Counting matching models…
I designed this upgraded Bag Coat Hanger (Heavy Duty Version) as an upgrade to my original design. Like the original model this version has been designed to be an easy support free print as long as you orientate it as shown in the bed…
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
Key Features: Extreme Load Capacity: Reinforced geometry inspired by generative design. Versatile Use: Dual mounting holes for secure wall attachment. Industrial Aesthetic: A perfect balance of strength and modern style. Print Settings:…
I designed this double coat hook with an added strengthening rib running through the centre of the part to add extra wall loops inside the hook. This is the same feature I've added to previous models I designed to increase their strength.…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
Heavy Duty Guitar or Bass Guitar Wall mount hidden Screw Design. Fix the bracket to wall then slot mount over Comes in - 53mm(approx internal prongs) - 53mm neck slot with 5mm wall offset - 53mm neck slot with with 10mm wall offset - 43mm…
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
I designed this Heavy Duty Grocery Bag Carrier with an added strengthening rib running through the model the same as the Bag Coat Hangers I designed. These strengthening ribs add extra wall loops in the centre of the part. That means the…
Living in an area with frequent winds (and while my previous hook designs were well-received) I realized I needed a version with significantly more mass and a deeper profile to keep shovels, rakes, and heavy brooms pinned safely against…
Mounting bracket 90 degree angled heavy duty version Use four countersink screw to mount it Print it laying down, the overhang should be no problem. To get it more sturdy, use denser infill 20%, rectiliner. Maybe 3-4 vertical shell…
Call of Duty Headphone Stand, slots together. Makes a great gift Print the top with supports touching buildplate @3DPrintBunny
Heavy duty wall bracket for shelves. When properly attached and shelf no longer than 35cm, the bracket can hold up to 100kg. (I carefully hung onto one of it with my body weight and it held without any problems. The holder can certainly…
Heavy duty, compact wrap for extension cords. Simple print - no adhesion, no supports. In-use photo shows a 14-gauge, 50' extension cord.
A hook designed to hold heavier objects. Print instructions Feel free to print it with 0.3mm layer height.
Spool Arm for side mounting the original spool holder It is designed to screw directly into the left support beam of the printer, for extra stability - other spool holders that float right next to the printer tend to sag quite a bit BOM…
YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…
Update: Now featuring multiple metric sizes, with imperial versions linked below. This is a replacement 5mm shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the…
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Hello. These are Makita 18V Battery & Drill Mounts that is developed through meticulous measuring and testing to get the design accurate and durable enough for everyday use. These were designed, developed, and printed for every day use in…
🛠 Bracket / Hook Profile (2D CAD Drawing & Dimensions) This model features a custom functional bracket/hook profile designed for strength, stability, and easy 3D printing. It incorporates a reinforced diagonal brace and precise…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
These are a set of coasters based upon the perks in Call of Duty Nazi Zombies. This is a remix of another user's set of 4 coasters that were painted to produce the color combinations. The main differences between mine and the original…
BOM: Printed with ROSA3D High Speed PLA Light Gray A comprehensive collection of solid, reinforced corner brackets designed for structural projects, DIY repairs, woodworking, or 3D printer frames. Key Features: Reinforced Structure:…
Hey this is a Wallmount i made mainly for my backpack which gets quite heavy at times but its also nice as an overkill headphone holder. You can use screws (4x30mm) or glue/double sided tape. Print on its side with at least 4walls (~2mm),…
Heavy Duty Wall Mount Tool Holder - Keep Your Garage Tidy! Tired of your shovels and rakes constantly falling over? This Heavy Duty Wall Mount Tool Holder is the perfect Quality of Life solution for organizing your garage, workshop, or…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
2020 Heavy Duty Sturdy Door Handle Overall dimensions: 20x45x140mm Suitable for:
A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
magnets 20x6x2mm (4pcs) 1,75mm filament Print instructions Remove integrated support then glue it. Use piece of filament for hinges.
