217 models
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Use case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. I added different models in order to fix it or place it in a…
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
The shelf bracket was inspired by generative design. The original generative design calculation has been simplified and strengthened in the VR environment and optimized for 3D printing (no support required). Software used: Fusion 360,…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Adapted for the MRD068A ESP-32 Screw Terminal adapter. Hole spacing is 60mm. Need to print 2x ESP32-Terminal-DIN-Mount.stl
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
With this case the camera can be easily mounted on the aluminium extrusion profile. You will need 4 m2.5 12mm screws for the case. You can use m3 8mm screws for mounting the camera to the bracket or use m3 12-15mm threaded studs and…
Malá poklice přes šrouby.Já tiskl na dvě části 16,5mm řez, část 0.1 mm ABS a vnějšek 0,2 díl : 7D0 601 149 A
The original part is made out of PA6 GF15 but feel free to test possible alternatives. I would use at least PETG or ASA.
DESCRIPTION This is my wool winder, the Wind0Matic. It's fully designed with 3D printing in mind and most parts are printable without supports. Heavy or lightweight yarn, this winder turns all yarn weights into nice cakes and is easily…
I purchased a bunch of Xiaomi LYWSD03MMC temperature and humidity sensors for use around the house. They are cheap and work very well. I re-flashed mine with some open firmware and have been using them very successfully with Home…
The wall lamp was inspired by generative design. The original generative design computation has been simplified and reinforced in the VR environment and optimized for 3D printing (no support necessary). The cable of the lamp has been…
Need 2 self-screws 2.9x13 or two hot-melt nuts M2 and two screws M2, for a better look use the handle as in the photo from here <3
I wanted to give a try to the Goodman handle concept so I designed one to go with my new Sofirn SD01Pro dive light. Also, having a GoPro like camera I added a foldable arm to be able to jump into water with the light (and camera) hanging…
se case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. Impression I recommend printing it vertically in PLA or PETG. Please…
Stand001 Designed with a focus on minimalism and functionality, this 3D model combines clean aesthetics with practical usability. Perfect for enhancing everyday life, it reflects the FORMAstudios commitment to thoughtful, high-quality…
The stock air filtration system doesn't do much actual filtering and instead just moves all the fumes from inside the print chamber to outside of it. This should help significantly cut down on the fumes and smells while resin printing,…
I have created another model for model railway enthusiasts as part of my ongoing efforts to bring model railways to life, this is an easy print and has a lot of stone wall detail. I have many 3d models now completed and continue to add…
DESIGN DOES NOT SUPPORT CASES Converts the Dockteck DD0003USB-C Hub into a fully enclosed Steam Deck Dock. V2 Design means new snap design and no more screws needed. Tolerances were made for printing at 0.3mm layer height. IMPORTANT!…
This is a wheel component created for the purpose of mounting on a mechanical keyboard. Inspired by the EVQWGD001, and fits in the size of 1U of key switches. You can see a detailed description, footprint, and sample PCB on the project…
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
My brother was renovating his motorbike and he wanted to also renovate the old plastic cap hiding the bolt (as seen on photo). So i designed a snap-on cap from petg. I had only orange PETG, so he had to paint it black.
