Counting matching models…
Easy-thread, quick-screw (I had to say it sorry) fiesta! A plethora of containers with easy-thread screw-tops. I was not satisfied with my previous creation due to a lack of deboss resulting in unsightly seamlines. Also the walls were…
Compatible with IKEA PAX wardrobe systems Designed for 22 mm diameter hanger rails Strong and lightweight 3D-printed construction Easy installation with standard screws Ideal for repairs, replacements, or custom setups An alternative…
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4.
The VOID30 is a handwired 30% ortholinear keyboard that uses a Pro Micro as a controller. Two versions for the top part of the keyboard are included, one with a logo and one without it. Bill of materials Redux 8 x M2x3x3.5 OD heat inserts…
Simple spout, see original model for details. In fact, just glue the centering ring into place and you're ready to go. Printed it in PLA+ without support.
D&D Dicetower D4-D6-D8-D10-D12-D30 The tested sieve is 12MM. It can smoothly place 10 sieves at a time without any lag. It needs to be printed on a 220*220 platform.
I wanted to create a case for my ESP32-WROOM-32U which is connected to an SCD30 sensor. It features: sufficient of ventilation holes and spacings a cut-out for a micro USB connector a hole for an IPEX antenna a small extrusion for the ESP…
Die Minidrehmaschine Hobbymat MD65 (baugleich Proxxon SD300) hat keine Schloßmutter an der Z-Achse, sondern nur eine durchgehende Leitspindel mit 1mm Steigung. Um den Support zu verfahren muss ordentlich gekurbelt werden - das ist mit dem…
Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series eg. D3004/602006) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4 for tweeter mount and M3 x 3x 4.2 for pod to mount bottom base Need…
Lamb for bolt or nut M5 D30 H15
I got me some of these new compact & foldable Godox softboxes AD-S60S, AD-S65W, AD-S85S, etc. for my Godox AD300Pro's. They work just fine but I wanted to use the magnetic color gels from my AK-R1 kit with them. So I decided to design my…
TLDR: These 30-sided dice roll 0 through 9 on a curve. When rolling the dice, you are 5-times more likely to get a 4 or 5 than you are to get a 0 or 9. Here is the exact probability graph, created using anydice.com : I was able to resin…
Inspiriert durch die Indexscheibe von Tony_G ( https://www.thingiverse.com/thing:726758 ) habe ich für meine Minidrehmaschine Hobbymat MD65 (baugleich mit Proxxon SD300) eine Indexscheibe mit 5 Grad-Einteilung konstruiert. Damit kann ich…
Overview Even if this mount is specifically for the Andonstar AD407 microscope, the mount may fit for other versions like AD409, AD302 and probably others, too. Just check if your microscope has a diameter of 35mm. If yes, this will work.…
The Godox AD300 PRO simple gel holder: I've designed a simple Gel Holder for the Godox AD300 Pro flash. Cut your Rosco, Lee, etc. filter foils using the included stencil to exactly 90mm in diameter. The thin ring is used to press the…
Compatible feet to raise bottom case clearance to 32 mm / 1.25 in. Recommended to print with the widest base section to the bottom and not add support to the overhang section.
Just your standard 120mm Fan Grill, stylized to match the Jonsbo D30/D40 top grill pattern.
The case includes the Sensirion SCD30 CO2 sensor and an AZ-Delivery NodeMCU V3 board. In the attached FreeCAD file, custom adjustments can be made in the spreadsheet. Wiring details can be found in the images. Programming is done using…
I like to be organized and I like to protect my stuff, especially stuff that I carry into the field. So I made this case for one of my RC battery chargers. Uses 6 M3x30 screws for the box hinge and latches and 2 M3x18 screws for the…
Protective Enclosure for the Sainsmart Genmitsu 3030 Prover Max – Modular, Functional, and 3D-Printable! This high-quality protective enclosure is specifically designed for the Genmitsu 3030 Prover Max CNC machine, offering optimal…
These are simple water trays or drip trays for the the popular and practical CD15 and CD30 seed module trays designed by Charles Dowding and manufactured by Container Wise. These seed module trays are my favorites for growing vegatable…
EDIT 2023/8/5: Forgot to add my wire tie beam it keeps the cables up from the plate. EDIT 2023/4/7: Finally made my own clone of the effector from scratch out of FreeCAD. No Spacers required now. Much cleaner and got back 10mm of height…
Arachne generator 3 walls
Needed an adapter for my Festool CLEANTEC CTL SYS to fit an Bosch PBS 75 belt sander. The vacuum hose inlet of the PBS 75 has an outer diameter of 30mm. The fit is snug but since I recommend printing with about 80% infil one can sand the…
A spindown D30, meaning that sequential numbers are adjacent to one-another on the die, making counting up or down easy. Great for keeping track of hitpoints, heat, ammunition, etc. 30 happens to be a great number for Mektek-related…
French (English below) : Apres avoir essayé le support de Zs0lt (très beau travail, Bravo. https://www.thingiverse.com/thing:3040390 ). La position ne me convenait pas pour du timelapse. J'ai chercher et trouver que la caméra pourrait se…
Stops the door and protects your wall. Hole 5,5 mm for screw. Size: D30x25
Simple holder for the Phomemo D30 thermal label printer: https://phomemo.com/collections/phomemo-d30-series-label-printer Printed using PLA, with 0.4mm nozzle and 0.2mm layer, used supports.
