Counting matching models…
Commodus Stela (W946) The Commodus Stela (W946) is a fascinating artifact from ancient Egypt. Let’s delve into its details: Description : The Commodus Stela is also known as the Sacred Cow Stela . It commemorates the mother of the Buchis…
Print approx. €5.27–€6.44 excl. taxPreliminary estimate for one variant
25 Common Vegetable Stake Labels Size 135mm X 10mm X 1.2mm LAST layer prints the letters so use a different colour filament on that layer if you wish. The biggest challenge for these as they will be outdoors will be the heat of the sun.…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
20 Common Herb Stake Labels Size 135mm X 10mm X 1.2mm LAST layer prints the letters so use a different colour filament on that layer if you wish. The biggest challenge for these as they will be outdoors will be the heat of the sun. PLA…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
This is a follow up of my previous model for War of the Ring (2nd ed) fast setup insert. With this insert you can store both the Lords of Middle Earth and Warriors of Middle Earth expansions in the Warriors expansion box. It is composed…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
20 Common Herb Stake Labels (Hollow Letters for Single Colour Filament) Size 135mm X 10mm X 1.0mm The biggest challenge for these as they will be outdoors will be the heat of the sun. PLA will melt, bend, twist with sufficient heat. I…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
Size : 7cm x 7cm x 1.1cm The sizes are approximately! Ask us for custom designs! We are located in Buenos Aires, Argentina. We print 3D cutters, topper cake and more! Find us on our Instagram : @argentina3dprintings Web page :…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
A Workshop Stool Design Using Common Pre-cut Lumber (pine) that you can find at Wickes (UK), held together with printed parts. It will require basic woodworking skills, and you will need to make/provide your own design for the seat (the…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
FISH FRESHWATER COMMON RYBA
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Adenovirus are encoded by a single linear, double-stranded DNA genome of ~36,000 basepairs. Adenoviruses most often cause the common cold. The viral particles are naked icosahedral capsids of 70-90 nm in diameter. This viral capsid is…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
A farmer, bar keep, bar maid, and half orc barkeep with a kitty! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
Time to Gridfinitize your pocket change. I arranged the stacks in size (diameter) order which is sure to soothe the OSD in some of you, as opposed to denomination order, which is sure to trigger the OSD in some of you 🫠 The step file is…
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
Hose adapters with a 45deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
This will act as a repository for the parts that are common to my Modular Ammo Boxes. Updated parts will be added here before they are moved to the individual box files, so look here for the latest files. The ammo boxes are now in the…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
Resized for common affordable exacto knifes found in Europe, anywhere from hardware stores to Aldi.
This is a miniature of the Commodore PET, a computer released in 1977 by Commodore that never became mainstream but is an important step in the evolution of microcomputers that in the '70s and '80s started a digital revolution. This model…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Barbed tube fittings for splitting and connecting multiple different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be…
Easy to print hook for your heater. Have printed it myself from PLA and works well. The model is available in different sizes. Starting at 15.0 mm diameter heater tube, up to 25.0 mm in 0.5 mm increments. I recommend choosing the next…
This is a remix of @Digitex https://www.printables.com/model/480267-nail-holder I added space for the magnet Magnet size is 6*6*2 mm round magnet 修改檔案來源 @Digitex 我新增了磁鐵的空間 磁鐵尺寸是6*6*2 mm的圓形磁鐵
A collection on well fitting vacuum hose adapters for the Dewalt DW735 planer. I have this planer and designed the adapters to provide a snug fit similar to that of the factor adapter. Adapters that have a bend have 4 retaining position…
Hose adapters with a 45deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
Hose adapters with a 30deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Originally Built by FrostyBird @ Thingiverse https://www.thingiverse.com/thing:5879291 Repaired in Microsoft 3D Builder Scaled to Standard Starship Model Scale 1:2500, 1:1400, 1:1000 and 1:350 According to production designer Dave Blass,…
Stencil, A - Z, 0 - 9, Common symbols. Prints a stencil with capital letters and numbers .5" high when printed 100%. Printing in transparent PETG would make this stencil easier to use.