I recently picked up the ESP32 based OpenTherm Smart Thermostat kit from DIYLess ( https://diyless.com/product/opentherm-thermostat ) as a cheaper alternative to a brand name smart thermostat. It came with a Xiaomi Mijia Bluetooth…
Recirculate the air inside the chamber using more activated carbon pellets than what came with the Creality LD002R resin printer. The original setup of the fan blows the fume out into the room which doesn't make a lick of sense. This…
Xiaomi Mi Temperatur Sensor LYWSD03MMC-z Batterie Mod von CR2032 auf CR123A und Magnet-Halter (Optional) Ich habe den Mi-Sensor von Bluetooth auf Zigbee geflasht um das Teil problemlos in mein Smarthome zu Integrieren. Da nach dem Flashen…
the support can be easily removed M6, M10 and ECAS Coupler
Dichtring VAT Tank LD002H creality Mir ist der Dichtring vom VAT Tank kaputt gegangen da habe ich diesen gezeichnet und gedruckt mit TPU A95 und Raft, dieser passt sicher auch in ähnliche Tanks Durchmesser ca. 145 mm Sealing ring VAT Tank…
Use this adapter to let the resin drip from the build plate back into the vat after printing. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Amazon PLA Category: 3D Printer…
A bracket for a 12V socket that can be bought online on auction sites. The bracket fits between the steering head and the air filter on an AfricaTwin XRV 750 RD07. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A simple easy to print voltmeter support for your dash no drilling no fuss just some assembly double sided adhesive tape hole is 30mm dimensions are: W x H x D (width, height, deepth) 50mm x 70mm x 50mm voltmeter:…
A support for Teccpo TDHDOP drill. Can be mounted on ceiling or wall. If you like my designs give me like and share. If you like them a lot invite me to a coffee. https://www.buymeacoffee.com/kjbturok…
No supports needed, no brim, 15 % infill.
My wife hated the SD01 because it is too bulky and heavy. Then I watched a video about ISE Alien light … of course, why not use two of our backup lights as a single primary! The burn time of SD05 is plenty for our dives. The beam of SD05…
I have created a Goodman handle for the lamp Sofirn SD01 and also SD09L. The width of the handle inside is 105mm. I used this great model as a source of ideas: https://www.printables.com/de/model/85131-goodman-handle-for-sofirn-sd01 The…
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
A small case for small SPDT switch SS12D00G3. No supports required, integrated sacrificial layer and built in clip.
The lamp was inspired by generative design. The original generative design calculation was simplified and reinforced in the VR environment and optimized for 3D printing (no support necessary). The powder-coated tubes have a diameter of…
Simple but sturdy way to your Ryobi FVD01 Screwdriver vertically reducing horizontal space on your pegboard and declutters your table top. Designed in Tinkercad. Requires minimal supports just to sustain the pegs. Organic Supports work…
Remixed both the Hexagonal Stealthburner and Knomi version by both @demek and @yezariael, fixed the knomi version had some thin sections that did not print out right from an old step file, I believe but has since fixed that. For single…
support plate for accessory instruments next to the tripmaster. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Filament: Eryone PETG Category: Automotive
Extractor fan shroud for Creality LD002R resin printer. Using standard PC cooling fan & 100mm flexible ducting pipe.
Description I wanted a card holder that worked more like the way I wanted. The ones I either got were either tied to a neck-band, had holes at unsuitable places, could only store one access card at a time or were too bulky. So I added…
Bracket for an steelflex brake line for the Africa Twin XRV 750 RD07. These brackets are smaller. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Filament: PETG black black Notes:…
Panel for the spot welding machine for cells. NY-D04 40A/100A. from Ali. Only the selected (yelow Line) element and base for the electronic board. Print instructions Unassociated tags: NY-D04 40A/100A Category: 3D Printing Print Settings…
Print info: material: PETG 0,2 mm layerheight 100% infill no upport needed
This print requires some M3 heat-set inserts with 5mm OD and around 3.6mm height. The hole pattern on the back is 32x32mm M3. The hinge is modeled mainly as an afterthought, it's not very sturdy. Source f3z file is attached for easier…
FINAL PRODUCT: see pics battery flange 50325MY1000 for RD07 / RD07A print it in ASA / ABS or some Heat resistant filament use supports 30% (or more) infill
Custom version of the ELP Camera Module Mount. https://www.thingiverse.com/thing:3133056 Ver2.5 Go Pro mount compatible version. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill:…
This fits on smartmeters with D0 opto interface. As an example you can use a wemos D1 mini flashed with tasmota firmware for forwarding the SML messages to your smart home solution. What you need: wemos d1 mini, infrared sensor as innards…
A small holder / rain shield for the Xiaomi family of temperature and humidity monitors. For outdoor deployments
Print with auto tree supports as shown. 8 bits can fit, two in each slot.
