Counting matching models…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs A glucometer is an essential tool for monitoring a patient's blood glucose levels, making it a must-have in any…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
See My 3D Models See My Website Descarga este modelo 3D de armazón para barrilete o cometa, diseñado para ofrecer una estructura ligera, resistente. Ideal para proyectos DIY, actividades escolares, recreación al aire libre o fabricación…
Overview This model is an alternative mount for the ATX Power Control Board (GL-ATXPC) for the GL.iNet Comet KVM (GL-RM1). The official mount connects to an expansion slot cover and so must fit side-by-side with PCIe expansion cards even…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with bright flame-like head crests and a…
a cover i design to keep water and other things out of a comet bleach container. it does not need supports
Fully ready to play - just 'WIP' as we keep tweaking the rules. Video here! Note: I've included all parts as separate files, but the 'plate' files show you the recommended print orientation 'Hardware' needed: 7x normal d6 dice for each…
I am a type 1 diabetic. This storage box was created for my wife, so that if I have a severe low everything is in one place.
This is ESRack module for GL.iNet Comet Pro (GL-RM10) This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module ESRack system design created by @EvilProphet . Version changes: V2 - Made…
This lamp is easy to assemble… but some things to be aware of: When fitting bow1 and bow2 together and in base, it is a snug fit! Use a deburring tool to carve a bit on the “male” part of the brackets until it slides without too much…
Bowl for the holiday table, Christmas decoration. Print settings 0.2 layer height 2 perimeters 5 solid top layers 3 solid bottom layers 10 % infill (gyroid)
The De Havilland Comet was the world’s first commercial jet airliner, introduced by the British aerospace manufacturer de Havilland in 1952. This revolutionary aircraft featured a sleek, streamlined design with four jet engines embedded…
This is a remixed version of M. Bergman's very nice Comet tank model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it to HO…
Dekorace ' Vánoční kometa' svítící led světlo. Decoration 'Christmas comet' shining led light.
Print both parts and glue them together. Add a metal ear hook.
Print PETG_ 0,4n 0,2mm structural Print PLA 0,25 mm structural I fixed this holder with superglue.
I uploaded this model originally to the Toybox Store. This is the same model. When attaching the holder to the rod: Remove the rod from the printer Insert the holder with the front pocket over the bend front end of the metal rod and the…
A 3D print-optimized version of my Comet Cutter utility knife, the Comet Cutter Lite is the perfect quick and easy solution to the problem of never having a knife on hand when you need one. The blade locks in both the open and closed…
Comet Antenna CTC-50M is flat ribbon coax cable for thru window opening connections to an exterior antenna Better Mounting Bracket for Comet Antenna CTC-50M coax thru-wall connector fits onto one end of a threaded 3/4" gray irrigation…
Made this, like, in 2022 but since it was just a private request, I put off on releasing it to the world. In the meantime I also forgot to share the files too many times than I am confident talking about, but now they're here. Enjoy
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
Here are the cosmetic changes: Front Cover: Just make it look a lil bit cooler in my opinion Front Slider: Increase the length of grip area and delete the holes in the middle of the model Back Slider: Redesign to look like a more…
See My 3D Models See My Website Descarga este modelo 3D de armazón para barrilete o cometa, diseñado para ofrecer una estructura ligera, resistente. Ideal para proyectos DIY, actividades escolares, recreación al aire libre o fabricación…
Overview This model is an alternative mount for the ATX Power Control Board (GL-ATXPC) for the GL.iNet Comet KVM (GL-RM1). The official mount connects to an expansion slot cover and so must fit side-by-side with PCIe expansion cards even…
🤖 Comet Crawler – A DIY Walking Robot Designed by Jorvon Moss (aka Odd-Jayy) , the V1 Comet Crawler is a fun and approachable introduction to walking robotics. Inspired by the Kame robot, this design focuses on simplicity, affordability,…
You can find the replacement for a ski boot sole for a HEAD Junior C boot. I needed a replacement for the next day and a friend (z84) basically said “hey, I'll just do it for you. measure it for me and we'll do it together online”. well,…
Mouting bracket that can be used to mount the Comet PoE on your desk or on a wall. The bracket allows access to all ports, even power over usb Type C if you dont have a PoE setup (yet) like myself. The Comet PoE is held in the bracket by…
This 3D printed comet star is a perfect addition to your Christmas Nativity scene . It represents the Star of Bethlehem , guiding the shepherds and wise men to the birthplace of Jesus. The model is lightweight, easy to print, and can be…
Wall mount for GL iNet KVM Comet (GL-RM1). Do you like my models? Consider buying me a coffee .