Why I was doing this? the original pinecil/t100 solder tip is expensive in my country so I was searching for cheaper pinecil tip alternative and found out that a cheap $2 hakko T12 soldering tip is compatible, but I find it too long and…
Turn your Fenix LD30 into a lantern or a traffic wand with this easy to print add-ons. The lantern cap is vented to prevent overheating Printed in clear PETG with no supports
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b. Main Tower: 135g if printed on its right side with normal support set everywhere. Side Panel with Window: 20g if printed flat with normal…
A stand for the the Gens Ace iMars D300 charger. Angle is 35 in the voroni version, 33 in the solid version. 150mm long 40mm tall 85mm deep 2.5 mm wall thickness https://genstattu.com/gens-ace-imars-d300-charger
A Gridfinity block / module for the Phomemo D30 label maker found here: https://www.amazon.com/dp/B08HV3MPFD
Replacement buttons for the Open CD30MP3 car radio. Printed with 0.25mm nozzle. Designed with OpenScad.
First and most important: The box is not my design and provided only as an ready to use example. The slim variant barely fits a Sovol Zero bed (152.5mm). If you need a Box with different dimensions please create it yourself. The library I…
For some reason (little kids might have something to do with it) the slider in my fridge (Siemens iQ500, KI81RAD30/03) that controls the humidity of the vegetable drawer, seems to break a lot. Before I had a 3D printer I had to buy a…
Wall brackets for an Arlec 4 Outlet Individually Switched Surge Powerboard With PD30W Rapid Charging USB A And C
Remixed this clip to fit my LowePro Stealth Reporter D300 AW camera bag. Might fit other LowePro's bags too. Print with as many walls as it needs to get the bending parts be walls only. I printed mine with 3 walls (on 0.6n), so for 0.4n 4…
Here is an enclosure I built for a 3d analog joystick to control marlin (In my case a lowrider CNC but should work for any marlin machine). You can find a discussion of the mod here:…
🇩🇪 Beschreibung (Deutsch) Wechselzahnräder für DDR-Drehbänke wie z. B. Hobbymat MD65 , Proxxon SD300 oder DLZ 180×450 (Präzimat) . Die Zahnräder sind mit einer originalgetreuen TGL-Schrift beschriftet und orientieren sich optisch am…
Simply put this spacer between the bezzel and lcd display to increse pressure on rubber contact pad. As simple as that.. Printed on Prusa Mini, I recommend 0,25mm nozzle with prusament PLA. 0,1mm layer height
Gaskets for the upper plug. To reduce the immersion of the tip of the soldering iron by 1.5 mm, after establishing the c
Headphone holder for mounting on Samsung S24D300 or SA300 monitors, etc.
A simple mounting bracket to connect a Microsift HD 3000 camera to the articulating arm
Needed a lay-down holder for a Phomemo D30 so I made one for gridfinity with one extra roll of tape as there was room.
MGN12 carriages for SeeMeCNC's barbells. For each carriage you will need 4 McMaster M3 Heatserts https://www.mcmaster.com/94180a331 4 M3x16 Screws (Mount to MGN12H car) 2 M3x20 Screws (Barbell) 2 M3x12 Screws (Belt Retainers) 1 M3x12…
Tellerschleifer D30-d3 Zum aufkleben von Schleifpapier (besser Gewebe) Als Achse ist eine 3mm Sechskantschraube vorgesehen, oben mit einer selbst sichernden Mutter gesichert.