English: Original headphone bow is easy to break while normal use. Yandex aka COMMO reject warranty in this case. So you can print it yourself. Russian: Дужка для наушников COMMO Immersive. Оригинальная дужка легко сломалась при обычном…
Hose adapters with a 30deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
10, 20, 38, 36, 40, 60, 100 teeth gears
New version 2. Based off feedback I have increased the thickness by 1.5mm which makes it a better fit to the keyboard of the Starlight greatly reducing flex. Thanks to user Strudster for the feedback and image. This is a keyboard brace…
This is a CHERRY stem version (works on Gateron and many other clones) of the AMAZING keycaps for the C64 made by pixelmaker04 (Thingiverse: 4684156) . The caps could be lowered by 1-2 mm in the slicer to avoid them hitting the key plate…
This is a set of common parts for my HPA adapters for glock type magazines. To assemble you need: 2 springs (may be get from automatic pen and split it by two pice); 4 m3*8 screws; 1 m2*14 screw or any 2mm thing to fix button; Hpa parts:…
P Clips for securely mounting cables and wiring harnesses/looms using M6 fasteners. Available in sizes 5 to 60mm outside cable diameters. Ideally printed with a flexible filament. I print mine in TPU with a high wall count. PETG may also…
Find all the information on how to print and build a working Commodore PET Mini, along the latest versions of the 3D files on the official website: https://commodorepetmini.com Introduction This is one of the most iconic-looking computer…
This consists of the common Swing Arm parts that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to…
Realistic replica of a common myna. The model features feather texturing along the model. I recommend printing it at a finer layer height or with an SLA printer. I sculpted the model in Zbrush, and did some clean-up and scaling in Blender.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a page for the common V-Spooler options that fit V-Spooler , V-Spooler X and V-Spooler Mini . They are available pre-sliced for Prusa XL and Bambu printers, and also in un-configured 3MFs for other devices. Clamp &…
Spring loaded DSLR/Mirrorless lens caps in common sizes (52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm)
My rendition of the Commodore Computers logo in a LED lightbox lamp. Can be hung on a wall or sit on a table. Choose your preferred LED lights and method for installing them but I went for pure white LEDs adhered to the back plate and not…
The Omniburner! Supported Extruders: Papilio and Papilio Lite - by myself (The Esel nennt sich always first) Sherpa Mini - by Annex Orbiter V2 - by Róbert Lőrincz LGX Lite - by Bondtech TBG Lite - by Triangelab This is a modified Mini…
For measuring a range of sizes from 1/8 inch to 2 ¼ inches. I was able to print the text with a 0.6mm nozzle, but I would recommend 0.4mm to make the text easier to read. Printing the top layer(s) in a different color makes it much easier…
Commodore 64 coaster Printed in Red, Blue & White PLA Prusa Mini Plus, 0,20mm SPEED, 20% infill
If you have any suggestions for improvement, feel free to share them as a comment.
The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5 Pro. Most of these settings will also work with the Flashforge AD5X and possibly other printers such…
This project provides about a dozen variants of C64/C128 cartridge cases. These models were built using adjustable, high-detail, non-destructive modeling for everything. It is therefore quite easy to make new variations on these basic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you often change the nozzle in your printer, or if you have several printers with different nozzle diameters, this nozzle indicator will come in handy. By turning the wheel, you set the dial according to the nozzle size you have…
This is my 1st design I haven't worked out the best way to print this, Any help post in the comments. Thanks edit added a version 2 with thicker walls edit 19/10/19 added a version 4 with a curved inside top so able to print the right…
This is a simple C64 display shelf stand.
Sometimes the need arises to perform the representation of small circles, something that is quite difficult to do with a common compass, this tool tries to help in the process. It is a tool known as a diameter template. In the corners…
Printed with a single extruder using the method outlined in a video on the CHEP Youtube channel found here . This method easy once you understand it and work out the details. It also results in a very nice surface. Note that the model is…
This simple jig allows you to quickly and accurately measure common metric thread pitches. Printing takes only a few minutes. The gauges are small and can be easily carried with you at all times, for example in your wallet.
