Counting matching models…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height:…
This little Red-Eyed Crocodile Skink is the closest to a real-life dragon you can get... seriously, Google them! If you want one for yourself, here's your chance! It's fully articulated and likes to relax on things with it's very chill…
If you need a cute desktop figure, then the thick crocodile is just the thing for you. He will remind you that it is always snack time. He is 68mm x 53mm x 50mm Printed in 0.08mm layer height Without support 15% infill The model creator -…
dont use brim, be careful with scaling down
This is a remix of DaVinci2000's Crocodile bag clip https://www.printables.com/model/243848-crocodile-bag-clip If you like this model, please give a like to the original. I did not create this. I only added a face. It works very well. I…
Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This time I have decided to create a creature that actually exists… Let me present to you Conrad the Crocodile! The…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wally and the Sneaky Sandwich 🐊🥪 Wally isn’t the fastest swimmer or the strongest croc, but he’s the sneakiest! One sunny afternoon, he spotted a picnic basket left unattended. Quietly, he crawled up, snagged a sandwich, and replaced it…
This model's fully articulated at all joints, including along the spine. It sits comfortably on your hand and also likes resting on things. I've uploaded both the standard and NoMagnets.stl/obj files so you can choose to print either the…
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤. Just a little friendly crocodile 🐊 keychain, based on Coco. Print suggestions & troubleshooting Brim is enabled but if you have excellent adhesion to the print…
The source marked this model as adult content.
The source marked this model as adult content.
The source marked this model as adult content.
🐊 Articulated crocodile🐊 🛠 Print Settings & Recommendations Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 5% Supports: ❌ No supports needed! 🎨 3 Ready-to-Print Profiles Included: I’ve prepared three different print profiles so you can…
Bag clip in the form of crocodile head. Dimensions: length 37.6 mm; width 16 mm Print settings: Filament: PETG (don't use PLA, it will deform over time) Layer Height: 0.25 Line Width: 0.45 Wall Line Count: 3 Top/Bottom Layers: 0 Fill Gaps…
Print Settings Material: Prusament - PLA Opal Green / Prusament - Pla Gentleman Gray Nozzle: 0.4mm Layerheight: 0.10mm Support: Build plate only. (If you want, the bottom of the model will be a little better) Post Process Not necessary
My brother in law needed this for a cosplay costume. I didn't like the available hooks on thingiverse so I made my own using onshape.com. Assembly: The hook screws into the cup. Printing: There is a handle inside the cup that you cannot…
Bombardiro Crocodilo created in blender
The source marked this model as adult content.
If you like this one, check out the shark version too. Recommended print settings: The tolerances were designed for 0.2mm layer height printing and for the original size of the model. Please use my shared print file since using a…
✨ Hey youuu! Wanna help me make even CUTER flexi toys? 🥺👉👈 Supporting me on Patreon means the world and helps me create more adorable designs for you guys! A huge THANK YOU to my lovely Patrons who already support me! You are the real…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Say hello to this tiny, adorable flexi crocodile! 🐊💚 No supports needed, it only takes a quick little wiggle after printing to get those links moving smoothly. A cute, pocket-sized companion ready to crawl right into your heart! 🦎✨
Join here to get access: https://www.patreon.com/kogi3d Hey everyone! A brand new STL file is now available – an articulated crocodile with smooth, flexible joints and a snappy design. Perfect for your next 3D print and fun to pose!…
This is the hardened version for hard fingers or flex filaments :)
🌼 Spring Bouquet of Easter Daffodils Treat yourself or your loved ones to a 3D-printed bouquet of daffodils! This step-by-step guide walks you through printing, shaping, and assembling – for real springtime moments. Show off your skills…
Print Instructions & Recommendations: Basic tree support is recommended for the current orientation. Both separated parts or the unified models can be printed with their current orientation with the following settings: Support Type: Tree…
The source marked this model as adult content.
Bombardiro | Bombardilo | Bombardino Crocodilo from brainrot tiktok meme. In blend file you can add propellers cylinders that disabled in this project
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 50% scale or larger. This doesn't…
I tried the dilator by @Rieva_1598535 but it pinched my septum even when scaled up, so I redrew it based on the sketch provided. I also made the ‘paddles’ a bit deeper and reduced the depth of the ‘frame’. The F3D file is included in case…
Bombardiro Crocodilo in high details Supports must be enabled Dimensions: 80 x 69 x 24 (mm) I used around 11 grams of filament in total
Eyeballs for your Red-Eyed Crocodile Skink!
