Counting matching models…
This is a generic phone holder that goes into the cubby hole FITS slot adapter I intend for this to be used with my pixel 3/4 phones but you can modify the dimensions to fit your phone / case. I printed this on a Creality Ender 3 with…
This printed center console cubby doubles the storage of your mk6 VW Golf/gti or mk5 Jetta. Simply remove your outdated MDI port, and snap this storage cubby into its place. Tight tolerances, durable side clips and the bottom locating peg…
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 . Print face down using PETG or other high…
If you've followed my 3D prints in the past, I like simple easy to print things that snap together with no other parts. And ideally with everything printed with good strength design. And of course, on the attractive side. I couldn't find…
Bolt EUV Lower Console Cubby. Printed in PETG. Attached with 3M VHB. Please share your Make
For those with an GEN 1 2001 model Lexus LS 430 who want to replace the cd tray with a functional cubby and usb. Made this due to a new Android deck setup. I created this with Tinkercad and printed as a PETG file for durability. Fits flush
This is a mount for an Apple Magsafe wireless charger to install into a Honda Civic Gen 10 under dashboard cubby. This is designed for the iPhone 17 Pro Max but should work with other iPhone 17s and older phones. There are versions for…
a simple little cubby to go in my tool cart at work. the bottom is sloped to make things easier to pick out if it.
Wanted a phone holder for my 1987 F150 without doing any permanent modifications to my dash or clipping it to the fragile 40 yr old vents so i made this adapter that slips into the coin holder/cubby slot behind the steering wheel and…
TPU mat for the back seat cubby hole in the center console of the 2026 MG4 to reduce things sliding around. FreeCAD file included in case you need to tweak anything. Printed in TPU, 0.4mm nozzle, 0.2mm layer height, no supports.
I made this for my cat, Abigail. I put her favorite blanket in it and she seems to like it. I made the edges convoluted mainly for rigidity but it will (probably) work as a acoustic dampener too, giving your pet a sounder sleep. Print it…
Honda Ridgeline (and Pilot) has a recessed cubby in the center of the dashboard that has limited use. This insert tray/drawer slides snugly into the cubby - flush with the dash - providing secure and out-of-sight storage for valuables and…
Name plates should be 6" wide, 1 ½" tall, and 1/8" thick/deep.
My clock was no longer functioning so I modeled a cubby to replace a broken clock on a 1st Gen Toyota Tacoma. Enjoy! p.s. I recommend printing on its “back”, which results in a faster, cleaner print, with much less support material. Print…
Blanking plate with holes for 5 Carling/ARB switches. Also incudes model with no holes. May redo as the ARB switches seem a bit smaller than the cheap ebay knockoffs I bought. I don't have a stereo just use an amp with bluetooth.
Hey All, I designed these label plates for my big ol' kallax with cabinets, drawers, and cubby boxes. The paper label inserts are 75mm x 30mm. The binder clips used to hold the plates to the cubby boxes are approximately 15mm x 10mm. The…
There are a lot of storage options for TCG cards but nothing quite fit my needs, so 3D printing to the rescue. With bulk piling up in boxes and limited desk space for hunting for that one card I swear I had somewhere, I can't keep large…
I created a simple storage box to fit into the dash cubby Audi uses for owners manuals. This helps with storing items due to limited space in the glove box and uncovered storage in the center console area. This box provides a few storage…
This printed center console cubby doubles the storage of your mk6 VW Golf/gti or mk5 Jetta. Simply remove your outdated MDI port, and snap this storage cubby into its place. Tight tolerances, durable side clips and the bottom locating peg…
Part 1 FZJ-80 AMPS mount: Fits into the "useless cubby" location. Incorporates a unique arm that cantilevers to the frame crossbar which makes this much more rigid than other alternatives. Is able to fit two AMPS ball mount plates.…
A mount for the Hot Wheels version of the Ford Maverick that fits in the Maverick cubby. Has a hole in the bottom front where a piece of filament or small nail can fit to go into the notch in the bottom of the cubby so it doesn't slice…
This is an alternative model of the radio blanking covers which provides a little storage.