Minimum-size radiation shield for the Xiaomi LYWSD03MMC temperature and humidity sensor. Two parts snap together.
Here's a little holder for a Xiaomi LYWSD03MMC to fit inside your Filament Dry Box. I use these sensors with ESPHome using the PVVX firmware and Home Assistant to monitor the humidity of my Dry Boxes.…
It has an extra 0.3 mm on the top of the placement to correct the heigh deviation produced by the support contact. I printed it with an 0.2 mm Z distance on the supports. I designed it with F3D and did it to add a temperature and humidity…
I design a compact case JMD0.96C. DISPLAY 128x64. It includes cutouts for pins. Be sure to have the same model otherwise it doesn't fit as well as you see in the picture. If you need help or you want to be printed this parts or customized…
This is a model of the rear sway bar bushing for some older VW AUDI cars. PLEASE use the correct materials if you plan on using this in the real world and use at your own risk. Complete proper testing to confirm that it will work for your…
Version 1: The model shown in the photos was created based on the measurements of the original remote control. Finally, the remote control in the holder is loose, but it serves its purpose and will not rub when inserting and removing.…
This is a remake from the linked Mitsubishi Remote wall holder. The original fit OK, but not quite in my case. I remade the whole model to fit a bit better and slimmed the hook a bit. There are two versions, one with screw holes and one…
A set of 3D printable dashboard covers / blanks compatible with VW T4 Transporter, Multivan, Caravelle, Doca, Syncro , designed as a replacement for part 7D0 858 179 / 7D0858179 . These parts are commonly missing, broken, or modified over…
Tapa para VAT para impresoras de resina Creality modelos LD-006 o Halot SKY, se imprimen dos partes y posteriormente se pegan.
B5 Audi VW Upper Radiator Mount 8D0121276 Found my project car was missing these upper radiator mounts and found that supply was limited or had long lead times to get new replacements. I was lucky enough to find a set in a junk yard and…
Altered the design to use m3 heat set inserts. Category: 3D Printer Parts
Thank you Shawn Morrison ~ LetsFlyRC ♥ -- Changes: ● Reduced wall in front of antenna to 0.8mm ● FDM printable ● M2 Heat-Set Inserts ● Simplified What you need: 4x M2 Heatset insert 2x M2 20mm (or longer) 2x M2 16mm (or longer)…
Neue, zweite Absauganlage für den Creality LD002H Resin Drucker, mit Aktivkohlefilter Die Absaugung kann in 3 Modi benutzt werden: Möglichkeit: Die Umrandung Teil 1 mit dem weißen Adapterstück und einem 40 mm Innenmaß-Schlauch.…
This is a simple wall mount for the Xiaomi Mijia temperature / humidity sensor (LYWSD03MMC). Designed to attach to wall using a Command Poster strip (size small). NB: This is not a remix (designed in full by myself), but more “influenced…
AAA and wall mount for the fantastic LYWSD03MMC
A simple drip tray for the Creality LD002H and LDH002R build plate to improve my post-processing workflow. After removing the build plate from the Anycubic Wash'n'Cure 2, I never have anywhere to sit it where it won't make a mess. This is…
I designed a 5 bit holder that mounts on the Ryobi PSBID01CN impact driver. I printed it at 100% infill with PLA, and a tree support to support the upper mounting point. The bits snap into the holders, and at first are a bit snug but…
Cover that fits the JQ-D022BT module and can be screwed onto a surface or case. The module itself is glued to the cover but holes could be drilled so it can be screwed instead. Can be used with this XH-M567 amplifier box . Model in…
I've designed a simple clamp to move Roland Module to different location to make e-drums even more compact. 2x M4 screw + 2x M4 nut is necessary
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
Dummy D02 Schmelzsicherung 50A
Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…
Found this nice little holder for the nifty Xiaomi temperature sensor / display. And in an attempt to organize my always cluttered desk, I've added a hexagonal fixture to it. Print standing upright, no support needed, but might be nice…
The excellent extension by Nick, but with a hole for a 41mm hygrometer. One segment only, pls refer to the original.
