Counting matching models…
Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Wire Cutter Holder for the HSW Compact holder that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. 3 Different variations. Cutter Dimension This holder is designed based on the generic wire cutters with the…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.2 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
New edition - April 2025: A guide pin has been added to prevent the cutter from twisting. The thread for the screw has been made more print-friendly. All that is needed in addition to the printed parts is 1 segment from 18 mm snap-off…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
It's a pastry cutter. It's very simple. Height is 6.2 cm, width 5.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Chase, Marshall, Rubble, Skye, Rocky and Zuma
Drawing inspiration from the file in the Remix section, I have thoroughly revamped it for seamless printing on my Prusa Mini+. To enhance functionality, I've incorporated additional reinforcement to stabilize the cutter shape during use,…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
It's a pastry cutter. It's very simple. Height is 4.9 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
The original file was too low poly to make the slicer give nice perimeters so I recreated it in Blender to make it smoother.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…
Print approx. €5.14–€6.29 excl. taxPreliminary estimate for one variant
8cm cookie cutter and Stamp of Gingerbread Man / Person, Can be printed together to save on space on your print bed or seperated.
výska vrstvy 0,30 vypln 0,20 PETG/PLA
Winnie the Pooh cookie cutter.
Print approx. €0.99–€1.22 excl. taxPreliminary estimate for one variant
I created this utility primarily for cutting ceiling molding at 45° angle. ⛏ Print instructions ⬢ Material: Prusament PLA Galaxy Silver ⬢ Layer: 0.2 mm ⬢ Infill: 40% Grid - bottom (base), 15% Grid - top
Handy box cutter or decorative karambit knives - available in 2 sizes - 10 gram prints
Ausstechform X-Cat / Cookie cutter X-Cat
Cookie cutters for clay jewellery making that shape and cut clay into consistent and intricate designs, allowing for the creation of professional-quality pendants, earrings, and charms. These are super tiny cutters, the smallest ones are…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
As titled, a Halloween cookie cutter in the shape of a witch. Enjoy! And If you have a minute, check out my other models! https://www.printables.com/@MiguelM/models?o=download_count
Cookie Cutter (Linzer Augen) - 2 versions The files can be scaled as desired. The original file has a cookie diameter of 65mm. Use version 1 (upscale) for larger cookies and version 2 (downscale) for smaller cookies, otherwise the cookie…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
!!! Please Read The Description Before Printing !!! Key features: Customzie: you can choose your width of your strips, the No complicated vitamins: no bearings, or complicated components needed: .step files are provided: easy to modify…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
K dispozici jsou 2 vykrajovátka na cukroví - s jelenem a bez jelena. Pokud chcete dělat cukroví jako na obrázku (linecké), udělejte jedno bez jelena, potřete ho marmeládou a přilepte k dílu s jelenem.
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Piglet cookie cutter.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
The perfect cookie for FNAF lovers, I recommend printing with PLA or PETG and the default print settings should work fine.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Christmas Bell cookie cutter. Created by the children of Fab Lab León. Through the application https://app.cookiecad.com/ Printed with Prusament PETG Jungle Green
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Santa cookie cutter (not tested yet)
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
I'm not a spy, I swear! This is a pentagonal cookie cutter with 5 diameters (10, 20, 30, 40 and 50mm). It's compatible with my CCC - Canned Cookie Cutters storage solution. Check out my other polygonal cookie cutters on my profile! If you…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
It's a pastry cutter. It's very simple. Height is 6.5 cm, width 6.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Cookie cutter based on czech scout logo. Vykrajovátko ve tvaru české skautské lilie. Print instructions Printed with 0,3 mm layer height and 0,4 mm nozzle.
George Pig cookie cutter set
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
A cutter with ball bearings seemed like it would be easier to cut and more efficient, but I didn't have a grinder to grind the bearings. While browsing the recreator3d.com site, I found out that Amazon sells a bottle cutter.…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
Keksausstecher für Ostern (Osterhase + Ei) Cookie Cutters for Eastern (Bunny + Egg)
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Info: cute rocket made completly by my wife (who is not on printables) so sharing in her name Print info: no supports designed for 0.4mm, but arachne algorithm will do its job for other sizes and scales probably as well any layer height
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Hey! I made this cute little bunny cutter for my easter cookies Size 80mm Blade Depth 10 mm Thickness 1 mm Handle Height 2mm Width 2mm Material PLA I used my Creality Ender 3
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Cowboy Hat Cookie Cutter. No Supports.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Labrador cookie cutter Printing Recommendations Print using a FDM 3D printer Recommended Materials PETG or PLA Print Settings Infill: 10% to 15% Walls/Perimeters: 3 or 4 for strength and sealing Layer Height: 0.15 to 0.2mm Supports: none…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
If you are beaker, this is must have. Get creative with your bread ;). See attached photos.