Transform the underutilized cubby in your 12th-generation Ford F-150 (2009-2014) with this custom insert designed to mount the Auxbeam AR-800 RGB Switch Panel. This is a heavily modified remix of a model originally found on Thingiverse…
A little cubby that i designed to go above the dining table in a Scout Olympic. Printed in two parts and snaps together. Attaches via vhb tape.
This is a way to slide your scale into a nice storage area under your knife block. The “Top” has a cut out for my knife block (Farberware 15 piece set) to drop into and not slide when I bump it. I had to take off the feet for that to…
Wanted to organize my coffee space a little better but didn't like the designs available. I decided to make my own using hex styles. Three versions available.
What is it? A simple design that divides up the big open console storage cubby/pocket/whatever (the one under the climate controls) on the Mazda CX-5! Why? I tend to toss my glasses or sunglasses into the storage cubby but they have a…
I remixed Walletclan3D's excellent storage cubby to reinforce it with ribs for weighted\loading, and thickened the front so I can install fasteners. I found the cubby too small for storing things, but I needed a spot for my GMRS radio…
This is a bracket you can mount to the back of a tablet, such as an iPad Mini 4, that can hook onto the Touareg's dashboard cubby lid. This was designed for a Touareg T4 (2015-2017), but may also work on older models such as the T3.…
Dual USB and Aux in for Subaru below radio cubby. I installed an Android Head Unit ( Idoing ) which is not compatible with my stock Subaru Outback USB/Aux-In connectors. I printed a replacement plate which accepts this dual USB connector…
This is my original model, inspired the Materious Cubby from 2006 (now discontinued). As they describe it, and was also my brief in designing this take: The cubby coat hook challenges traditional form--rather than a coat hook being a…
Installs into cutout in top right of cubby hole of a 2009 - 2013 Subaru Forester. Fits USB port on Amazon: https://a.co/d/3aORGUU
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 . Print face down using PETG or other high…
A simple cubby for the top bunk to store a book or whatever you want. Two models are included the ez print model has no side walls like the one shown in the image. You will have to rotate the model 90° to print without supports. See the…
Keep your small treasures neat and visible with this minimalist cubby-style organizer . Featuring 4 smooth compartments and a clean, modern look, it's perfect for jewelry, small cosmetics, a smartwatch, or decorative trinkets. 🧼 Rounded…
This bracket replaces the handle of the cubby door on the Bush Furniture A1775872/WC81411 desk with a place to rest your headphones.
Mazda CX-5 cubby organizer with a wireless phone charger holder.
Our 4 wheeler front cubby latches broke after age but I made stronger exact copy’s to replace them and so far are working great. Old ones were hollow and these ones are solid for the extra strength. Pictures coming soon
No more radio? No problem. Just put in a full sized cubby.
Small shelf for the phone holder/Qi cubby on the 3rd generation (2024, 2025, 2026) Chevy Traverse. USB ports and 12V plug remain accessible with the shelf inserted. There are notches for adjustable dividers for sunglasses, etc. The…
If you've followed my 3D prints in the past, I like simple easy to print things that snap together with no other parts. And ideally with everything printed with good strength design. And of course, on the attractive side. I couldn't find…
Keep your desk organized with this tall headset stand , designed with extra clearance to fit a table microphone underneath . Perfect for streamers, gamers, and professionals who need space for both their headset and mic setup. Its…
Trailsport embroidered cubby tray. Just a remix of Frank M's cubby tray for Honda Ridgeline. Original creator: https://www.printables.com/model/1044888-cu
Want to add a little pop of color inside your 4th generation Tacoma or 6th gen 4Runner? This model replaces the blanking plug covering the small dash cubby on the drivers side, have a little fun with your color choice and even a custom…
A small coin cup that replaces the "flip phone" holder in the center console of the Avalon. Fitment is really snug.
