14 white 24
Added numbers to ease the identification of individual samples in the holder designed by Klein. Readability of the numbers can be improved by a color change. The lid by Klein remains unchanged.
Invincible The Card Game came with a pretty garbage insert that doesn't hold the cards well and can't fit the official sleeves, so I made a very simple one with almost the same dimensions as the one in Astro Knights and Astro Knights…
A small washer is glued for better up standing. Une rondelle est collée (superglue) pour améliorer l'équilibre.
Additional information on this system and characterization can be found here : https://doi.org/10.1039/D4RE00081A Modifiable files can be found here: https://github.com/Noel-Research-Group/3D-printed_UFO_Reactors The reactor is designed…
Invincible (show) Lithophanes
Crucible of water for the ROBO2023 robot competition.
Cible à poser ou accrocher pour Nerf ou autre.
Additional information on this system and characterization can be found here : https://doi.org/10.1039/D4RE00081A Modifiable files can be found here: https://github.com/Noel-Research-Group/3D-printed_UFO_Reactors The reactor is designed…
This is a convenient tool for helping prepare and store samples for differential scanning calorimetry (DSC). The DSC crucible holder is designed to hold up to 35 pans that are 40 µL in volume and the lid closes with a satisfying “click”…
lithophanes i made
I will add more info as I tinker with this.
Cible de calibration pour régler en X et Y les 2 têtes d'une imprimante dual extrudeur type Tenlog Print Settings Printer: Tenlog TL-D3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 25% Filament: Ice PLA Black, White
Created and shared in OnShape This is a replacement strainer (screen, filter, etc.) for an Invincible Marine 800 GPH Bilge pump with float switch . It probably also fits many other brands. There are two versions. One is just the strainer…
Inspired by @ShakeTheFutur_300416, I tried out his version but it didn't work for me: https://www.printables.com/model/458620-silicon-carbide-crucible-mold Instead, this one uses a flat bottom (no punt) 750ml wine bottle cut 100mm tall.…
-Created by using the relief sculpture maker on makerworld -A higher infill can increase the print quality -If you set a single colour change at the height 2.80 mm the background is different colour to omniman so looks better
C'est une cible de tir de type gong que j'ai réalisé sur Fusion 360. L'ensemble permet d'avoir jusqu'à 5 cibles. Lorsque les cibles sont frappées, elles bougent sur l'axe. Il y a 2 types de cibles différentes ; une petite et une grande.…
invincible fullmask mark
Just a cool scout woggle, print and wear
Print without vase mode. Fell free to leave a like. :)
Vous aurez besoin de colle pour plastique pour que le Creeper tienne au socle
Secure container for 70 uL alumina crucibles (6mm OD) used for DSC TGA as well as angled tweezers to transfer them.
A simple model of the logo of the Coalition of Planets from the show and comic book series "Invincible"
This is a statue of invincible or Mark from “Invincible” is has two models one multicolor and one singlecolor.
mark I made a steak...
the artist is Ryan Ottley. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176x220mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
This is a replica of Monster Girl's new belt from season 3 of the show "Invincible." SPOILERS. In the show Invincible 3x6, Robot/Rudy/Rex finished creating this belt for Monster Girl/Amanda. Amanda has the ability to transform herself…
This is a sample carrier for 6x3 DSC crucibles (designed for Netzsch Concavus 30/40 microliter, which are 5mm diameter). It requires two 5x2 mm disk magnets. There is some space to put in labels (e.g. sample name and weight). Based on…
Suite à une chute de la cible de fléchettes Crivit de chez Lidl, j'ai recherché le modèle des pieds sur les différents sites, ceux-ci étaient introuvables. J'ai donc redessiné les pieds. Matière utilisée: ABS.
Unleash the power of heroic storytelling with this stunning 3D printable STL figurine that captures raw strength and determination in every detail. This dynamic statue showcases incredible muscular definition and an action-packed pose…
Use this to show off your invincible compendium books with awesomeness, I will post a real picture of usage with the book and this, I made this in blender for my first ever make on printables
This 3D-printed pickup height hooking gauge is a practical workshop tool for passive P-Basses (split-coil pickups), designed to set reproducible pickup height starting points without using calipers. It is not a “perfect setup” and not…
The Invincible Ring is a sleek, detailed design inspired by Invincible's iconic look, translating the character's recognizable aesthetic into a functional 3D-printable ring. Designed with accessibility and customization in mind, the ring…
bonjour j'aime la 3D mai bon jai fait un porte cible le plus réduit en fils en 140*140 il vous faut juste une gros boite a pater a chien et le tour est jouer pour ma pare je les faite avec remplissage 30% avec support
This design adds the ability to carry multiple quads safely on the front of most camera backpacks which have light stand mounts on the front. Use any 15x200mm and 15x250mm lipo straps to fasten the mount to backpack and to attach drones…
A crucible with stand is a laboratory apparatus used for heating substances to high temperatures. The crucible is typically made of heat-resistant ceramic or metal, designed to withstand direct flame without breaking or reacting with its…
Suite à une chute de la cible de fléchettes Crivit de chez Lidl, j'ai recherché le modèle des pieds sur les différents sites, ceux-ci étaient introuvables. J'ai donc redessiné les pieds. Matière utilisée: ABS.
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
This design adds the ability to carry multiple quads safely on the front of most camera backpacks which have light stand mounts on the front. Use any 15x200mm and 15x250mm lipo straps to fasten the mount to backpack and to attach drones…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
