Counting matching models…
You can also check out my BTTF3 DeLorean with LEDs: cults3d.com/:1421403 If you like the DeLorean with lights you may want to check out my Death Stranding Bike with Sam and LED lights!…
Summary This is a model of a DeLorean DMC-12 in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhausts :) After printing, the model can be assembled with the help of integrated connectors.…
This Delorian can be printed in one or two colors with not much fillament at all. The color change happens all at one layer at 2mm so no ams is needed. Be carefull not to cut tabs, just the sprues. For assembly, simply cut away sprues and…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
Back To the Future : Delorean Time Machine
Llaveros con cambio de color
I own a DeLonghi Magnifica Evo and let's be honnest, if the coffe is delighting, the coffee bean container is so small you can't put more than 250 or 300g. And you always have to manage half a packet beside the machine, because you just…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
The Dedica is a neat little espresso machine with a small footprint, perfect for small kitchens. But with all the parts required at armslength for making a good coffee, like portafilter and tamper, etc., your morning workplace quickly…
Are you tired of dumping coffee all over your counter every you time dose grounds into your portafilter? Do you have a 51mm portafilter? Well then I made this dosing funnel just for you my friend! Introducing DOSING FUNNEL FOR 51MM…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…
We had problems with coffee grounds molding in the container of our coffee machine. There are other sieves out there, but they are all too loose or/and the grid is too wide, allowing coffee to fall through and also mold. If you're facing…
Great model designed by Crazyjunkie on Thingiverse. No supports necessary, printed in Prusament PETG at a 0.2mm layer height. If you decide to print it, I'd greatly appreciate if you posted your make. Happy printing.
Subi los archivos en 3mf y stl para que usen el que mas les guste.
Lo imprimí en capas de 0,32 con boquilla de 0,4. Quedaron muy bien.
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
hueforge delorean blueprint
Mini-DMC DeLorean: Print-In-Place Based on the real-life DeLorean vehicle (scaling is not accurate!) Print-In-Place 3D model (wheel rims should be flat on the bed) Leave the model in the default orientation. Printed with a .4mm nozzle,…
This is a funnel designed for the Delonghi EC685 espresso machine. It makes filling the coffee into the carrier child's play. Lock on - fill in coffee - press coffee - take of funnel - lock into machine - GET A COFFEE! No hassle any more…
Delorean Remix Modded in Blender Print-In-Place 3D model Printed with a .4mm nozzle, 40% infill with a layer height of .15mm on an Ender 3 V2 Author of the original piece: Delphant Thank you so much!
Bring one of cinema’s most iconic vehicles to life with this highly detailed, 3D-printable display model of the DeLorean DMC-12 Time Machine from Back to the Future. Designed for makers who love precision, nostalgia, and eye-catching…
This model is intended for Dedica EC885 with naked portafilter. I added a central hole for coffee to drip and a smaller hole to purge a steam wand. The original model this remix is based on was for EC685, so it will work for both, but the…
I got sick of running out of coffee beans all the time, so I created an extension for the coffee bean container. As I am switching from Fusion 360 to Shapr3D, I thought this is a nice experiment in modelling with it. Of course, I did not…
My favorite movie vehicle ever! DeLorean from BTTF and Ready Player One. www.youtube.com/wekster
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
Lego 10300 (Back to Future) stand, the individual parts must be glued together.
The holder is for the “Filter holder”, the 1 and the 2 cup Filter and the “De'Longhi DLSC058 Tamper” but the Plastic Spoon/Tamper also fit. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle, with supports. Using Extrudr…
printed in PETG, extension needs full support, cover can be printed without support. Category: Kitchen & Dining
Remixed base for Delonghi Dedica EC685 bottomless portafilter with 26mm IMS Filter Basket
The Dedica is a neat little espresso machine with a small footprint, perfect for small kitchens. But with all the parts required at armslength for making a good coffee, like portafilter and tamper, etc., your morning workplace quickly…
He diseñado unos cuantos modelos de recogecables para que imprimáis el que más os guste. I have designed a few models of cable ties so you can print the one you like the most.
DeLorean Back to the Future Wall Art. Printed with 1mm nozzle at 1mm height with TPU. Check out other wall art models in my profile!