This is an insert for the board game Return To Dark Tower. This insert supports Alliance and Covenance expansions (and 4 small miniature towers from the Dark Horde expansion). To be able to use this insert, you might need to either…
This allows you to use the newer Bambu style isolator feet with your adventurer. I modeled and tested them with some cheaper Amazon ones - but they should all fit. Please let me know if you find some are too tight/loose.…
Introducing the 3D Printable Flexi Common Side-Blotched Lizard. This intricately designed model captures the essence of the fascinating side-blotched lizard, known for its distinctive patterns and agile movements. Key Features: Realistic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
25 Common Vegetable Signs These were designed for PETG FILAMENT (but PLA is fine off course). I've printed them out on a Bambu Lab X1 Carbon, and they print well. The sharpness of the end is reduced compared to the other models I've put…
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
This is the multicolor design I made for the common egg from Palworld by modeling a chicken egg and studying the patterns from the game. My custom nest model to fit this egg (as well as real chicken egg, think dyed Easter egg) is…
Cover for C64 User Port (24 pin) / Cassette Port (12 pin) connectors. Connector I used: https://www.aliexpress.com/item/Sample-2pcs-Lot-805-Card-Edge-Connector-3-96mm-Pitch-2x6-Row-12-Pin-PCB-Slot/32539449444.html…
Hi all, I have made my own version of the Commodore 64 Cartridge case, that is easy to print on an FDM regular 3D Printer. You can print this one face down no support needed. I have a regular version and one with a hole for a small…
Commodore 64 + Datassette stand This is a remix of this model: https://www.thingiverse.com/thing:3921140 The C64&Datassette version is compatible with both the C64 and the Datassette.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are reproductions of the common curved and straight train tracks that come with many wooden toy train sets (such as Brio, Orbrium, Thomas, etc). Created in Fusion 360 with a few tweakable parameters including track length for…
My first computer ever. I modeled it a long time ago. This model was done with solidworks within 1mm tolerance. However this model is just a volume model without back ports. Easier to print. The original is like the real amiga in parts.…
Replacement control cover flap for Commodore Amiga 1081, 1084 and similar monitors. In three parts, print with ABS and acetone weld them together.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of the "Commodore 1702 monitor door" by SkaBoyTD. I made a number of tweaks and modifications to his original design. I discovered my Commodore 1702 monitor (NTSC) had some subtle differences with the placement and sizing…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I watched Common Side Effects and loved the little creatures that everyone who had taken the blue angel mushroom started seeing. I couldn't find any 3D printable files for these little guys, so I made one using Nomad Sculpt on my iPad. It…
A dustcover for the keyboard of your Commodore. Comes in different flavours, with the chickenlips-logo and as a blank cover. Also in one piece or splitted in two parts for the more standard-sized 3d-printer. Stp-file is added. The…
Do not insert this printed template itself into a drive. While it may work out OK, I'm not sure how the printed surface or any defects would affect the head and other internals. Template to mark and cut transport cards for the Commodore…
Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
A webcam holder to mount common webcams on Voron 2.4 and 3D printers using 2020 extrusions. Specifically, this mount fits webcams that have a horizontal tube-like hole in the back. I have included the Autodesk Fusion 360 files.…
Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Untested. The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
Case for Commodore 64 cartridge PCB. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.3 Infill: 10 Filament: Plasty Mladec PLA Orange Category: Computer
The Ultimate II+ Cartridge by Gideon's Logic has an optional Tape Adapter. Unfortunately the adapter does not come with a beautiful case. I looked for case models, but found none that I liked or that could be printed without supports.…
A good as possible (imo) replica of the old PSU-box for the Commodore 64 and VIC-20.You can use it to built in your psu-replacement. The outside is a precise replica of the original, the inside is cleaned out to give you space for your…
Wanted to make some custom stamps to use on postcards I'm sending out but couldn't find anything that matched what I needed. I've included a sample of a text stamp (can easily be customized in Fusion 360) as well as some funny ones of my…
This is just the stem for a key from a Commodore 64 keyboard. It does have a fair bit of detail to it, probably best for resin printing… Dimensional accuracy is important for a good fit. I did a number of prototypes on my FDM printer and…
Commissioned work for a retro fan. A (modified) C64 logo as key chain fob.
A modified version of the original front cover for Commodore 1541 II with MeGALoDOS Multispeeder. Modified for 0.96" OLED display and rotary encoder. The front fits for models with CHINON drive and together with the original case parts.
Gear Box Back to use common type 80T CNC pulley Let ERCF V2 use common type CNC metal 80T pulley There is nothing wrong with 3D printed plastic 80T pulley, instead, I think it's one of the most useful invention of the year, because 80T…
I have measured a lot of cartridges and they differ a little in sizes. Some fits very snugg in the holder and some are a little loose. Handic cartridges does not fit in this holder.
A 'chibi-fied' ~1/5th scale Common Berthing Mechanism hatch, like those on the International Space Station. Note: The mechanism does not work at this scale due to friction and lack of rigidity. All files provided without tolerances added…
![Amiga 500 [Commodore]](https://media.printables.com/media/prints/909817/images/6952877_a45f250b-982e-484d-91b1-3b1b4a5baf72_19f0fafd-3c55-4abf-b9f3-9d59a131f071/20240611_234605.jpg)