I needed a bracket to mount the stack under my desk to free some space I suggest to use support for the screw stand
i recommend printing this out of petg, print as oriented when importing the files into your slicer, the main adpater needs support. You can print a retaining ring from another click and clean model, or buy one from the bosch spare parts…
This is a remix of Label Maker Storage for Modular Rail System by jdavison ! A SKADIS holder for the Phomemo D30 Label Maker. NOTE: Paint support blockers on the entire model except the back pegs. I used tree supports. See .3mf for more…
The screw depth on my Corsair XR5 360mm Radiators was very inconsistent, ranging from 3mm-5mm. Using 35mm screws with my Phanteks D30 fans worked for some holes, but ended up damaging the radiator at one corner due to the hole depth being…
This little guy slides in between the GPU and the fans to stop the GPU fans from hitting the bottom fans. The two little pegs drop into the fans so it cant move or shift around after it is slid in. Print with the little pegs up. Just…
I connected https://www.thingiverse.com/thing:4906583 with https://www.thingiverse.com/thing:4137415 . It fits for Black&Decker jigsaws CD300 and KS532E. 2022-01-28 Update: I have added the Fusion 360 files, but please note, I am a…
Print in your translucent filament of choice. I would not use the higher power settings on the flashlight if you are printing in PLA as the flashlight does get hot enough to deform standard PLA at those settings. the pictured prints were…
Very simple mount for the Seeed Studio SCD30 CO2, Humidity & Temperature Sensor https://wiki.seeedstudio.com/Grove-CO2_Temperature_Humidity_Sensor-SCD30/ Learning how to use parameters within Fusion so I've included the .step files in…
rotate the soldering iron to insert and to extract it
D30 WITH LOGO OF GYMNÁZIUM ŽIDLOCHOVICE. Teachers in our school will use it for choosing the students
The door spring on our dishwasher snapped which then broke the plastic roller. I was able to source a replacement spring, however unfortunately, the roller for a door spring has been discontinued with no replacement (part number:…
Při vývoji byl kladen důraz na: Stabilita (nepřevrhnutelnost) Pro plechovky průměru 30 mm (+/-) Variabilita průměru, proto ty pružné segmenty Rychlý a nenáročný tisk Materiál PLA Cokoliv Tisk na Mk4 0.32 SPEED Input Shaper Tryska 0.6 mm…
Wall mount for a Gardena S30 / SD30 Sprinkler. Normally this sprinkler is mounted with the threads on a tube. I want to connect it to a hose, so to mount it I designed this bracket. 4x M5x30 for the clamps.
Uses 6x2mm magnets. Two different sizes, standard and larger when you want a bit more coverage. The magnets stick out just a tiny bit but if you don't like that you can scale the z height.
This is an ergonomic grip for GVDA GD300 soldering iron. In addition to providing a comfortable grip and better thermal insulation, it kind of acts as a stand by preventing the soldering iron tip from contacting the surface where it's…
this is a qick mod to mount a pair of Sennheiser HD300 over-ear headphones to your Pico4. I'll start by saying that this is obviously a compromise, by maximising audio quality, sound isolation and comfort with over-ear headphones, the…
A camera case and arm to attach the innards of a Microsoft HD3000 to a Prusa i3 MK2 bed for smoother time lapses. Uses a wide angle lens that can be found on ebay/amazon. The one I got: http://www.ebay.com/itm/252732341201 Print Settings…
designed for the "Teslong TD300"
Phomemo D30 holder for openGrid. Attached with a openConnect connector. Print the D30 holder (I printed it vertically with supports at the bottom) and one set of the openConnect snaps. You can use other snaps, I've just included one set…
Made a simple cover for my PRINCORE DRYER-D300. Hope it may help someone some day.
All credit to Andrej_B for his file, i just removed the wall for the other slot and mounted it on a grifinity box.
Compare your screwdriver to the photo! Under the same model name, there are two types of screwdrivers with different bit holders. This is a simple Simple 1x5x3 Gridfinity bin for the Total TACSD30086 ratchet screwdriver. It has cutouts so…
Model with a reinforced base humidifier cap for Corob D300 (for the colorant dispenser). Printed on a Bambulab X1, 3MF profile and the STEP file are also available for download.