The bean tray of the DeLonghi Magnifica S is small. WARNING: Some people are reporting problems, I printed this without issues but some people seems to experience fitting problems. Take a look at the comments see for yourself. If you…
Requires 2 x Lego Connector Peg/Cross Axles and connects to the wall via a single screw. Prints in current orientation with no supports. Please note the layer lines are running in the direction of the stress forces so print with a strong…
Printed this in black PETG This model includes slots to press in Ø10 x 3 magnets to magnetise to the top of coffee machine. Fits this spray bottle…
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
designed this to be able to fit two cups of coffee at the same time. it's a 2-part print: 1. the main part which is the wide container 2. the top tray. printed for myself with “Voxelab” PETG-CF Marsala. for the widened tray I printed…
Extension for the Delonghi Eletta Explore. The extension has small hooks and thus holds securely. However, I recommend an additional extra attachment with tape (no one wants to pick up all the beans from the floor ;) ). No support…
A remix of Otvos5i custom Dedica driptray for bottomless portafilter. I also like to use bottomless portafilter for my Dedica. This drip-tray is a great addition for the machine. I added a bigger hole in the middle that the last drops can…
Model should be printed in specified orientation without supports. Requires 2 x Lego Connector Peg/Cross Axles and requires 2 x screws to attach to a wall The storage easily fits all extra parts for the model Please note the layer lines…
Chess Set 3D Model
Zvětšený zásobník na kávu pro kávovar Delonghi ECAM. Po instalaci tohoto vylepšení je možné do zásobníku na kávová zrna přidat více než 1 kg kávových zrn. Model je plně kopatibilní s plastovým průhledným krytem dodávaným s kávovarem a…
Lego Back to the Future Delorean (10300) Stand This stand works better with LED kits by grabbing the outer portion of the rails. Also works well if you don't have an LED kit of course. 15 degree forward tilt, 5 degree side tilt Forward…
VIDEO: Este diseño es un MOD para otro de mis diseños. Para hacer el coche completo necesitarás estos también: Chasis: https://www.printables.com/es/model/447947-chassis-110-adaptable-dks-basic DeLorean:…
There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…
Make sure your bed is leveled, and be very patient getting it of the buildplate.
Grinded coffee measuring spoon for Delonghi Magnifica s. As I lost the original spoon, I've borrowed an original one. And made a new model, but without needing support. I've printed one with 100% infill.
This funnel clamps onto the bayonet lock of the portafilter of a DeLonghi Dedica EC685. It prevents loss of coffee during filling and tamping. It is modeled off a third party bottomless portafilter with a slightly looser fit than the…
This model is compatible with the lego system.
This is a remake for DeLonghi Magnifica, it's more compact and with de logo in front. Instead to fill all the cup with 3 perimeters, I used the height and range modifier of PrusaSlicer in order to make more robust and waterproof only the…
Descaling Container for DeLonghi Magnifica Evo Enhance the maintenance of your DeLonghi Magnifica Evo coffee machine with this specially designed descaling container. This 3D model offers a perfect fit and easy handling thanks to its…
Needed a build plate holder that can be loaded from the side so I can put it on a shelf that has another shelf above it. Holds 5 regular thickness Bambu labs X1/X1C/P1P plates. STEP file included.
Toto vylepšení je určené pro kávovary řady Delonghi ECAM. Při čištění / odvápňování lze pro zachycení odpadní vody pod trysky kávovaru umístit buď větší sklenici, jejíž kapacita ovšem nestačí k zachycení celkového objemu čistící tekutiny,…
A fast printed accessory for the Delonghi Dedica. It uses the ledge on the top and a hole present below. The main purpose is to hold the original measuring spoon/tamper but it can hold the "filter-holder" (?) too. Only 4g of material are…
I designed it for my Delonghi Dedica portafilter tamping pad. goal was to design one that would match the rubber tamping mat. I intentionally keep the design the way that it is possible to use it as a standalone as well.
The attachment that comes with the Dedica Coffee Grinder has too many gaps and lets coffee grinds get everywhere when grinding. It slides into the grinder exactly like the original attachment, a clicks into place and stays in firm. You…
modelos escalables tanto para uso real y practico como para decoración o llaveros
DeLorean Edition – HyperX Pulsefire Saga This exclusive edition is a remixed cover for the HyperX Pulsefire Saga mouse, based on the original model from HyperX Pulsefire Saga - Shells and Buttons - Official by HyperX | Download free STL…
Grid to place into the DeLonghi Magnifica S container to avoid mold.
I was inspired by you know what movie... have fun!!
DMC Delorean, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Introducing a true work of 3D art! 🎨✨ This 3D-printed piece captures the essence of the iconic DeLorean DMC-12 in all its glory. With meticulously designed details, every element highlights the legendary car that traveled through time. 🚗💨…
Escudo de Slytherin para impresora de multimaterial, en mi caso prusa i3 mk2 MMU1 o MMU2. No está preparado para imprimir las piezas separadas y después pegarlas. Print instructions 0.2 PLA MMU
Made fore the Delonghi Icona Vintage portafilter 52mm porta filter with 2 locking lugs Larger needle handle hole diameter for easier install Link for needles: https://s.click.aliexpress.com/e/_Dl6Knir
This is the ground coffee scoop which comes with the Delonghi Bean To Cup coffee machine. I have measured my spoon from a Magnifica ESAM4200 - this might be the same as used in other delonghi models. Print instructions Category: Kitchen &…
Introduction There are a number of 3D models for the logo of the DeLorean car, but I could not find the logo that is on the front of the car which is used in the movie "Back to the Future". So I decided to make it myself. The provided stl…
better to use PETG with 4 perimeters in vertical. No support needed. Works fine :) Category: Kitchen & Dining
This new drain prints in two parts: top and bottom. I advise you printing the top with PETG or ABS (for temperature resistance) and the bottom with any plastic you want (I used PLA). This modification allows you to put bigger cups and…
Overview This simple intake adapter lets you connect many Pinguino machines to a hose system without causing any damage or permanent changes. It attaches easily by taping it to the back of the intake holes using regular packaging tape or…
Stand for Hover Mode Hot Wheels DeLoreon (https://smile.amazon.com/Hot-Wheels-Machine-Die-Cast-Vehicle/dp/B00Z3FACAK?sa-no-redirect=1). Made to look like the DeLoreon is taking off. Pegs sticking up will slide right behind the wheels into…
This was one of my first 3D models I made. Not every part of the car is movie accurate, but it is easly printable and small.