* Perpendicular to the Pegboard for easy access and reduced space usage * Clamp Bracket design to prevent it from falling * Strengthened Load-bearing capacity Please glue the parts. *"kitbox holder.3mf" is the holder for the toolbox*…
Case for the 7 inch LCD HSD070PWW1-A00.
The storage box with an openable sliding lid is for the Makita LD030P laser distance meter; it has a lower compartment for the batteries.
I couldn't find an adapter that fit my Dewalt DWE6411 sander and Ridgid HD06001 vacuum, which has a 1 7/8 inch hose, so I followed this great tutorial by Becky Stern and used Tinkercad to design one. I assume this would fit any brand…
This is a Goodman Handle with bungees for the Sofirn SD01. The design has already been tested over months and found to be good. In the back, another bungee is pulled through the lamp to fix the rear part on the arm. Feel free to leave a…
Ventline replacement fan model BVD0217-00. Printed with ABS and used to replace my RV's fan.
Protects the starter button of an AfricaTwin XRV 750 RD07 from contact with the tank bag when steering. The idea and design comes from the user soldier-dirk from the http://www.africatwin.de forum. Originally, the protection was made of…
I needed to replace the cover in my home lab server to make room for the OLED display of my PiKVM (namely a Geekworm KVM-A8).
This is a hex bit holder made specifically for Ryobi PSB1D01 impact driver. The bit forms a claw like insert that clips onto two of the impact driver's many vent hole. Holds on to the driver securely, I can pick up the driver from the bit…
Background This was initially designed for the MakerWorld Wireless Mouse Design Contest , and has been designed to use the components from the BambuLab's Wireless Mouse Kit 002 . Why The AD01 is a minimalist design developed for additive…
Printer: Tronxy 200x200 Material: Petg Nozzle diameter: 0.4mm Number of bottom layers: 3 Number of bottom layers: 3 Bed temperature: 70C Nozzle temperature:~250 Support: yes
Wall holder for new 2025 Xiaomi Mijia 3 mini BLE MJWSD06MMC temperature and humidity sensor
Couldn't find any good reference models online for sub-micro servos, not with decent file formats at least, so I made some myself. This is based on the Blue Arrow D03013 servo, and is FULLY PARAMETRIC, so even if its not exactly what you…
This is a toolhead based closely on the EVA3 I modeled it to allow for installation on a Tronxy D01 so as not to sacrifice any of the build plate volume. Components I remodeled from the ground up: Cooling horns (to suit a red lizzard K1…
If you’re looking for a solid battery storage solution for your Perdix 2 dive computer, Swift transmitter, and Orcatorch SD01, this case is a great option. It keeps everything organized, protected, and easily accessible between dives. 1x…
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm Update 5 jan2021 : Ive just added and new style part cooling fan & ABL bracket >> https://www.thingiverse.com/thing:4709799 Designed a printable stepper…
Print it with the closed side down, the groove for the cable must face up. Use supports!!! I printed it at a bambulab with .16 layer height and .4 nozzle. I used ASA, but petg should also work. PLA breaks
I modelled this up in Fusion 360 to hold my Ryobi FVD01. There is a 20 mm X 3mm neodymium magnet that is press-fit into the top. The holes are designed to fit #8 wood screws. There are three holes in the top for bit storage, and the…
Hier eine Absauganlage für den Creality Resin LD-002H / LD-002R Resin Drucker Für 60 mm Rohr Innendurchmesser, 12mmx3mm runde Magnete. Um es besser drucken zu können sind der Trichter und die Abdeckung separat. Das Gehäuse ist mit 3…
![Wall mount for Xiaomi Mijia temperature / humidity sensor LYWSD03MMC [Light weight]](https://media.printables.com/media/prints/10a9fbc9-8878-4b6c-babb-c2fdd1260dcb/images/9287229_0f07cc27-fc48-4375-a3ae-abfe6a1a4d7a_e87e254d-f6f3-47d4-a9b5-bc0d54600f64/img_20250322_181906.jpg)