Strong snowball maker for big snowballs. Print with a strong weather resistant filament (ABS, PETG, ASA, Nylon, PC). You can scale it if you don't want big (3.88 in.) snowballs. Use some support material to get best shape and finish. Just…
heavy duty over door coat hanger, there are tons of these things out in the wild, but there was something wrong with them all, either to weak or not wide enough to fit over the door to begin with! This works for me, hope it works better…
Hello. These are my Heavy Duty Wall Hooks that I have installed in my classrooms for hanging aprons and welding helmets. They have been used for the last 6 months, with very little wear and tear to show, holding up to every day use. They…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
Call of Duty Keychain Easy and quick to print, no supports needed @3DPrintBunny
Baking sheet stacker with long ledge and heavy duty base clip
This is a very heavy duty coat/backpack hook for cubicles with 3" thick walls. It can hold 30+ lbs when printed in PLA with 4 perimeters @ 200 micron layers. It has a saddle-shaped hook to keep the edges from digging into the handle of…
Not to be confused with the 1500 Megawatt Aperture Science Heavy Duty Super- Colliding Super Button. This version is going to be deprecated by the end of July, but it will also come with the full tutorial for added features and simpler…
Size Dimensions (Length x Height) Width / Thickness Mounting Hole Diameter Large 22.0 cm x 22.0 cm 4.80 cm 0.6 cm (6 mm) Medium 17.6 cm x 17.6 cm 3.80 cm 0.5 cm (5 mm) Small 13.2 cm x 13.2 cm 2.88 cm 0.4 cm (4 mm)
Insert your standard hex nut or screw, press-fit ⭐ Fits standard hex nuts from M6 to M12 -Designed with deep finger grooves and certain shape for maximum torque and grip -Optimized for hand tightening in tool-free applications Print…
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Durable practical hook. Print from PCTG, PETG or other solid material.
ghost call of duty anime statua
This is a more robust Hinge then my older design very simple will make one with more rotation abilities New and improved one ( https://www.thingiverse.com/thing:3959670 ) Print instructions Category: Parts Print Settings Printer Brand:…
Assembly list of non-printed items for pencil case 4 pcs - metal axis 26mm x 3mm If you looking for a version with a pencil sharpener
Printed with 3 perimeter walls around the bottom of the model and 4 perimeter walls around the hooks. 5% infill for the bottom and 15% for the hooks. Material used is PLA+ from Eryone. Print it laying flat on its side so that the layer…
Call of Duty Black Ops 6 - Cerberus Icon
This is a heavy-duty version of the clothes hanger that I designed. For lightweight items like shirts etc, the standard clothes hanger is more than sufficient and uses a lot less material. These are a great way to use up spool ends or…
Ghost - Call of Duty Posed model can be found here: https://www.printables.com/model/882148-ghost-posed-call-of-duty
3-Way Heavy-Duty Tent Corner Connector A reinforced 3-way 90-degree corner connector engineered for tent poles, tarps, and custom outdoor shelter frames. Designed specifically for high-stress applications such as camp kitchens and pyramid…
0.2 layer height 0.6 or 0.8 width for faster/ stronger print 3 or more walls 5 top/bottom layers 15 - 20% infill should be enough but at least 25% recomended
Introducing the Durable Dog Poo Bag Dispenser - 1,5h print for one set Say goodbye to flimsy waste bag holders with our Durable Dog Poo Bag Dispenser ! Designed to be attached to your leash like a keychain, this tough and unbreakable…
A tabletop mounting stand for IKEA Skadis frames with non-destructive mounting system of clamps instead of screws through the table itself. Chipp Walter's design which I modified from, was a perfect concept and base for this design,…
I looked at many of the existing designs and wanted a heavy duty spool holder for an overture 3kg spool I purchased. I printed the body out of PETG and the rod out of ABS with 6 walls and 25% infill. The end of the rod is trapped to…
Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? This 3D printable handwheel upgrade is here to revolutionize your sewing experience! Problem: The original handwheel on the Singer…
A very strong Carabiner, it uses the same mechanism on as the “origami carabiner” so I have linked the video for assembling this type of mechagnism. It can hold 100 pounds no problem but begins to crack at 120 and fully breaks ~150…
