2,609 models
276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…
Print approx. €59.50–€72.72 excl. taxPreliminary estimate for one variant
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Print approx. €10.96–€13.40 excl. taxPreliminary estimate for one variant
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
A scan of my hand that's modified. There are also a six holes to mount it to a wall using a flat head screw or equivalent. (Don't use all screws at once they're there to mount it in one of 6 directions.) Printing the included .3mf file…
Print approx. €5.88–€7.19 excl. taxPreliminary estimate for one variant
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Very simple picture stand, scaled for a 5x7" picture. The hinge is a piece of filament. Print instructions Print flat, no supported needed.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Description Remix of the hinged picture stand by @MAKR_110201 for 5"x7" pictures. It's print-in-place now and doesn't require a piece of filament for the hinge anymore. Print Instructions Print flat and without supports. Layer height…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model is a luxurious soap bar holder designed to resemble the front of an ancient Greek temple. It blends classical elegance with practical function, making it ideal as a decorative yet usable bath accessory or novelty gift item.…
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for one variant
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Simple stand for postcards, letters, pictures or whatever you want to display. Printed on a Prusa Mini in about 30 min. Filament: Prusament Galaxy Black PLA Infill: 15% Layerheight: 0,15mm
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Structure of the Earth I present you an educational 3D model of planet Earth, showcasing its fascinating internal structure. This model is designed to provide a unique view into the Earth's interior, allowing for a detailed study of its…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Build your own heartshaped pictureframe. This cool Kit prints in an hour and can be assembled without glue. Just snap the parts together following this quick guide: For easier orientation of the foot, the is a little extra-heart that must…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
I wanted a way to display my 13*9cm photographs that works well, looks cool and obstructs little of the image, so i made this. Edit: As suggested in a comment, i added a version with open sides so you can slide in bigger pictures. It…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
The excellent model from user "Kagarov" ( https://www.printables.com/model/41007-orbital-structural-printing-print-in-place-lamp ) now available for the proud owners of the PRUSA MINI !!! Its about 92% the size of the original. However a…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for one variant
Salut, Voici une impression pour créer un crochet pour cadre photo avec un simple clou (20mm x 1,3mm environ). Parfait pour des cloison en plaque de platre Parfait pour des cadres de 10x15 à 20x30 Testé jusqu'a 4kg 0,35g de filament…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
The Ocean Wave Picture Holder is ideal for showcasing a 4in X 6in beach photo or a child's first surfing success. The 4in X 6in photo can either be placed directly in the wave, or attached to the optional simple frame print and then…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Picture Frame for Trading Cards in Ultra Pro Top Loading Sleeves The slot is just the right size. Slides in just right. Very satisfying. Fits the 3x4 basic sleeves. The tall Sleeves are a bit to wide for this frame. Plus those longer ones…
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for one variant
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…
Print approx. €12.18–€14.89 excl. taxPreliminary estimate for PETGSource material: PET
Die "Bienenwabenstruktur" wurde in der Höhe von ca. 2-3mm reduziert, was eine gewisse Biegsamkeit bringt. Überdies kann es dann als Grill, Zaun, Untersatz usw. verwendet werden. Kann bei Bedarf weiter dünner gemacht werden Bezüglich…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
... prostě háček na obraz. Print instructions It can be printed from a PET-G.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Bring mystery and elegance into your space with Nocturna , a sleek and modern geometric owl statue perfect for night owls and design lovers alike. Crafted with smooth, minimalist lines, this 3D printable model stands confidently on any…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for one variant
Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
New version V2 (Reduces filament usage and printing time in half. It also works with 4 sticks instead of 3, making it more resistant.): https://www.printables.com/model/577962-plant-climber-structure-for-tomatoes-beans-and-cli In Spain,…
Print approx. €17.26–€21.09 excl. taxPreliminary estimate for PETGSource material: PET
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
The design concept is pretty simple and straight forward. It consists of the following piece types and quantities: x2 compression pieces. x2 base. For a complete set, you will need to print all 4 pieces , have a string or a ball chain…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
Rocky Horror Picture Show 3d Plaque I need to redo this. Meh.