Somebody once told me About a cookie cutter, It was green and round and shaped just right! Like me, you're sad there's no Shrek Christmas movie? Then I have the right cookie cutter for you. I have made the cookie cutter in 2 variants,…
A simple system to cut and form a beautiful marzipane rose in no times. Jednoduchý systém jak během chvíle vykrojit a vytvarovat krásnou marcipánovou růži. A simple picture guide is included in the photo gallery. Ve fotogalerii přiložen…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
A compass cutter cuts paper in circle shape. It requires a piece (two segments) of 9mm width utility knife blade and five pair of M3x8 bolts and M3 nuts. See pictures for assembling. It could make 1.0 ~ 7.5 cm radius cuts (2 ~ 14 cm in…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Always perfect donuts 🍩🍩🍩 Very thin donut cutter with a diameter of 10 cm or 7cm. The cutter creates a perfect ratio between the size of the hole and the donut itself. Available in two versions: ultra thin wall - 0.4mm exactly 1…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Porsche 911 cookie cutter
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell cookie hat moon ornament snowflake star tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Have a look at my other cookie cutters: https://www.printables.com/model/1076708-cookie-cutter-baby-02 https://www.printables.com/model/343340-snowflake-cookie-cutter-ejector https://www.printables.com/model/151672-beer-bottle-cookie-cutter
A small Xmas Excavator cookie cutter. Update 10.12.2022: Added STEP file New GCODE and 3MF files OnShape Link Note: Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much. Happy printing!…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Printed with PLA,PETG, ABS, ASA, ASA275 at 0.2 or 0.3mm layer height, 15% infill without supports. x: 90,03 mm y: 74,72 mm z: 16 mm
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Circular pasta and pierogi cutter 10 cm / 4 inch
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
After scaling up the original model to the size I needed, the print was too large to be usable. I made a new one slightly larger with a lot less material to make the print go faster. Enjoy!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Cookie cutter in the shape of a hat with pompom. Vykrajovátko ve tvaru čepice s bambulí
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Check your material thickness quickly with this easy mod. gauge is in metric units. Cut from 5mm acrylic or wood Text can be cut or engraved. File is provided in .ai .svg and .pdf format
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
I made a few simple cookie cutter heads of Sesame Street characters.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Hello friends from all over the world :) This is my contribution to the cookie cutter contest. In Germany, in the winter time there is this gingerbread mix, called “Herzen, Brezeln, Sterne" available in every grocery store. With these…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Five-leaf piston flower cutter that is used to cut out marzipan flowers for decorating, for example, cakes. / Pětilisté pístové vykrajovátko květiny které slouží k vykrajování marcipánových květin na zdobení například dortů. When…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
guide → https://learn.adafruit.com/fisher-price-usb-controller toy → https://amzn.to/3pHMUNH
Osłonka na obcinaczki do filamentu , które są naprawdę bardzo ostre. Jeżeli ktoś by chciał plik w formacie .FCStd stworzony we FreeCad to zapraszam tutaj na moją stronę :…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
A cutter for two layer cookies.