This is a replacement 1/4" and 3/16" shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the downward force of the shelf over a larger surface area, reducing stress on…
I have printed some nice keychain licence plate based on the dutch plates. As each number is unique I have added the fusion360 files and the instructions on how to create the plate in a few simple clicks. First download the (Kenteken…
!!!PLEASE WEAR PROTECTION!!! NOT A TOY!!! I CAN'T ACCOUNT FOR ALL THE DIFFERENT TYPES OF MATERIALS OR STRONG ELASTICS YOU WILL USE. SHARP PLASTIC FRAGMENTS FLYING AT YOUR FACE AT MACH 3 IS NOT FUN! PROTECT YOURSELF!!! Demonstration: (Weak…
Ghost Mask – Inspired by Call of Duty This mask is modeled after the iconic look from Call of Duty , designed to capture the intimidating and mysterious presence of the character. Whether you’re using it for cosplay or just as a display…
Bring the power of modern trucking to your collection with this 3D printable STL model of the Mercedes-Benz Actros Truck. This heavy-duty truck model is perfect for truck enthusiasts and fans of commercial vehicles, showcasing robust…
The original perks from Call of Duty zombies as plaques. Credit to Activision and Treyarch. Category: 2D Art
🧰 Heavy Duty Closet Pole Sockets A 3D-printable Heavy Duty Closet Pole Socket designed to support standard closet and wardrobe poles. This model provides a practical DIY solution for replacing or creating wall-mounted closet rod supports.…
3-way connector 2020 profiles / Corner Bracket HEAVY-DUTY REV2 - Giunzione a 3 vie per profilo alluminio 2020 Key Upgrades: ✔ Support-Free Printing : Optimized geometry eliminates the need for supports—saving time and material. ✔ Enhanced…
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
I modeled the Dutch row houses featured on the Stroopwafels box. These models are the same size as the picture on the box and roughly 1∶160 scale (n scale) to a real building. To create the models follow the steps below: Note 1: the…
Original description 2025-03-07 Mainly, see lewosh's description . Changes: The charger board is replaced with this one . Note that it only balances two of the three batteries, so you might want to get a secondary 2S BMS . Also, note that…
The Modern Minimalistic Hook (Heavy Duty)—a sleek and sturdy solution for your hanging needs. This hook combines modern aesthetics with heavy-duty functionality, providing a firm connection to the wall for hanging various items securely.…
🇳🇱 Welkom in Nederland! Welcome to the Netherlands! This model was designed by Dany Sánchez in 2015. One of the most recognizable historical architecture of many cities in the Netherlands and Belgium, especially Flanders, are thin brick…
DeWALT has a awesome heavy duty miter saw stand (link below) that is fairly easy to use as there are two clamps on the bottom of the miter saw that clip on too the stand. When somebody dropped the miter saw one of the black clamps on the…
This part was made using fusion 360 and my goal was to produce a moving part that was printed in place without further work. I succeded and found that this hinge was stronger than expected. I used 100% infill and it took only 2 hours. You…
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
Heavy duty tripod ball head for small and large format cameras. Needed something for a 6x7 camera and DSLRs. I printed this in Carbon fiber PETG. Make sure that there are no supports placed in the threads as this will mess them up. Firmly…
The tip is printed in red and snapped into the body The body is printed in a dark green The cap and spring is printed in black The tube is printed in blue and screwed into the body The push parts are printed in white
Sturdy design for 4 and 5mm shelf support pegs with 20x12mm contact area. Two 3mm holes allow you to use short screws to really tighten everything down securely while still benefitting from the exact height positioning of the peg. 1 peg…
Call Of Duty Ghost made into a Ghost O Pus , i printed this a couple times , it seems the mic is very thin on it so i supported all around the head and mic. Printed on a Ender 3v2 0.4 Nozzle Polymaker PolyTerra Pla Dark Army Green
Introducing the Wood Connector LTX, a heavy-duty solution designed to join rectangular wood pieces for creating robust and custom shelves. Engineered with precision, this connector features durable 3D-printed construction equipped with…