Wall mount for GL iNet KVM Comet POE (GL-RM1PE). Do you like my models? Consider buying me a coffee .
Years ago (2021) i've assembled parts from Tomalinski's model of Captain Future's COMET spaceship, using also parts done by Maxxit (engine), to have something simplier to print with resin printer With this V2, still using Tomamlinski and…
So if you ever saw the show "Its Always Sunny in Philadelphia" you'll remember the iconic episode "The Nightman Cometh ". Well, I got crazy and made 3D Printable D&D minis of The Gang in this plays' garb lol Thanks to my friends and…
Double hydrometer or alcometer holders for multiboard. Each slot has an embedded stainless steel washer near the bottom and another stainless steel washer (glued in place). Pause at layer 15 to add the washer Washer size: 25mm Diameter…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone…
Uncork a universe of magic with this unique black-and-white accessory. The design features a bottle releasing a stream of comets, stars, and galaxies into deep space, while resting on a floating asteroid. A large moon and distant…
A modern, minimalist Nativity designed as a single solid object for easy, reliable printing. This version features the Holy Family with the ox and donkey , unified by a comet-star structure where the star’s tail becomes the main support…
comet 0.4 nozzle first layer height 0.2mm layer height 0.2mm infill grid 15% suports no
Print both parts and glue them together. Add a metal ear hook.
GL.iNet were amazing and provided rack mount stl files for their new Comet pro KVM, but the file is in one piece an not able to be printed on most home printers, including my H2D. I broke this up so that it could be printed in multiple…
GL.iNet has provided a rack mount stl file for their Comet PoE KVM, but the file is in one piece an not able to be printed on most home printers, including my H2D. I broke this up so that it could be printed in multiple pieces and…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with bright flame-like head crests and a…
This is a 10" rack panel designed to hold a GL.iNET Comet remote KVM. There are two keystone jack sockets to bring the power and network connections to the front of the panel. This model does require support on the tray that holds the…
NUC version - some NUC higher than 1U and i dont want to create specific shelf for every of it, so i make this type to fix it by make more space under keystone (14.5mm) can mount on both side no support need (need cleanup spaghetti a…
GL.iNet has a one unit version out for a 10-inch rack, but it has horizontal venting and requires supports. I wanted to create a version using their cool hexagonal-style venting that requires no supports to print. Printed on a Bambu X1C.
a cover i design to keep water and other things out of a comet bleach container. it does not need supports
Fully ready to play - just 'WIP' as we keep tweaking the rules. Video here! Note: I've included all parts as separate files, but the 'plate' files show you the recommended print orientation 'Hardware' needed: 7x normal d6 dice for each…
I am a type 1 diabetic. This storage box was created for my wife, so that if I have a severe low everything is in one place.
I lost the box of mounts for my lights so I had to make these for my other bike, There is a part for the handlebars and the saddle. The model is a fairly challenging print, it has to be precise for the snap-fit to work, and dense so it…
This is ESRack module for GL.iNet Comet Pro (GL-RM10) This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module ESRack system design created by @EvilProphet . Version changes: V2 - Made…
An Amiibo stand inspired by the design of the Comet Observatory Library. Specifically designed for the large “Super Mario Galaxy / Rosalina" Amiibo.
An Amiibo stand inspired by the design of the Comet Observatory Library. Specifically designed for the large “Super Mario Galaxy / Rosalina" Amiibo.