Print approx. €12.28–€15.01 excl. taxPreliminary estimate for one variant
A tensegrity is a stable configuration of bars and cables. The bars don't touch each other and are only connected via the cables. If the cables are very thin compared to the bars, the bars seem to float in mid-air. The position and length…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
I made this 4x5 picture frame to display my images. It uses 2mm thick and 5mm diameter magnets. I also created a version which I can use for my large format photography. When the picture is still wet the frame holds it to prevent warping…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Bilderrahmen für Fotos mit den Abmessung 10 cm x 15 cm Düse: 0,4 mm Schichthöhe: 0,2 mm Filament: PETG für andere Abmessungen Bildgröße angeben
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
If there are problems with the bed adhesion try to print it with brim.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
llavero de chimuelo y furia luminosa (yin yang)/ Toothless and Light Fury keychain (yin yang)
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
print a bunch of these, get popsicle sticks, and build stuff. it seems to work well with 2 shells, 15% infill, and no supports the gcode download includes 6 hubs
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
building-shaped pens
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
I wanted to use this holder mounted to the wall of a cubicle overhead storage bin. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 80 in C-clamp area, 15 elsewhere. 80% for screw. Supports: Yes, for threaded hole…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
A topological map of Colorado with a novel support structure. Cones are used for their strength. Since the supports stick out from the flat side, you can cleanly remove them with a chisel. If you want to be safer, something with a square…
Print approx. €14.88–€18.19 excl. taxPreliminary estimate for one variant
We needed a model to show off the unique capabilities of additive manufacturing, but we couldn't wait for hours for a print, so I modified an existing design and scaled the Z height by 50%, then I added text to the perimeter. The black on…
Print approx. €1.26–€1.55 excl. taxPreliminary estimate for one variant
An open-source, low-power, digital picture frame that gives images a natural, paper-like, aesthetic. Features: Web UI : A built-in interface to control PiInk and upload images over the network. Low Power : The E-Ink display only needs…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
I made a magnet from pictures of ponies from PonyTown game. No multimaterial needed just overlaying several layers of different filament colors. filaments order: Prusament Vanilla White Prusament pineapple yellow smurf blue Prusament ms…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
frameX - simple picture frame that can be used universaly, both landscape and portrait mode for 10 x 15 cm pictures printable with PLA with no supports, .gcode file provided for MK3S 3D printer
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Photo Size Frame is designed for a 4x6 photo Assembly Once all three parts are printed, they can be assembled using a friction (press) fit. Depending on print quality, if parts are too tight, filing the edges of the hexagons will ease…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
coins pour cube en bois - wooden structure coins
Print approx. €6.13–€7.49 excl. taxPreliminary estimate for PETGSource material: PET
Manufacturing Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer not one…
Print approx. €20.57–€25.14 excl. taxPreliminary estimate for one variant
Picture frame for 15x10cm pictures. In bottom there are two hearts. Frame printed from PLA Fiberlogy TruGold Material: PLA, PET-G, ABS, ASA etc. Layer high: 0,2 or lower Supprts needed
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
Human ankle with complex fracture, AO classifiacation 44B3.2 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €8.72–€10.66 excl. taxPreliminary estimate for one variant
Upgrade your 3D world with this sleek, architectural Solar Carport! Whether you are building a smart city diorama , an EV charging station model , or a sustainable farm layout , this design delivers professional realism without the…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
You can use either PETG or PLA. Picture frame snaps together. There are two frame sizes available which your Peripage Mini Printer can output. Enjoy :)
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This is a version of the CNCKitchen Extrusion Test Structure generated using FullControl , a gcode generating python package. To use, follow this link to the github Gist and click the ‘open in colab’ button. Once open, read through the…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
renglon de lectura para ayudar a personas con TDAH
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
https://www.rcsb.org/structure/1aoi
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for PETGSource material: PET
I got the Mosslanda picture ledge from Ikea. Put it behind the couch, it makes a great shelf for things you need to reach for - no need for a coffee table or end table! Only problem? My coffee mug is too big around to fit comfortably.…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for one variant
EASY!! Remember 80's videogames? How many times you “PRESS START” to begin e new match? Put this Picture on your wall, it will never be “GAME OVER”!!!! Never give up!!! The 3D Model has an hole for the nail. In this set you can find STL…
Print approx. €4.54–€5.54 excl. taxPreliminary estimate for one variant