Replaces drip tray so that you can fit a scale on the level under the group head
Just change color on specific layer in slicer to make it dual color. It is mandatory to use Arachne perimeter generator with standard size and 0.4mm nozzle.
EXCLUSIVE DESIGN BY TWIST3D MODELS Follow us on https://www.instagram.com/twist3dmodels/ Introducing the time machine legend, featuring an aggressive stance and a tooned low style! Includes: • All-in-one amazing STL file, ready for…
VIDEO: Este diseño es un MOD para otro de mis diseños. Para hacer el coche completo necesitarás estos también: Chasis: DeLorean: https://cults3d.com/es/modelo-3d/juegos/back-to-the-future-dmc-delorean-dukedoks
This funnel is made to fit the Delonghi two ears portafilter (ECP31.21, ECP3220, ECP33.21, ECP3420, ECP35.31, ECP3620). Dimensions: Inner diameter (small end of funnel): 52mm Portafilter outer diameter: 63mm
DeLorean DMC12 Time Machine from Back to the Future, wall Art, can be hung or stand alone
ENGLISH : remix of coffee tank extension for DeLonghi Magnifica S https://www.thingiverse.com/thing:6620804 to add the holder of the ground coffee scoop. FRANCAIS : remix de l'extension de réservoir pour Delonghi Magnifica S…
Simple and elegant car wall art of DMC Delorean back to the future.
I got tired of my portafilter being unstable and having the spouts touch the bench. So, I made this stand. The spouts nest nicely in the base and the extended arm cradles the handle for a level portafilter. The spout are cut out to each…
A small espresso knock box designed to fit on top of the delonghi dedica. Needs a short length of wooden dowel (I used some scrap oak dowel). Mine was 9.75mm diameter. But I have included versions for 8, 9.75, 10, 10.25, 12mm dowels.
Simple wall mount for portafilters for DeLonghi Dedica series and similar (biggest Diameter of the seeve 61mm). Includes slots for three portafilters and three seperate seeves, a place for a tamper and some space for other utensils. Two…
Print BOM: 1x House Side (Rivet or M4 Nut 1x Exterior Vent Cover 2x Clamp Hardware BOM: 6x Wood screws (~20mm in length) 2x M4 flat head screws 2x M4 Rivet nuts or Hex Nuts Wood as needed to fit your application I designed this as a pass…
Layer height isn't super crucial; pics are .2mm. .3mm is fine. Probably want at least 30% infill.
Holds your tamper in a convenient position Category: Kitchen & Dining
Conector Esquinero para Carpas Indoor – 3 Vías (Modelo 3D) Diseñado para estructuras ligeras, este conector esquinero de 3 tubos permite unir perfiles de forma firme y precisa, ideal para carpas indoor, sistemas modulares o soportes…
Modelo 3d de Santa Sofia de constantinopla
The 3d model is designed for a printplate with the size 220x220mm.
Requires for drip tray to be removed. This is a v1 so i will be working on better looking one
I am building a mini back to the future DMC delorean from a 1970s Fima jonny panther(A very rare car) and had to make the logo ..... so if you need it its yours for free… i don't own the copywriter to the font or the logo so please do not…
After creating a hexagon-style drip-platform for the Delonghi EC685 (to published yet), a hexagon-style tamping station must be created. For my portafilter the fit is quite snug. If you want a more snug/loose fit, or your portafilter has…
MÁS PARTES DE ESTE PROYECTO: https://www.printables.com/@DukeDoks/collections/1657937 Este diseño es un MOD para otro de mis diseños. Para hacer el coche completo necesitarás estos también: Chasis RC:…
I remixed the Delorean model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
A coffee funnel and tamp for a DeLonghi espresso machine No supports required.
I designed a good fitting water tray for rinsing and cleaning for DeLonghi Magnifica S. Approx 2.7 L capacity.
De'Longhi Update for two cups This is an adapter for our “De'Longhi Dedica Style EC 685.M Espresso”. The 3mf-File was use for this print. I used PLA with a Prusa Mk3s MMU2s and had no problems. The settings for the bridges need a 90°…
Design is heavily based on this model by @HuMa_1372637 , so props to them! Remade their model from scratch to give a little reinforcement to the print as it looked a little weak to me. Install at the bottom of your coffee grounds…
![Umikot (52mm 2 lug Remix) - WDT Tool [Delonghi Icona Vintage]](https://media.printables.com/media/prints/601840/images/4788734_631ba4c7-2476-4606-b1fc-b154c6b5211a_2cdecddd-a72f-430a-be3f-bc115fa7711d/icona-vintage-wdt.jpeg)
