Counting matching models…
Vecna (Stranger Things) - Relief Sculpture Infill: 5% gyroid Supports: NO Layer: 0.12 Feel free to download it too Demogorgon (Stranger Things) - Relief Sculpture…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Vecna bust Sculpted in blender using remesh method High poly model not optimized This is my first model for 3d print My print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2 Infill: 25% Tree supports: Yes only touching buildplate…
Get your Kate Bush cassette ready, because here comes Vecna! With Vecna: Eve of Ruin coming out in only a matter of weeks, (or next Tuesday if you had the foresight to preorder) I thought I would employ a little foresight of my own and…
Inspired from famous tv series. Fan art. Non-comercial use! Just finished by AI
A new 3D figurine generated by AI, a Chibi Vecna (Stranger Things). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of…
A detailed 3D model inspired by Vecna’s house from the Stranger Things series.
Esta impresionante miniatura representa un monstruo original de horror orgánico: un ser humanoide alto y musculoso cuya piel ha sido reemplazada por gruesas enredaderas y tendones retorcidos que se enroscan alrededor de su cuerpo. La…
Vecna inspirred Action figure
My clone of Specna Arms M4 Charging Handle Extension - cause these suckers just love to break! This one is pretty much the same as the original. Printed in ABS and tested, so far so good. I printed it as oriented, which gives you a rough…
Vecna's clock from Stranger Things 4 This model is separated into sections for easy multicolor printing by layers The points on top are small and will need a brim
3D printable bust of Vecna inspired by Stranger Things Season 5. This is fan art and not affiliated with Netflix or the show creators.
No Support No Raft Infill : 10 to 20% at least 3 wall layers Good bed adhesion is required
Koncept designu Tento model představuje „Vecnu“, která se vyznačuje propracovanými a tajemnými detaily. Design doporučuje děsivý a éterický vzhled, ideální pro sběratele nebo nadšence do fantastických bytostí. Používání Je navržen jako…
Stranger Things Vecna from Season 5 To make him stand better,heat his legs with a heatgun and push him into a good position
A life size prop of the Rod of Seven Parts from the Vecna: Eve of Ruin Dungeons and Dragons adventure. As you play through the adventure you can give your players a physical prop of the rod pieces as they find them in the game. It has…
Commercial use is NOT allowed for this model
Vecna - Can Holder / Beer mug Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Automatic (30°) tree…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com Rate, like & comment — it helps keep the series growing! Recommended Print Settings: Layer height: 0.16–0.2 mm Line width: 0.35–0.45 mm Detect thin walls:…
CASE del tecno spark 10 pro I uploaded the wrong file earlier xd sorry
This Vecna bust is designed for easy and reliable FDM printing , while keeping a dark, organic, and highly detailed sculpt. Despite the complex textures, supports are minimal and extremely easy to remove , ensuring a smooth printing…
Dark fantasy bust inspired by Vecna from Stranger Things. Features strong organic details and a solid sculpt, ideal for shelf or desk display. Designed
Vecna - Seigneur Liche Fais sur Nomad Sculpt TableTop édition FanArt Pre-Supporté 32mm Cadeau de donation sur Ko-Fi Autres liens : Pinterest : https://pin.it/3WuBRdGWm Cults : https://cults3d.com/@RaphGrj Printable :…
Scatolino per messa in articolatore di modelli in gesso Utilizzare solo il TPU per la stampa. Se volete utilizzarlo è buona cosa passarci sopra la vasellina per una rimozione sicura del gesso. Baseformer for placing in articulator plaster…
Hormann ECN horns for use with standardised compression drivers
Lithophane of Max under Vecna's grasp
A fairly exact copy of the hop-up arm used in the original Specna Arms Edge SA-E17, but most likely the same one is used in any Specna replica with a rotary hopup chamber. There are two versions: the copy of the original part, and a…
its a handguard for an M4 style airsoft gun. Based around the specna arms design. it takes 9 hours on a 15% infill on an elegoo printer.
Assembly Instructions Start by printing the three main hull sections: Centro , Prua , and Poppa . Once printed, glue these three parts together to form the complete hull. After assembling the hull, print all the remaining parts included…
Cases for Tecno Pova 7 Ultra 5G This is my first case, send me a photo if you print it) 2 perimeters 3 ayers on top and bottom Must be printed as a single layer without infill Layer height: 0.3-0.2 mm Width: 0.5 mm with a 0.4 mm nozzle…
Replacement sole for Tecnica ski boots (for children). The shape is not 100% identical and I did some small additional adjustments after taking the photos, but it should do the job. OnShape project here . Print instructions Category:…
This model is compatible with the lego system.
