Counting matching models…
I could not find a profile for IIIDMAX filament so I created my own. I tuned it with Orca Slicer calibration tools. Temperature, flow rate, pressure advance and max volumetric speed was calibrated. I hope this helps someone. I welcome any…
Updated (2024 Nov 24) - Several people were asking for my Z-axis parts, so I'm uploading them. The bed required 10mm steel threaded balls to be mounted in the front corners and rear center. Depending on the thickness of your bed, you will…
Nice christmas/winter themed model of a Canyon Speedmax cf timetrial bike. Perfect gift idea for that one special friend who's a huge bike nerd or triathlete! (or for yourself) No matter if you're the outdoor-cycling, or ZWIFT kind of…
Model of a Canyon Speedmax CFR with fast and fancy wheels. Perfect style element for every cycling enthusiasts home! Or perfect as a little gift! Designed to be printed flat with supports (let me know if you want a supportless version!)…
To keep the files size down, there is only one wheel shaft, you will have to print 4 of them, one right wheel and one left wheel, you have to print 2 of each. And one main axl, you will have to print 2. Suggest you scale up to the max…
Description The model allows to use the screw holes in the back of the Canyon Speedmax Seatpost SP0048 to attach a Garmin mount. Model Tests Model was tested with PETG. Screw holes are intentionally a tight fit. For the Garmin Adapter,…
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % SDesign-Speed is a top-tier triathlon and time trial bike with a carbon aerodynamic frame, integrated storage for tools/food, and an aggressive riding position.…
This is simple wrench for removing/tightening the fuel filter housing cap on a Holden RC Colorado and Isuzu DMax (2008-2011), where the filter is located underneath the vehicle next to the LHS chassis rail. The wrench has a hex nut of…
This is still in development, but some people asked about it. Updates will follow as I work towards a final version. This is a refined and optimized version of my previous Ender 5 ModMax design . I was looking to improve three aspects of…
One of My models from My Road Rage series Printed on the Elegoo Saturn 3 ultra Scale up to the size you need. All models now available https://www.cgtrader.com/designers/dna001 Please leave some comments good or bad, thanks Check out My…
I couldnt find a filament clip that properly fits the IIID Max spools, so I threw this one together. Print at .20 So it seems as though this is also a perfect fit for the Bambu plastic spools. It just snaps right on!
Canyon bikes use a small piece of plastic to cover the rear thru-axle on their bikes. This is that cover, for the Speedmax CF time trial/triathlon bike. I was contacted by Kylexandr on Instagram who found the axle cover I had done for the…
I needed a way to prevent IIIDMax and Elegoo spools from becoming off centered while printing, this solves that issue. Modified: from @humebeam Pyhton spool holder spool-holder-top-print-4pcs-1.3mf spool-holder-bottom-print-4pcs-1.3mf…
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid…
MadMax - the crazy-simple toolchanger conversion for your E3NG
These are the X gantry parts for the ModMax upgrade if you're using the FYSETC lightweight gantry for the Zero G Mercury One for the Ender 5. Updated - 31st Dec 2024: Added new versions of the top sections for more linear rail clearance…
I designed this frame box for my Speedmax CF SLX 8.0 SL (Size M). It sits right above the bottom bracket and has a sliding lid on the left side. It integrates with the Elite Crono CX aero bottle. I printed the box using PETG-CF and did a…
I wanted to run a shuttle that contained the x endstop and z probing independent of the toolheads on a madmax system. I was also having trouble getting the toolhead probe working reliably enough and this was an easy way around that. The…
A small collection of parts I designed for my Ender 5 that I upgraded based on the ZeroG Mercury One and SilentMobius MaxXY mods. Parts include: Cable chain mounting tower (2 variants with different cable management) Cable chain mount for…
Not really a remix but a modification/addition. Created light inserts for the chest panel's rectangular holes. These fit tight and have a brim to glue in place. Also designed to be thin enough with standard PLA to allow light through.…
Modified version of the DragonBrick cowl . I slightly increased the wall thickness around the screws that hold the printhead in the dock for MadMax Toolchanger The overall geometry and compatibility with the original design are unchanged.…
Dragonburner Toolhead Shroud for MadMax Toolchanger (Left and Right) I wanted to use the standard Dragonburner toolhead on my attempt at a MadMax toolchanger, so I remixed Chirpy's V8 of the Dragonburner toolhead to include the holes for…
I was unhappy with the stock bento box on my Canyon Speedmax CF SLX 8.0 SL (Size M), since I did not like the opening and it was always a bit too small. That’s why I designed this 3D-printed one with a magnetic hinged lid, which is easier…
a quick design I made for my first gen dmax that clip onto the back of the centre console. doesn't work if you have a centre console lid. you need 2 m6x20 bolts with a socket head on them. print in asa or similar material as pla with fail…
I printed this out with 5 walls, 5 top/bottom layers and 40% infill. ABS/ASA at a minimum. I personally print my carriages in PET-CF and anneal for high heat tolerance since my bed can get to 130c and that causes abs/asa to get droopy.…
Compatible with all toolheads supported by MadMax: DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick Keep your nozzles clean and your tool changes smooth with this dedicated nozzle brush holder,…
The engine cover/hood key for my mini excavator was not sized well and I was worried it would strip over time. I printed this one to replace it. It fits much better than the original. Example printed vertical (key hole down) in PLA-CF…
Modified to only use the upper bolt and a zip tie for the top of the mount. Useful if you have the seat post inserted below the bottom mounting hole. Screw in a Garmin mount to the holes after printing. Radar mounts upside down for…
Added “Canyon” logo and made a cutout on the back, for the axle. At the end i tried to polish it, with fine sandpaper to get rid of the printlines. My Speedmax is from 2022.