I made this simple hook to hang my pictures on the wall. The wall was to hard to use nails so i used this with some two sided tape. My recomandation would be to use heavy two sided tape. I used one that can hold up to 80KG. For the…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This is a prototype enclosure for lumbar puncture simulator. It uses 3D printed lumber spine anatomical model from ALiEM. It is designed as an alternative simulator enclosure when the silicon for molding is not available. Manufacturing…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes 50mm OD when printed 1:1 scale, this way you can form large dodecahedron lettice molecule-like structure for kids and silly grownups. it is easily scaled…
Print approx. €5.33–€6.51 excl. taxPreliminary estimate for one variant
3D model of the 4v60 x-ray file from PDB
Print approx. €41.63–€50.88 excl. taxPreliminary estimate for PETGSource material: PET
EN: Long in my head, now finally realized. Holders for the honeycomb-structure-remix , or the grid and the holder . The hexagons are intentionally relatively precise so that the “buttons” adhere well to the honeycomb structure. This might…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
3D model of the 1FNT x-ray file from PDB
Print approx. €15.35–€18.76 excl. taxPreliminary estimate for PETGSource material: PET
Context buildings for architectural models or other types.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
2x2x2 unit cells of a diamond crystal structure with impurities Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for…
Print approx. €9.14–€11.18 excl. taxPreliminary estimate for one variant
Human talus with fracure, Classifiacation Hawkins III. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €12.65–€15.46 excl. taxPreliminary estimate for one variant
This print will only take as long, as it would take to make some instant ramen. Each frame will be a little different with a very interesting look. Naheulbeurk describes this form of printing suitably with “Task failed successfully”. All…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Rather poorly implemented design by me but hopefully someone else can help make it better!
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
EN: The stand in the style of Greek architecture is modular and consists of the following parts: - a universal column with a thread for head screwing - 3 versions of interchangeable heads (Doric, Ionic and Corinthian) - 5 length…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
2x2x2 unit cells of a diamond crystal structure. Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for Prusa XL and 3…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Consider each Polaroid picture as a leaf on your personalized tree. You have the freedom to design your tree or branches based on the number of pictures you wish to display, and you can adjust the number of leaves over time. The frame is…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Human calcaneus with fracture - Sanders 2C classification The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
Print approx. €9.77–€11.94 excl. taxPreliminary estimate for one variant
LED stringed lights support to illuminate pictures
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Generated STL with ChimeraX
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for PETGSource material: PET
If you want to spice up your wardrobe backside because you have oriented the wardrobe in your room that shows its ugly back, this print is for you! You will need: a 3D printer that can print this lovely adapter a frameless picture frame…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Picture Hanger for those big wooden frames print it vertically for best stability.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Hello, If you want to take your picture to the next level but don't have a socket, this is the perfect solution through IKEA's ROLFSTORP light holder https://www.ikea.com/cz/cs/p/rolfstorp-led-osvetleni-stmivatelna-bila-90519917/ 1x M3…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
This is a backer for the Ultimate Picture Frame (UPF) by Kat Creates. The UPF is a fantastic project that enables you to build picture frames of any size. Learn more here: https://katzcreates.com/ultimate-picture-frame-shop Faye offers…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Just resize it to however you like it.
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
T4 lysozyme is an enzyme that helps break down bacterial cell walls — a classic protein used to teach how structure relates to function. This model is designed for teaching protein tertiary structure, showing how different…
Print approx. €44.10–€53.91 excl. taxPreliminary estimate for one variant
Picture hanger for adhesive hook. Závěs obrázku pro nalepovací háček. PETG
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
I created a key fob for my OER discrete math text, Applied Discrete Structures. The 3D text was created with an Oculus VR headset and the Gravity Sketch app. The logo was created with Mathematica.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Usually when printing objects they talk about walls and filling, but I made a structure without walls, without filling, and also without a bottom and a cover. There are only bridges that connect and lean on each other. The peculiarity of…
Baroque Picture Frame, shown printed in Hatchbox Woodfill PLA at 20% infill and 0.2mm layer height. Picture area is about 4.5" tall and 3.75" wide at full scale. This is a remix of levenement71's beautiful Baroque Picture Frame as an…
I'm collecting old baroque picture frames for some years now to publish my photos in them (and to distract the viewers eye away from the amateurish photos to all the ornaments and shiny stuff). Now as I'm in posession of a 3d-printer (or…