Meet the law of the lawn: the Police Gnome , your backyard’s fearless enforcer! With a stern look, a shiny badge, and a trusty walkie-talkie in hand, he's here to stop speeding bees, reckless birds, and any other critters breaking the…
Need clamps for your workshop? Print them yourself! This set of three fast-printing clamps delivers serious strength in PLA with a clever print-in-place rotating jaw mechanism that keeps jaws perfectly parallel—even when you're cranking…
Model of inflatable Heavy-Duty Boat
BOM: Printed with ROSA3D High Speed PLA Gray Mid-project and realized you're out of wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls and are perfect for…
This is an easy printable heavy duty hook. I use it to hang a ladder on the wall. The STL can be printed in the position as it is without support. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: No Resolution:…
This is a heavy duty coat hook, designed for 54mm thick cubicle walls. Print with many top and bottom layers, many walls, and over 50% infill if you need strength. Support my work: PayPal Donation: https://www.paypal.me/disizitstudios…
Ever wanted to have a beefy case to match your beefy phone? This case is for you! This case is designed for people who want to see their phone die from old age instead of from hitting the floor, using think walls and large lips to keep…
I made this from scratch to be compatible with the RostaP Multifunction Arm System. I wanted a stronger desk clamp and the ability to freely swivel the base without the teeth getting in the way. I also eliminated the need for one of the…
Just a simple wall hook for you to hang things from. Did a load study with 25 lbs or 11.3 kg on the single point you see in the image. The holes are 4mm for basic screws that go into dry wall anchors. I'd advise to use good dry wall…
Really liked the laptop stand from @emeremnd_296120 but for me it seemed a bit shaky, so I reconstructed and improved it a bit. I did the following changes Thicker base and rest (5mm → 6mm) Larger rest and base larger slotted holes to…
Upgrade the stability of your IKEA LACK furniture with this reinforced corner bracket, designed specifically to strengthen table legs and prevent wobble over time. This 3D-printable bracket wraps securely around the leg while anchoring…
WHAT IS IT? This is a dog tag that attaches to the side of your dog's collar, like a belt accessory. This is different from a traditional dog's name tag, as this tag is much more difficult for your dog to remove. If your dog is like mine,…
I was asked to design and build a simple yet heavy-duty cup holder for car windows. It uses the angle and weight of the drink or cup to clamp the holder securely to the door. Mounts in the car door window frame,
Heavy duty rear mudguard designed to survive the harshest conditions. Two strong pieces that connect through a heavy duty sliding joint. No Glue needed! Print and connect with; Standard 17 Zip Ties, Sizes; 4.6mm to 5mm width would fit…
As the title suggests this is a remix of the disposable plastic lock, I made it bigger, thicker and stronger, then removed the hole through it so it can't pass throug itsellf. Enjoy! (ignore my extrusion issues in the pics) In the last…
Heavy Duty Ukulele or Banjo Instrument Wall mount hidden Screw Design. Fix bracket to wall then slot mount over - MUST print bracket laying down so layer grain runs the length or bracket MUST print the mount standing up. If not, I can not…
Materials: - body - black PLA (any brand) - letters - transparent PETG (any brand - whiter better) - Bluetooth LED strip - magnets dia. 5, length 5 - glossy silver/chrome tape (back of the lid - distributes light better) - super glue -…
I designed this bracket to organize our bike shed as my sons’ scooters are always in the way and it makes it difficult to get the bikes in and out of our Keter Bike Shed. My original design has a cut out feature in the back to mirror the…
Read the Instructions file for more infos.
Hey folks! In my quest to find the perfect way to mount popular drawer organizer for screws, I stumbled upon an idea that turned out to be a game-changer – and I'm thrilled to share it with you all. Introducing my custom-designed…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
This is my first project that implies mechanical parts, but in the end all worked well. The Ballistic Knife is a Special secondary weapon that appears in Call of Duty: Black Ops, Call of Duty: Black Ops II, Call of Duty: Black Ops:…