By using this dosing aid, you can create a 4 %-solution for your EMAG EMMI-D30 ultrasonic cleaner with ease. Just fill it to the brim and dump it into the half filled tub of the cleaner. Then fill the cleaner the rest of the way with…
This is a small retention clip meant to be used on Labelmoto branded label/sticker dispensers. It was designed to fit specifically on the LD3000 model, but may fit other Labelmoto models as well. This clip will fit snugly onto the side of…
A mount for the Mosaic Palette 2 on the Ultibots D300VS delta. It should work with any delta that has a slotted extrusion on the exterior corner of their printer. The filament can then feed from the floor, freeing up valuable desk space.…
My modifications to the D300VS+. Great printer these modifications just trim up the printer nicely. Also includes files I used to calibrate my D300VS+ after the build. Highly recommend the Hardened Hob Gear for the Titan Aero, I was…
My Dust cover for the Ultibots D300VS+ inspired by AndyFromSpaces dust covers for the Micromake D1. Added a step and FreeCAD file so that others could use it to modify for other large 2040 vertical slot based delta printers. This is part…
This 3D printable mount is designed to securely attach a D3000 discone antenna to a standard camera tripod. It fits the antenna snugly and features an integrated PU60-style quick release plate on the bottom for fast and convenient…
i design a car mount for a iphone 13 mini
Still was having issues with getting good bridges and overhangs at fast printing speeds so I decided to just go with brute force cooling with two 5015 fans . Works like a champ, can work too well. Make sure your hot end has a sock and you…
Simple replacement battery cover the the Godox AD200 and 200 Pro, Will also work on the Pixapro version as hey are the same product. This should work in and filament. I used PLA
My Phomemo D30 sits at my desk and I essentially don't move it, so I wanted a stand that lets me turn it on/off but it otherwise stays out of the way. Features: Stands flat on a desk, upright. Access to the button as well as tape access.…
This is a ball-cup arm upgrade set for the Ultibots D300VS, for use with Trick Laser/SeeMeCNC fixed-width barbells and Trick Laser Ball-Cup Arms, as well as the stock Ultibots micro extruder. It should be possible to use this set with…
Das Modell ist die Frontblende für einen Deutz D30, dahinter ist der Luftfilter verbaut. Ist Ersatz für die Messingblend. Am besten aus PETG drucken um die UV Verträglichkeit zu verbessern. This model is a replacement for the front cover…
A stand for the the Gens Ace iMars D300 charger. Angle is 35 in the voroni version, 33 in the solid version. 150mm long 40mm tall 85mm deep 2.5 mm wall thickness https://genstattu.com/gens-ace-imars-d300-charger
Phomemo D30 holder for openGrid. Attached with a openConnect connector. Print the D30 holder (I printed it vertically with supports at the bottom) and one set of the openConnect snaps. You can use other snaps, I've just included one set…
i recommend printing this out of petg, print as oriented when importing the files into your slicer, the main adpater needs support. You can print a retaining ring from another click and clean model, or buy one from the bosch spare parts…
My Phomemo D30 sits at my desk and I essentially don't move it, so I wanted a stand that lets me turn it on/off but it otherwise stays out of the way. Features: Stands flat on a desk, upright. Access to the button as well as tape access.…
crépine a mettre dans l'exutoire de trop plein de la piscine. cela évite au souris, feuilles, insectes de boucher le tuyau d'évacuation de trop plein strainer to put in the overflow outlet of the pool. this prevents mice, leaves, insects…
This is a support-free, airflow-optimized angled stand designed specifically for the Gens Ace iMars D300 Charger and also compatible with the older iMars Dual model. The stand holds the charger at a 40° viewing angle , making the screen…
NOTE: Made specifically for the Essenza D30 manufactured by De'Longhi, the model with the angled body and slotted drip tray. Ensure this is your model before printing. Girlfriend was using an awkwardly shaped cup that teetered the edge of…
Element holding headphone - fits rigth and left side. It is not perfect but it works just fine if you happen to break your headphones. Feel free to remix. Skechup file included! Print Settings Printer: Anet A6 Rafts: Yes Supports: Yes…
Pegboard Hook for Phomemo D30 label printer. Needs supports to print correctly.
crépine a mettre dans l'exutoire de trop plein de la piscine. cela évite au souris, feuilles, insectes de boucher le tuyau d'évacuation de trop plein strainer to put in the overflow outlet of the pool. this prevents mice, leaves, insects…
Juego de la rana infantil con 8 fichas, es un juego de precisión de origen egipcio que consiste en meter las fichas en la boca de la rana, gana el que sea capaz de introducir mas fichas en la boca de la rana. Utilizo un PLA color verde…
This one I made for use with the MMU2, because the filament I bought uses spools that are made of cardboard (a little deformed), so it was dificult to use with the spoolholder provided by Prusa. Anyway, it works fine with 30 mm diameter…
table cable cover d30mm Print Settings Printer: FBG5 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: MasterPlaster ABS Orange Category: Office
Holder for the Phomemo D30 Label Maker Machine. Has recessed holes for attaching to cleat or wall. I printed in PETG to withstand the garage temps in NC.