A small clip to mount a walkie talkie in the dashboard cubby hole of a 2015 f150
Replacement mount for Midland Syn Tech XTR, with a cubby that another radio can be mounted in. If planning a dash mount, print in PETG or ABS, no fewer than 6 vertical shells, 100% infill. For the XTR mount, off the shelf machine…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…
Ah the Ford Maverick “mini cubby.” it's the small cup next to the cup holders. I designed a three piece insert to make a third 82mm cup holder. The Cubby Insert is upside and should be printed that way. If you don't have a way to glue it,…
made to work with: https://www.printables.com/model/1342073-slotted-cubby-insert-for-phone-mounts-ford-maveick use a couple zip ties on the back to attach
This is a 3-sided cubby with a total of 99 randomly placed marker points. This allows you to do marker scanning on three sides of a small object without having to worry about the scanner running out markers to track. It fits snugly…
This is a riser for the phone cubby to allow for straight usb cables.
Made a drawer for that oddly placed cubby hole that doesn't seem to fit anything. Made for a 2025 Tacoma but should work with the 4 Runner as well. Printed in PETG using fuzzy wall for the more robust look and feel. 3mf included for…
The Ford Maverick bed storage cubby is really handy for storing bungees, tie-downs, and other gear. However, I found trying to jam everything in and closing the lid without items spilling out a bit annoying. I designed this storage bin to…
I had a similar model to this for my wife's 2013 escape, as I hated having things roll between the front and rear cupholder, so having found a model to fit the Sierra, I jumped at the chance to whip up a very simple, but very handy model.…
replaces the cubby in GM trucks that is annoyingly too small to fit most phones. it is 3.12" wide and 6" deep. fits my IPhone 12 with a case very nice. pop the trim off and the old cubby out. Please feel free to modify this to suit your…
It surprises many that GMC/Chevy doesn't offer a built-in garage door opener on their Canyon or Colorado pickup trucks, even the most expensive models! Sad but true. This project uses the small inset in the dash some call the dash cubby.…
Bolt EUV Lower Console Cubby. Printed in PETG. Attached with 3M VHB. Please share your Make
This is a blank designed to cover up the cubby hole on the dash. This is a remix - I modified the dimensions a tiny bit, filled in the holes, and added a grab bar. I printed this on a Creality Ender 3 with eSUN PETG using the following…
This is an adapter designed to add a FITS slot to the cubby hole on the dash. I added a blank press fit plate to hide the space in the back and add some stiffness via press fitting against the walls. This is designed to be used with…
For those with an GEN 1 2001 model Lexus LS 430 who want to replace the cd tray with a functional cubby and usb. Made this due to a new Android deck setup. I created this with Tinkercad and printed as a PETG file for durability. Fits flush
This is a mount for an Apple Magsafe wireless charger to install into a Honda Civic Gen 10 under dashboard cubby. This is designed for the iPhone 17 Pro Max but should work with other iPhone 17s and older phones. There are versions for…
a simple little cubby to go in my tool cart at work. the bottom is sloped to make things easier to pick out if it.
I designed this phone holder to fit in the small cubby located in front of the driver’s cupholder in a 5th Gen Toyota 4Runner . The goal was to create a simple organizer that keeps frequently used items easily accessible while driving.…
Wanted a phone holder for my 1987 F150 without doing any permanent modifications to my dash or clipping it to the fragile 40 yr old vents so i made this adapter that slips into the coin holder/cubby slot behind the steering wheel and…
TPU mat for the back seat cubby hole in the center console of the 2026 MG4 to reduce things sliding around. FreeCAD file included in case you need to tweak anything. Printed in TPU, 0.4mm nozzle, 0.2mm layer height, no supports.