Baby Crocodile Clay character kawaii 3D Model Discover the opportunity to create custom designs at an affordable price! If you have a specific idea in mind, I can help turn it into a unique design tailored to your needs. Contact me…
Odile is a character from the ballet "Swan Lake". She is the daughter of Von Rothbart, the evil sorcerer who turned the Princess Odette into a swan. Odette has a champion in Prince Siegfried who is in love with her, but Odile is sent by…
Meet Coco, The Articulated Crocodile! A nice print-in-place gadget, Easy to print, available in one-color and bi-color versions (one filament change). Print suggestions & troubleshooting Brim is enabled but if you have excellent adhesion…
Here I present you the cute Crocodile Figurine Easy and fast to print without using any support structures I also printed this one wth glow in the dark Filament and the result is amazing The flexi Crocodile Model is avaible on Cults3D or…
A cute articulated armadillo lizard
This is my artistic rendition of a Dilophosaurus skull. I tried to make it as realistic as possible with reference materials, but I'm not a paleontologistm so I wouldn't use it for serious business or research! Printing instructions…
Love my designs & wanna support what I do? Join my cozy little fam on Patreon 👉 patreon.com/draftaxis 💞 Your support there keeps me motivated and helps me create even more adorable models for everyone! 🌸💪 🦖 Meet the CUTEST crocodile ever!…
Croco is here with his big eyes, plump tail, and chill swamp vibes! Just 24 minutes to print and zero supports needed – he’s your new speedy reptile companion. ✔ Includes: • 1 file – no fuss, no supports • Super quick 24-minute print •…
I wanted to make it multi-colored, so it took me a while to figure out the order of the parts from pictures and YT video from the original creator. In case anyone want to do the same, I upload my separate files for each color.
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
For a more convenient knob, insert a magnet into the slot. The magnet should be somewhere smaller than 0.315 in.
I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…
A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.
a beautiful Deffodil with a stem that is suitable for decoration or as a gift. print the parts separately. !assembly requires glue, ideally instant glue or other plastic glue! It looks beautiful as a bouquet in combination with my other…
"What are you Hungry?. I just fell down a hill. I'm soaking wet. I don't have any food. I have no food on me. I have nothing on me." -Dennis Nedry Dilophosaurus is a genus of theropod dinosaur that lived in what is now North America…
V2: Adjuster is now indexed in reverse (increase in weight increases in index). Arrow and plus/minus signs are wider.
This model is compatible with the lego system.
The source marked this model as adult content.
The source marked this model as adult content.
Remixed model of Cute Faty Crocodile made into keychain
I started reloading 6.5 Creedmoor using H4350 powder on a Dillon 550C. Since H4350 is extruded, the Dillon powder drop varies up to 0.3 gr of powder per load for coarse extruded powders. This means that each case isn't receiving the exact…
This model is compatible with the lego system.
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
HO scale dilapidated brick two story building. This is mainly meant to be used as a facade building. Use white tempera paint for a really great mortar effect.
The Flexi Crocodile is a fantastic project for those starting out with 3D printing. It’s a single-piece model that’s cleverly designed to have moving parts without the need for assembly. The crocodile's body is made up of interconnected…
This decorative model at scale 1:32 is the famous Swiss Railways Crocodile locomotive born in 1919 for pulling freight trains through the Gotthard mountain. This CE 6/8 iii is the third serie built in 1925-1926 and numbered 14301-14318.…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…
The source marked this model as adult content.
CORDILLERA | Cutting-Board Rack Introducing "Cordillera," your kitchen's new best friend. This 3D printed cutting-board rack combines elegance with functionality to keep your cooking space organized and stylish. Say goodbye to clutter and…
Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…
I keep dropping those small locator buttons on my Dillon XL 650 reloading press... This tap/handle is making my reloading life a lot easier. Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time. >>…
Easy to make a cute Crocodile keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…
I designed this case to provide both protection for the Basys 3 board and to eliminate handling the lead solder joints. All of the I/O is easily accessible. The base has four 3.5mm tall standoffs to allow room for the solder joints & pins…
barandilla finger board recomienda hacerlo un poco mas grande de las medidas originales del modelo o al gusto
Low Poly Capybara on Sleeping Crocodile is a playful and unique model in my series of sleeping low poly animals. This eye-catching design prints in one piece with no supports needed. Bring a touch of fun and calm to your space – perfect…
DAFFODIL Decor Carefully remove the supports using clippers. One by one, in order. Start from the very top and with the thinnest ones. Take your time. Do not pull them off forcefully to avoid damaging the model. Printed with fuzzy skin…
Dillon Powder Measure Label I created this powder label to slide over the clear plastic tube on a Dillon powder drop. A label can then be inserted into the main body. I have attached a label I have created already. If you need a label…
¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 10cm
The source marked this model as adult content.
I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary. I designed this version so the pick-up end of the tube would just…
Figura Remix de los memes de Tiktok Bombardiro Crocodilo
In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…
If you want to support me, you can send me some crypto and I'll buy a watermelon usdt(TRC20) - TPHUvYZXHKuB6Pj7wavXpkKApEzDJC83uN bitcoin - bc1qxh24prkt4mn6qv9jpyvwggnqd5nkrnx3qqsg94 ethereum - 0x9338A883Ac1bb7c75d7f6ca1A7D53c4021523369…
Hello everyone, This is my design for a Dilophosaurus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
I did not print this. I added a hole with a heated drill bit, so I figured I would remix it to add the magnet hole in the tail. Category: Sculptures
