Counting matching models…
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
A rack for 1.5mL centrifuge tubes, capable of holding up to 75 tubes. There are two versions: one with handles and one without. I'm experimenting with a version that is in vase mode for decreased filament usage. Fits on most build plates.…
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…
These designs are tube holders for 1.5, 2 and 5 ml micro-centrifuge tubes. It is designed to hold individual tubes straight during weighting. I also use it to hold 5ml tubes on a magnetic stirrer. The design objectives where to make it…
This is a filament clip specially designed for Inland (sold in MicroCenters) 1.75 mm filament (1 kg) spools. UPDATE: If the spool is very full, the filament tends to stuck into the clip during printing (if you don't remove it). The r2 now…
During my time working as a Fishery Observer in Dutch Harbor, Alaska, I had the privilege of encountering one of the most iconic fish in the North Pacific — the Pacific Cod . Even though I'm now living on the other side of the world, this…
The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…
I frequently get my filament from a Microcenter, and they sell spool-less filament for a little cheaper. I wanted to print a spool for the roll of cardboard cylinders to fit on, but the ones I found were too big. After taking inspiration…
Ideally print in PC but works with PETG. Use at own risk.
0.2 mL PCR Tube Rotor This is an alternate rotor designed for a benchtop mini-microcentrifuge. It can hold standard 0.2 mL PCR tubes and works well with individual tubes or 8-tube strips. For a mini-microcdentrifuge like the the one…
Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.
There is a version with and without handles. Holds 48 0.2ml tubes, 40 0.5ml tubes, and 36 1.5/2ml tubes. The bottom of each well tapers to a point to help tubes sit upright. The 0.2ml tubes are arranged in rows of 8 spaced 9mm apart to…
Tube holder for three microcentrifuge tubes
The carboard spools on rolls of filament from Microcenter and Polymaker are great for the environment... but they do not unspool as smoothly from a rod style spool holder as the old plastic variety used to. The spools carboard inner rim…
This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
A model of an empty Inland PLA filament spool from Microcenter. Model not intended for printing, mostly for exploring the re-use possibilities with a filament spool of these dimensions.
The adapter is the same width as 1.5ml and 2ml eppendorf tubes and is designed to hold 0.2ml pcr tubes for use in a microcentrifuge. The hole has a diameter of 7mm. The diameter is about 10mm throughout the bottom and about 13mm at the…
This is a lid for Grant PMHT PSC24N thermo-shaker microcentrifuge (Eppendorf) tube incubator. It's handy for keeping tubes nicely heated and/or minimising environmental contamination if you're using open tubes. Two models are attached, a…
“This is a fridge magnet to remind you of special deals. Print out a QR code of https://www.microcenter.com/search/search_results.aspx?Ntt=5206&Ntk=Adv and glue it in the square area.” STL designed by Plaidbear
Replacement sleeves for these usbc drives. a blank one is included so you can customize it yourself.
I have a bunch of these NTE 24 AWG wire spools and thought I'd make a Gridfinity holder for them. I chose to do single spools because sometimes I only need one or two at a time for a project. This is a single part and you just need to…
9x15 Microcentrifuge tube rack that can hold 135, 1.5-2.0mL tubes. More room for activities! I made it so I could have either 5 rows of tubes, skipping one hole down the column; or 8 rows of tubes, skipping one hole down the column, and…
Il termine croce gotica identifica due ambiti distinti: l'arte sacra medievale e l'estetica della sottocultura gotica moderna. 1. Arte e Architettura Medievale Nel contesto storico del periodo gotico (XII-XVI secolo), non esiste un'unica…
This is a fridge magnet to remind you of special deals. Print out a QR code of https://www.microcenter.com/search/search_results.aspx?Ntt=5206&Ntk=Adv and glue it in the square area.
The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…
This is a storage container meant to store 1.5mil tubes in complete darkness, in order to block all light I recommend using black PETG for the cup and lid, however if PLA is needed for color, simply increase the wall count to better block…
This is a card holder for the Microcenter sold Leo Sales Ltd. Metal Business Card Blanks. The cards measure: Depth: 2.12 in. (53.85 mm) Width: 3.38 in. (85.85 mm) Height: 0.01 in. (0.25 mm) The cards slide into the 3 sides and then falls…
I designed a tube rack for 1.5mL microcentrifuge tubes (modeled on ThermoSci generic low bind tubes). It supports 5/16 inch diameter by 5/64 thick magnets (harbor freight sku: 67488, 98371). two of the tubes have the magnets positioned…
Il termine croce gotica identifica due ambiti distinti: l'arte sacra medievale e l'estetica della sottocultura gotica moderna. 1. Arte e Architettura Medievale Nel contesto storico del periodo gotico (XII-XVI secolo), non esiste un'unica…
This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…
This is a storage container meant to store 1.5mil tubes in complete darkness, in order to block all light I recommend using black PETG for the cup and lid, however if PLA is needed for color, simply increase the wall count to better block…
Can hold 9 microcentrifuge tubes (1.5-2 ml). 3x3 array. Portable!
the microceratus is a small ceratopsian that is standing on two legs that are used for running to escape from predators and it comes from the movie jurassic world dominion
“La stampa 3D del Cristo sulla croce unisce innovazione e fede, trasformando la tecnologia in uno strumento per rappresentare un simbolo eterno di sacrificio e amore.”
I designed this box to put my Eppendorf tubes in during incubation, this allows me to lie the tube on its side in the shaker without the worry of the tube popping open. Can print without supports if oriented in the correct way. I…
