Counting matching models…
Dies ist ein Standfuß für den HP T640 Thin Client. Der Fuß kann entweder aufgeclippt werden oder mit M2x8mm zusätzlich geschraubt werden. Gedruckt habe ich in in PETG, für mehr Flexibilität. PLA sollte auch gehen. Bitte auf die…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…
I bought a used HP Thin Client T630 where the stand was missing. Since the stand is important for the passive ventilation, I designed this one myself. As with the original stand, it can be mounted for horizontal or vertical position. It…
Wall bracket for mounting a HP Thin Client. It fits my T620, but I guess it fits more models. See drawing for mounting measurements. Use the screws from the original stand. You can print without support @ 15% infill.
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
Simple bracket for hanging a FUJITSU FUTRO S940 thin client on the wall. Additionally, only 3x 4mm at least 50mm long countersunk screws and corresponding dowels are required. Ensure alignment on the print bed so that the upper hook can…
🧾 Bill of Materials : MAIN PARTS Front panel (1x) Hex panel (2x) Column Support Middle (2x) Column Support End (2x) OPTIONAL PARTS additional Extra Column Supports Long Dowel Short Dowel 🖨 Printing Tips and Recommendations : Material:…
Podstawka do miniPC, HP T630 Thin Client. - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
Simple stand for the HP T620 Thin Client. The file is orientataed correctly, don't try to change orientation. There are upsupported overhangs for bolt heads if flipped. It will print just fine without supports in current orientation. This…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
Stand for the HP T520 Thin Client. May also fit similar HP Thin Clients, but cannot guarentee (confirmed, does NOT fit T620). Secures with 2 M2.5 x 16mm bolts. Thanks to Lars Brockmann for letting me know this part does NOT fit the HP…
I wanted a way to hang a HP Thin client off the back of a monitor. I stated with a basic VESA mount I found here . From there I added some material and sliding dovetail connector. It has mounting holes spaced at 100mm & 75mm. Print…
Once I built my Ikea Lack enclosure for Ender 3v2 I read about Octoprint and decided to have one. It was cheaper to buy used thin client computer than to invest in Pi (with worse specs). So that model allows you to mount HP t520 under…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
This is a vented top lid for the HP T740 thin client, it is affixed with magnets to the metal underframe, this mod allows for better airflow. This machine can get very warm when higher power draw expansion cards are installed or rack…
You are doing me a big favor by clicking the Like button :-) Because not everyone has a fixed IP number and you still want connect your own network, you need a DDNS service and a client. I use https://github.com/ayushsharma82/EasyDDNS on…
Mount used to attach an Fujitsu S740 Thinclient to an Ikea Skadis board. The depth of the inside of the Bracket is 37mm, hight is 47mm. — Printing Details — Printed on Bambu Lab X1C Regular PLA 15% Infill — Changelog — 07.06.2023 - Upload…
Der Fuß passt an einen HP ThinClient T630 und kann mit zwei M2 Schrauben von unten zusätzlich fixiert werden Zusätzlich kann der Fuß auf dem Regal festgeschraubt werden, muss aber nicht. The base fits an HP ThinClient T630 and can be…
Halter für den Dell Wyse 5070 thinclient zum Unterschrauben. Klemmelemente halten den thinclient in Position, sodass er sich in keiner Richtung bewegen kann. Es gibt zwei Versionen, ich habe die geschlossene Variante gedruckt, wer…
Had a bunch of Wyse thin clients sitting on the floor and needed to get them up and out of the way. Could I have purchased something to accomplish this? Why yes, yes I could. However, I decided to throw something together and print these…
My HP T620 has a 4 core cpu GX-415GA, 4 GB RAM and 8 GB SSD. Make shure to get one with its power supply. I am using Open Media Vault V 6 as the operating-system for the NAS. It is based on Debian-Linux and fits on the 8 GB SSD. There is…
This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)
E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…
Base for fujitsu clients. Depth 46mm. External width 96mm Internal width (thin client slot) 52mm With groove for double-sided rubber tape.
low budget NAS/download station stand Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 30% Filament: any PLA Category: Computer
This is a portable WINLINK© client with PAT (a cross-platform Winlink client written in Go). The device is designed for pick up a Raspberry Zero WH Software instruction: see atteched documents Software_Installation_Instruction (GER) Part…
(Thin Client) Case for Raspberry Pi 3 or 4 simple fan inside to keep everything cool held together with 5x3mm Magnets and including a 100x100mm pattern for VESA on the Back/Bottom
First model I've ever made. I used Fusion 360. I've not printed this yet, but will update this listing upon doing so. Print at your own risk, I don't know if it works yet. No G-code is included because I use Anycubic and Printables…
Mounting holes are sized for #8 screws I recommend the following power supply unit (PSU) mounting bracket as a companion print to this thin client bracket. https://www.printables.com/model/77598-customizable-mounting-bracket-f3d…
I have modded the stand here to include a GoPro mount, where i have added a 140 fan since i have 4 of the T630's and airflow troug the systems. It will go out the Left or Right siide. I have included a mount for the 140mm fan i have ended…
I made this model in order to attach an SSD in my LogiLink UA0041B USB enclosure to my Raspberry Pi. Since the Pi's case supports VESA mounting, I made it so that two of these holders could simply be slid onto the enclosure. When spaced…
Ahh... The SunRay1. Beautiful design, but very flawed... Slow and prone to power supply failures. Well, the only part of this that we can fix here is the fact that the plastic stands are rarely included in eBay auctions. They are a…
I picked up a Wyse think client to use as an alternative to a Raspberry Pi for running OctoPrint. Until I was sure I this device would meet my needs, I used only components I already had: a 4 GB SoDIMM to replace the 2 GB unit within, an…
Custom modded part for a client.
Simple Straight forward just print wi 40% infill.I used PLA. The off stands are fixed with tapping screws 2,2x4,5 DIN 7981 against the bottom grid. The SSD directly to the plate with HDD screws.
All file could also be found at https://github.com/tsbogend/3dprints/tree/master/wyse-zx0
Basically everything the same like original except the holes for the screws
I needed something that would allow me to have the thin client horizontally on the desk. This was printed at 0.2mm layer height, but you could go for 0.24mm or more. Remove the existing stand from the base by unscrewing it and then place…
Introducing HelloChop, the client-centric 3D printed chopstick holder designed to elevate your dining experience. Designed with simplicity in mind, HelloChop is easy to clean and features a unique slot that securely props up chopsticks.…
I needed a wall mount for my repurposed Wyse PC that i use as a home assistant server. Maintains access to all the ports at the front and rear including power. No assembly or supports necessary just 4 screws suitable for the wall surface…
Custom 3D-printed rear bracket adapter designed for the HP Thin Client t540. It allows you to cleanly install a secondary RJ45 network port / M.2 / PCIe NIC module into the factory expansion slot cut-out, making it ideal for building a…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
Base for fujitsu clients. Depth 46mm. External width 96mm Internal width (thin client slot) 52mm With groove for double-sided rubber tape.
E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…
Halter für den Dell Wyse 5070 thinclient zum Unterschrauben. Klemmelemente halten den thinclient in Position, sodass er sich in keiner Richtung bewegen kann. Es gibt zwei Versionen, ich habe die geschlossene Variante gedruckt, wer…
Basically everything the same like original except the holes for the screws
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Basically everything the same like original except the holes for the screws