Burder Roadmax Traktor Kupplungs-Adapter/ trailer hitch adapter
Button that I made in thinkercad for the button contest.
MadMax Dock Front Extrusion Relocation Bracket – 20mm Forward / 44.5mm Down For Mercury One / Ender 5 Frames This relocation bracket repositions the MadMax dock on Mercury One.1 or Ender 5 frames. It mounts horizontally to the front 2020…
One guy at the club at this car and searched for replacement of Front suspension arms for years without finding one. At the end, he gave me a sample, and I designed a part for this. The design is different at it is plain arm, but the…
My cat jumps on my server all the time to get up to the TV stand. She tends to jump on the power button unfortunately, so I designed this cover to block her from landing on it. Model can be remixed to fit other computer case designs.
Here is a Beetle car for the crash derby game. It has 2 parts: A base with the Weels, And the Main body. there is also a 3mf file if you want ti print it with a multicolor system.
Dragon Burner Toolhead Parts for MadMax Toolchanger A collection of parts for dragon Burner toolheads being used in MadMax toolchangers. I've included the parts that I've been working on to help convert my RigidBot CoreXY to a MadMax…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/cgZwmWAeGaW Print Settings Printer Brand: Anycubic Printer: All-metal Mega **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0,2 Infill: 40…
This is an experimental version of my Ender 5 ModMax v02 design that adds AWD (4 steppers for XY movement). These parts are incomplete and not fully functional yet. I'm posting them to share with interested people, show my progress, and…
3DMAX New Logo Some think that 3DMAX's old logo looked better than the new one. I will let you decide. It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can…
5.25" drive bay cover for a RAIDMAX Scorpio 868 case. Modeled after the original cover. Printed in PETG.
Models for both the v1.2 and v2. Best if used with the ITEV / RMX remix of the E3NG-Next. For V2, you MUST use the ITEV Tensioners, as those have the mounting holes for the docks. Hardware required varies accros versions. V2 dock…
Needed to add a cup holder to my excavator and made this. Uses the existing mount holes for the canopy. Printed in pla cf
Garmin varia mount, for canyon speedmax S31 seatpost, or any other seatpost with standart bottle mount mounting (64mm spacing). Mount fixes to the seatpost with 2 M5 DIN912 bolts 12mm lenght. Then you screw original varia mount insert,…
While I have many Dsipae tools, I prefer Madworks' chisels and handles. However, there are only a few Gridfinity models for this brand. As I organize my scale modeling workstation and storage, I find myself designing many prints for less…
Made the MadMax modifications to the cat cowl
I wanted to run a shuttle that contained the x endstop and z probing independent of the toolheads on a madmax system. I was also having trouble getting the toolhead probe working reliably enough and this was an easy way around that. The…
My old PC case lost a foot and wanted to sit crooked, so I modeled this foot to match the dimensions of the original.
Use Zruncho's original print settings from his GitHub: https://github.com/zruncho3d/madmax
MadMax dock for dragonburner shroud. Bracket mounts with the idler mount screws (requires longer screws) if you install the rear screw from the bottom you can place a nut on top to get better clamping of the bracket to the idler. and gets…
the model is mounted differently from the original. it does not have chamfers for 3mm diameter screws. mounted with the recess facing the user. any mounting technique PLA MATERIAL TEMP 215 TEM BED 60
My old PC case lost a foot and wanted to sit crooked, so I modeled this foot to match the dimensions of the original.
Use Zruncho's original print settings from his GitHub: https://github.com/zruncho3d/madmax
MadMax dock for dragonburner shroud. Bracket mounts with the idler mount screws (requires longer screws) if you install the rear screw from the bottom you can place a nut on top to get better clamping of the bracket to the idler. and gets…
In addition to the remix mods listed, there is a Logo LED carrier that allows for wiring on either side... this will allow simpler wiring by running the Logo as the first light in the chain. The extruder mount/board mount is meant to take…
Toolhead for my madmax ender 5 build its a work in progress BE AWARE THE DOCK NEEDS TO BE MOVED UP 0.5 OR 1MM RELATIVE TO THE ALUMINUM EXTRUTION IT MOUNTS TO