Since the original files are buried behind a small link at the very bottom of their website, I made them available here. You can find them at the "Tools & Downloadables" section here: https://www.gl-inet.com/products/gl-rm10/#specs
This is a 3D model of the comet 67P (67P/Churyumov-Gerasimenko) based on the data captured by the Rosetta space craft and published here by the European Space Agency: https://imagearchives.esac.esa.int/index.php?/page/navcam_3d_models…
I have a new glucose meter (Freestyle FreeStyle Optium Neo) So i made another case like the one i did ( https://www.thingiverse.com/thing:2828367 ) I wanted a case for my new glucometer (Freestyle FreeStyle Optium Neo) where i can pick a…
I wanted a case for my glucometer (Freestyle) where i can pick a probe stick place it in the meter, pinch myself and take the sugar measure without opening the box and everything spreading everywhere (specially in the morning) I am not…
Source file from this ESA page: http://blogs.esa.int/rosetta/2014/10/03/measuring-comet-67pc-g/ Inspired by the amazing work by ESA, the Rosetta and Philae spacecraft and probe, and all the people who've worked on them, I wanted to make…
I use this mount for my self build irrigation system. The pump feeds a GARDENA Micro-Drip-System. I designed multiple models supporting a float switch and a connector for an additional water tank. To prevent the mount from floating, i…
Fairly crude but functional replacement part for the saddle mount rear light bracket for a moon comet style bicycle light. Swapped the orientation of the mount so it won't fall out. The original has a lever/tab arrangement which is prone…
Print two of each: Eyepiece cap is the smaller protector for the eye-side of the binoculars Objective cap is for the larger/final lens in the optical train I have added a small 4mm hole for attaching tethers so that THIS time I do not…
Organizer for precision xtra glucometer with additional space for test strips, lancets, alcohol preps and bandaids.
The Modell is great to be printed for Chrismas use 2Part one Mirrored to get a Full Comet Star printed on FDM at 0,4 Nozzle and 0,2 layer use 2walls to get a better outer wall TIP is the outer wall at a maximum of 35mmsec the inner goes…
Cookie cutter in the shape of a Christmas comet Vykrajovátko na perníčky ve tvaru Vánoční komety
Model description The de Havilland DH 106 Comet was the world's first commercial jet airliner. Developed and manufactured by De Havilland at its Hatfield Aerodrome in Hertfordshire, United Kingdom, the Comet 1 prototype first flew in…
Die Comet ist mit einen Standfuß zu haben der eigens von mir designed wurde. Für Modelliebhaber ,Enthusiasten und Scifi Fans.
This is a remix of the original Cateye light (basically just shrunk the dimensions of the mount by enough to fit the small Moon mount. Seems quite secure, printed with a PETG and a 0.6 nozzle on MK3s using the 0.3mm quality setting. (used…
Cosmic dog tag for Comet the dog. Multiple colour, the gcode has the pauses built in. Pretty easy print in general.
Star sky for my kids. Stars, ufo, rocket and comet; Glow in the Night → scaleing is no problem → high is to about 2 mm (after scaling you have to scale high to 2mm)
Imported from https://www.thingiverse.com/thing:2375879 A fidget spinner inspired by comet trails. Uses standard 608ZZ Shielded 8x22x7 bearings. Center bearing should be press-fit, but outer bearings might need a dab of glue. Print…
Replacement part Cap for Williams Comet Table Print Settings Printer: Hypercube Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Jupiter PLA Black Category: Games
Just some fun little comets and planets to add to your glow in the dark stars on the roof. Print in glow in the dark, or be prepared to drop LEDs behind the parts to light them up.
Just a 2D flat star with 1 up to 5 stacking levels and optional comet tail Tail adapts automatically. Some other parameters can be selected, like thickness. It's a quick and dirty OpenScad hack to get some nice stars printed for the…
This adapter connects - Gardena hose connector - Hose with an inner diameter of ø10-11,5mm (in my case hose of Comet submersible pump (Tauchpumpe). Remix This adapter is essentially based on the data of the "Air to Gardena Fitting…
Looks quite 3D from a distance. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA+ IIID Max Night Gray Transmission Distance: 2.5 PLA+…
Picavet para fotografía aérea con cometas (kites, papalotes, barriletes). Material: PETG Enlaces de el tornillo de montaje y el rodamiento. Tornillo de montaje:…
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Español: Se trata de una carcasa protectore para el glucómetro Freestyle Insulink de Abbot que, como su propio nombre indica protege de daños en la medida de lo posible el glucómetro si sufriese algún tipo de golpe por caída o de forma…
Spojení obrázku samolepky a hvězdy vytvořené ve wordu. Hvězda má po přenesení trochu zubaté okraje, ale u výtisku to vypadá zajímavě.
This lamp is easy to assemble… but some things to be aware of: When fitting bow1 and bow2 together and in base, it is a snug fit! Use a deburring tool to carve a bit on the “male” part of the brackets until it slides without too much…
Originally an ornament on the top of a Christmas tree. Connection with the help of skewers.
Diseño de una maneta para una cometa. Además de ello, os recomiendo que lo hagáis con un 30% o 40% de relleno en giroide para una mayor durabilidad, no es necesario el uso de soportes. Mi impresión fue con un 40% de relleno en giroide,…