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
I print these at 0.3mm because they don't really need to be detailed.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
size cutter and stamp: 54,53 x 83 x 16 mm size imprint cutter: 53,81 x 83 x 16 mm I printed with PLA, 0,2mm layer height and 15% infill
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Who controls the British crown? Who keeps the metric system down? We do, we do
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
Instagram: @roiku3d
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
I hae printed it like this: No Support PETG 0,20mm 15% Infill
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Aufbewahrungsbox für Nagelfräser "COSLUS" Diese habe ich von Amazon und da war leider keine Box dabei... Das Coslus Fräsergerät ist 150mm lang und hat 20,7mm im Durchmesser Ich habe die in die Grundbox einsteckbaren Aufnahmeringe mit…
Print approx. €11.30–€13.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a Cutter - Engraver i made for a Pastry Chef i made a few years ago. She wanted to decorate a birthday cake with 3D Baby Shoes made out of Sugar Paste (Fondant). There are 6 pieces that cuts sugar paste and combining all pieces…
Makes an umbrella shaped cookie
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
For the CNC machine I am going to build I needed some milling cutter holders. Therefore I remixed the "Pluggable Containers" thing in order to be able to adapt the box to different numbers and shaft diameters of various milling cutters.…
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for PETGSource material: PET
Drucken Sie es in ABS für Flexibilität und Spülmaschinentauglichkeit. Keksausstecher mit Konturen ( Akita Inu )
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Rounded version of the DHP's Stanley Box Cutter bolt, which make this great utility knife more pleasant to use.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
Printable stave drum angle cutting jig. Parametric model for different drum sizes, miter channels, tool distances etc. This angle cutting jig was especially designed for stave drums in conjunction with a router table, but it can of course…
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for PETGSource material: PET
Simple hexagonal cookie cutter I made that cuts out 6 hexagonal cookies at one time. Would recommend printing in PLA as it is a consumable plastic. Print with any infill but I would recommend 15%
Coffin Cookie Cutter 4x3"" No design added so that you can frost and add your own unique design! Central Reinforcement to aid in holding its shape while in use
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Cutter for Cookies
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
A nice gift for a 50th birthday party
Okruhly vykrajovač cesta o priemere 8 cm napr. pre pirohy, šatôčky alebo šišky. Tlačene z PLA. Gcode je naslicovaný pre MK3S s viacerími nastaveniami pre podpery a hranu vykrajovača. Pozri aj vykrajovač hranatý. Ak sa ti model páči klikni…
Štvorcový vykrajovač cesta s hranou 8 cm napr. pre pirohy, šatôčky alebo šišky. Tlačene z PLA. Gcode je naslicovaný pre MK3S s viacerími nastaveniami pre podpery a hranu vykrajovača. Pozri aj vykrajovač okrúhly. (…
Cookie cutter for gingerbreads or other types of dough. Ideally, the dough should not rise a lot to keep the walnut shape. 50 x 40 x 14 mm
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
STEP-Modell leider nicht mehr gefunden
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Hello, Today I have a bone-shaped cookie cutter for you. Suitable for Halloween, or for gingerbread, or maybe for dog treats. I used PLA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This is a Hose connector for the K40 Laser Cutter to replace the out of the box fan with an external fan or air filter system. It is attached to the standard bolt holes in the backside of the K40. See the pictures ;)
Print approx. €17.30–€21.15 excl. taxPreliminary estimate for PETGSource material: PET
Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
Who controls the British crown? Who keeps the metric system down? We do, we do Who keeps Atlantis off the maps? Who keeps the Martians under wraps? We do, we do Who holds back the elctric car? Who makes Steve Gutenberg a star? We do, we…
Print approx. €10.36–€12.66 excl. taxPreliminary estimate for one variant
適用 4英吋砂輪片，內容高度 2英吋
Print approx. €5.85–€7.15 excl. taxPreliminary estimate for one variant
Motive for creation 作成の動機 I purchased a laser cutter (Two Trees TS3) with a built-in air filter, but when cutting MDF, smoke leaked from the device within a few minutes of starting operation, and I could smell a pungent, irritating odor…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
This cookie cutter is based on the fact that two different Koch snowflakes can tile the plane. This idea was suggested by @Daridam as an alternate use for the Koch Snowflake fidget . You need to print 5 (or 6 depending on your slicer)…
Print approx. €3.92–€4.80 excl. taxPreliminary estimate for one variant
REPUESTO ENGRANAJE SISTEMA DE CORTE DE PAPEL PLOTTER HP T130
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I printed this standing upright for strength, not that it is really needed most likely. Attached to cabinet with double-sided tape.
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
This is a tool that helps to make the rivets I use in my glasses. The tool slides over the handle of those cheap snippers that probably came with your Ender 3. Slide until the hole is under the snipper blade. Place a length of filament…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This device is a perfect gift for everybody you can stamp cookies, and impregnate the word love in it. But you can also use it for your own home to create a lovely mood. No supports needed, print in plase. I wish you a great meal ;)
This device enables one to hold the elastic for the headband with one hand; freeing the other hand to make holes in it and cut it to the required length. The roll of elasticated material passes through the device and is held by two…
Print approx. €7.14–€8.73 excl. taxPreliminary estimate for PETGSource material: PET