We love our 2023 RAM Promaster van. We're always looking for more storage space. There's a weird space to the left of the steering wheel. I made a removable bin box that slides in to store stuff. The lip of the dash board keeps it in…
Simple divider for a 2021 Subaru Crosstrek. Designed to hold an iPhone 15 Pro Max & a pair of Goodr sunglasses.
This is a little organizer, cubby, hanging shelf thing. I made it for our camping trailer. It attaches using a pressure clip I modeled after the ones that came with our trailer fans. We use it to store our glasses, cell phones, watches.…
This model mounts in the small passenger side bed cubby box to keep things from falling out. Mounts using the two existing holes and two additional holes you mark and drill. I just used random screws i found, shown in picture. I have…
There is no convenient storage location in the Bolt EUV for the two separate charging adapters needed to use NACS level 2 and DC Fast Chargers, so this caddy fills the need. It uses plug holder sockets designed by Dorbiman in a block that…
I had created a Similiar mount but with one arm and it was wobbly. So this is my attempt at a vibe coded dual arm 5th gen Toyota 4runner phone mount that fits in the center cubby. It maintains storage space but provides a convenient spot…
Replacement trim for the thin wood used on the Entegra Condor to trim the cubby opening.
An open-front cubby for small low-profile USB-C "disc" drives. The drives lay flat and slide in from the front face; about **4 mm of the body sticks out** of each slot so you can pinch and pull them straight out. Closed back, top, bottom,…
Admittedly, this is a specific and custom built designed for a rather specific use. But hey, maybe someone else out there maybe might possibly could maybe use this too ;) I designed this to get the Apple TV box out of the way and yet…
2026-08-01 New V2 released I ordered the original part from Subaru and re-did the model to better align with the dimensions of the real part, and attach to the vehicle with tabs, also like the real part. There are two versions of V2: one…
A very basic design that converts an empty 2DIN/Double DIN frame into a useful storage cubby. This was designed to be installed without a metal radio cage in place, purely just the black dash trim. It has a hole in the corner of each…
Bike Helmet cubby, allows to store some small items such as bike computer or lights. • Mk1 New Voronoi Sidewalls cut outs, because voronoi is the sh!t • Mk2 added obligatory photo of make
Designed to fit 12.5mm button switches. Designed to mount with Velcro or double stick tape. Velcro mount inspired by “Kl0ck ”
3D scan of the cubby next to the touch screen on the ford maverick.
This is a mount for an Apple Magsafe wireless charger to install into a Honda Civic Gen 10 under dashboard cubby. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: Inland…
Created this to mount 2 switches for driving lights on my 2104 Silverado. You need to remove the cubby pocket also OEM rubber and drill a ½" hole in the bottom left. This can be covered up with original rubber bottom if you sell the…
When I got my 97 Ford Aerostar, the dash cubby was really gross and the fabric inside was soaked with *something* - so I designed a replacement. IIRC it isn't perfect, so you may want to make changes, but it was good enough that I kept it…
This is a parametric "smart" pen/pencil/tool organizer/cubby/holder. I designed this for my daughter, who has very limited desk space. You specify the dimensions of the pen and some properties of the organizer and the rest is automated,…
Tesla organizer that fits under the screen perfectly. It holds the charging adapter on the right side. I put some non-slip material in the center compartment, then use it for my sunglasses. They stay put, even under hard acceleration.…
Wanted to organize my coffee space a little better but didn't like the designs available. I decided to make my own using hex styles. All the parts may be arranged within your chosen slicer on the empty base or you can download a…
For installation: Remove your old cassette player and housing undo the two screws holding the cassette player to the mount/housing Install the printed part into the housing (should be a snug fit), make sure the lip on the opening is on…
This is a remix of a phone holder for a 2022 Ford Maverick, designed to hold a Samsung Galaxy S22 Ultra. Phone cases are accounted for, and only the holder was resized so this still actually fits in the slot on the vehicle. Don't forget…
all main parts made from plywood (12mm) use a piano hinge at back and attach latches at front. 3D printed cup holders
