Counting matching models…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET
The M6 Handle Collection offers a robust and practical handle for M6 screws – in 12 different sizes , providing maximum flexibility for your projects. This universal design is perfect for workshop applications, mechanical engineering,…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
When I realized that commercial GoPro style thumb screws are often much bigger than needed, making the whole camera setup frequently more bulky then necessary, I started to create my own thumb screws of different length. Then last weekend…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
For all makers out there making soft bates! Shallow screws are expensive and now with this tool you can make them yourself. Print instructions Video for how it works: https://youtu.be/zpEGzjKB8no Other needed components: Screw holder is…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Screws labels with pictures of DIN912 screws
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Tired of digging through endless bags of screws, nuts, and tiny parts? Meet the Modular Organizer , a customizable storage solution for every maker! Perfect for organizing 3D printer parts, electronics components, or robotics bits, this…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Protect and or decorate a screw head of wood screws, bolts or nuts with these caps. For countersunk or flat head screws, use the ring with the lid. The lid clicks on the ring. For the M3, M4, M5, M6, M8, M10 hex bolts and nuts use the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Corner Bracket, designed for M4 / M6 / M8 Screws. Enjoy. Layer height 0,15 Infill 20% Perimeters 2 Standard noozle 0,4mm Material PLA or PETG Supports No
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Are you an artist who struggles to draw circles between 10 and 70 mm in diameter? Well, I'm not, but you're in exactly the right place. Even if you're not an artist, this plotting compass is a very fun make. Similar designs retail for…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Print approx. €9.15–€11.19 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
I designed flag holder with hidden screws. I live on Norway so it fits Norwegian flags. but I guess it will also fit flags from other country. If you need flag holder with smaller/bigger diameter let me know. The holder is designed for…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
This is a collection of knobs for M3 to M6 DIN 933 hex screws. In each dimension there are 2 different knurled designs to choose. The knob dimensions are described in the table on the picture 2. To calculate the visible thread, you must…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :) https://www.printables.com/pl/social/236468-nieuniknione/collections/194978
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
This is a remix of zoltanf's "Prusament spool to master spool adapter " For my spool holder i wanted the outside of the prusament spool to remain the same without anything sticking out so this remix has some blocks that hold screws…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a rod clamp meant to be used with the Repkord RepRack but uses M3 screws instead of the plastite screws: https://www.printables.com/model/129024-reprack-system-by-repkord Fits Columbia MBF 1/2 inch EMT Conduit purchased at…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
The original parts do not make the buffer stable, and attaching it to the printer is not an option with the enclosure. The model contains several parts: a higher leg (+1 cm), a back-, top and bottom segmenter with honeycomb, and a plate…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm. When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight. I used black PLA…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…
Print approx. €3.73–€4.55 excl. taxPreliminary estimate for one variant
My 3D-printing philosophy: Things should print without supports and snap together whenever possible. I wanted a box to put my Google AIY vision project in that was a bit sturdier than the included cardboard. The previous designs by…
Print approx. €4.46–€5.46 excl. taxPreliminary estimate for one variant
Just clip in the cover to hide the screws. Happy printing!
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for lego speed champions line of cars.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
Hope this model will be helpful. If you liked it please hit the [🧡 Like] button. While working on some projects I encountered with a scenario where I needed to make a simple circut for LEDs, which requires a resistor component along with…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
This is a case for the OpenDTU breakout board (easy to order from a board manufacturer using, e.g., KiCad). It has clips at the bottom to hold the board (not moving around) and a hole for the external antenna. I have used this with…
Print approx. €2.75–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
This adds a Hex key holder to the (great) display back cover. Now your Hex key is always close to your printer. This version is compatible with the original screws of the display! Want to add the Hex key holder to other (back cover)…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
SUNGUY USB Cable Mount https://www.amazon.de/dp/B09LYRRQ91?ref=ppx_pop_mob_ap_share Updated V2 Version with m3 grub screws. You can choose between two versions.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a very simple modular Filamentspool-Holder. You don't need screws. Only 4 608 Bearings are required. I should fit almost every spool on the market. Make sure your printer is calibrated correctly, fittings are very tight! Have fun…
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET
For me, I really liked the remix by @alexan_e. But it does not match my calipers since my screw is on the right side. So, I mirrored and enlarged the screw area to be useful for my calipers. I used no supports and ensured I kept the…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
I needed to disassemble a Deuta ENG 8/8 Tachometer used in a steam train for maintenance and cleaning, but the chassis is secured with special slotted security nuts. This model is a bit that can be used with standard bit holders (e.g.…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Print, assemble and play directly, no screws needed 8-11
This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types. Bigger sizes up to M12 are available here:…
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some, and this is my Knurled version of my standard thumbscrews. The thumbscrews are designed for socket head…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
The M4 screws (which includes a nut) were CADed with the intent of being able to use them in low-stress situations. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as…
Changelog: Changelog 30.07.24 New Gridformat added (3x1, 3x2, 3x3) with heights from 4U to 14U 26.07.24 Request fulfilled by @manofthesky_692784 : Magnetsocket added 18.07.24 STL files added as an alternative to 3mf format These…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some: The thumbscrews are designed for socket head screws and use a nut in the compartment on the underside…
Collection of Pull Handles for metric screws including : M5 M8 M10 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.
xpectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 20mm/s…
Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5-10mm/s…
I previously published a collection of handles for nuts and screws i designed over time. (https://www.printables.com/model/359479-handles-for-m3-to-m6-bolts-and-screws) It was quite popular and i was asked a few times to make the models…
These models of high-detail metric screws with a 3mm diameter are available in various lengths of 10, 12, 18, and 20mm. These screws are very common and are also used to assemble Original Prusa Printers! Warning: Do NOT use these screws…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
I made this handle curved-base to replace the original handles in my caravan. Printed in PETG, this piece is really strong and should withstand the elements. The original handles had a system to hide the screws using a flexible tab that…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
The screws are inspired by DIN 912/ISO 4762 metric screws with cylindrical head and hexagon socket and long threads. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard…
A simple spice rack for organising your spices. This could be mounted on cupboard doors or walls. Each can hold 5 spices. The design is compatible with spice containers of diameters up to 43mm (typical for Schwartz, Lidl, etc in the UK).…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…
Headphone holder for table No screws, no support Print settings: 8 walls 0.2mm layer 30% infill no supports Use PETG
Hello, I found this on my pc and then remembered I have remix for blade and try to find the maker of the original files but couldn’t find it on thingverse the link from file doesn't work so I am posting it here all. This was the original…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
Horizontally and vertically stackable drawers/organizer for small parts, screws, tools and other stuff. 10 different drawer layouts. Label spaces for easier organization.
The screws are inspired by DIN 931 metric screws with hexagonal head and partial threads. My inproved thread design should fit without tolerances. Please print with low layer height, e.g. max. 0.15 mm for a 0.4 mm nozzle. Please be…
I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…
Tool for Wood Screws Measure & Sort metric (Mesure de vis aglo/bois) for lengths to 10 to 80 mm and diameters 2 to 8 mm (half-unit 2.5/3.5/…) I've needed a tool to sort my wood screws. Optimized print profiles for Bambu Lab printers…
The counter project needed them, so I thought I'd add the required 8mm M3 screws and nuts needed to finish the https://www.printables.com/model/449690-game-counter-0-99/files make.
Gotta love a good box. The snaplock design from Hugo is great, but I wanted custom sizes and a few printability improvements. Combining my previous Tough Box learning together, and remodeling this in Fusion, you can now make up any sized…
I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
This small box fits a standard sized gift card and is secured closed by 16 screws around its perimeter. Also included is a file for a small screwdriver to complete the gift. 12/16/24 - Added a screw with slightly more tolerance. Try…
The screws are inspired by DIN 7991 metric screws with countersunk head and allenkey socket. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard dimensions any longer.…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 30mm/s…
This is a remix of my M3 screw knob design that seems to be quite popular. I have tidied up the code, made it more reliable to print, and expanded it to cover M3, M4 and M5 socket cap screws. It comes in two flavours: using either a…
Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it flat.
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
A purge waste bin. It doesn't vibrate loose, it doesn't require tools or printer mods, and it doesn't block vent slots. It's wider than it looks in the pictures, and, like a certain police box, it's bigger on the inside! What makes this…
Arduino UNO Snap-fit Case Based on 3D Printed Case for Arduino by ZygmuntW . Fully remodeled in Fusion 360 with following changes: removed need for self tapping screws added snap-fit stands at 4 corners added 1mm bevel on the bottom and…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…
Elevate your space with this modern wall hook STL file . Unlike traditional hooks that leave hardware exposed, this design features a hidden mounting bracket that ensures a sturdy hold without compromising on style. Key Features:…
Inside dimensions of the box without the radius: 53mm x 33mm x 30mm Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it…
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
A large set of metric dome head screws with partial threads inspired by ISO 7380. The standard design has been modified for easy printing. The improved thread design has a maximum tolerance of 2.5 µm. It should well fit without…
5/10/23 update: I also created a new alternative remixed version using toothbrushes/brass bristle brushes that looks like this, which you may prefer if you don't like the paper towel solution in this design. If you have a spare…
Hello, I have remixed the original files to make a version for conical screws, there are many hole sizes The design uses Conical Head Screws There is a step files available, so you can adjust the model for your purposes Have fun!!! ---…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