We’re happy to share this simple free version of our design with the community - but the true Serev3D experience goes far beyond this single design! If you’re curious about all our exclusive and premium models, you’ll find so much more…
Vecna bust. Print with organic supports.
techno camon 20 pro 4g/5G smartphone case
Alright, story time. Couple years ago i bought myself a Specna Arms Flex SA-F01 for airsoft. I was a total beginner and i wanted my own so i wouldnt have to keep using my local airsoft club's rentals. At the time, i didnt know how much…
This Vecna bust is designed for easy and reliable FDM printing , while keeping a dark, organic, and highly detailed sculpt. Despite the complex textures, supports are minimal and extremely easy to remove , ensuring a smooth printing…
!!!SCALE THE MODEL!!! Please be very careful when removing the printed parts from the build plate and during assembly, as some parts are delicate and can be damaged if excessive force is applied. For the best print quality, I recommend…
Scatolino per Odontotecnico Baseformer for Dental Technician
May fit other manufacturer's flash hiders but, I have not tested it yet. The thread is clockwise whereas flashhider screws counterclockwise, but the nut fixes itself on the part, so You have to counter with another hand. Uses M3 screws…
Unleash the terror of the Upside Down with this spine-chilling 3D printable STL model that brings nightmare fuel directly to your desk! This intricately detailed figurine captures every grotesque tendril and twisted feature in stunning…
This is my vecna model working on making a better model if to small please scale him for best detail use 0.4 nozzle if any problems feel free to let me know.
I have designed this basic flexible bracelet to print with tecnikoa filafly filament and lure flies. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill: 15…
Model was resized to fit a 56mm candle on top and hollowed inside to fit a 38mm tealightModel was resized to fit a 56mm candle on top and hollowed inside to fit a 38mm tealight. Printed on Anycubic Kobra Max 2 , PLA , 3 walls , bottom/top…
Tablero espinal para llavero para técnicos en emergencias sanitarias. Si te ha gustado, por favor dale un me gusta…
A colleague approached me with the question of whether I could design and print a new sole for his ski boot. After a quick search, I came across this model and was very glad that I didn’t have to create it from scratch. Since it was to be…
Model Siren. Requested by @jnprinting. Singular horn only. You can do the mount just using glue
This is pretty crummily designed but it does work. It's a very snug fit. The bottom plate is intentionally thin to allow it to flex to grip the controller tighter. You will need: Monitor - https://www.amazon.com/gp/product/B0C7KPPXTZ M3…
The clock is chiming... are you ready to step out of the Upside Down? 🕰🩸 Bring pure nightmare fuel to your house this Halloween with this full-face Vecna Mask. Designed with deep, gnarled organic tendrils and a sinister skeletal grin,…
I designed this Optical End Stop Switch mount & carriage flag to fit my 2020 delta printer. I also made a cover to fit over the switch to help prevent stray light affecting the sensor. The printer started as a FolgerTech Kossel, which I…
Llavero inspirado en Henry Creel/Vecna de la serie Stranger Things Dimensiones:
A replacement grip for the Pilot Stick in Tecnam P2008 airplanes. The original grip is made of foam and is neither very convenient nor robust. This model provides a much better, ergonomic and long lasting alternative. Print both halves…
I decided to make my own gear for my RC car when one of the teeth on the original one snapped off. I found that using this gear makes the car louder, which probably means that there's too much slop between the gear teeth. I will probably…
A bust of Vecna from Stranger Things. It took a while, but I managed to clean up the printer and close the portal, and it was well worth it, because the result is excellent! It will take a long time, mainly because I used a very small…
Unleash the terror of the Upside Down with this incredibly detailed 3D printable Vecna figurine STL model that captures every horrifying detail of this iconic villain. This masterfully crafted statue showcases Vecna's twisted form with…
MGN12 carriages for SeeMeCNC's barbells. For each carriage you will need 4 McMaster M3 Heatserts https://www.mcmaster.com/94180a331 4 M3x16 Screws (Mount to MGN12H car) 2 M3x20 Screws (Barbell) 2 M3x12 Screws (Belt Retainers) 1 M3x12…
Unleash the nightmare with this spine-chilling horror figure STL model that brings cinematic terror to life through 3D printing! This incredibly detailed statue captures every grotesque feature with twisted, rope-like textures and an…
Vertikální grip na zabraň M16 od značky SPECNA ARMS konkrétně modelu SA-A90. Grip je dělán pouze na předpažbí tohoto modelu, tudíž nezaručím že bude pasovat na jiné zbraně a jiná M-lock předpažbí. Grip je velice solidní drží krásně na…
Update 11/2/23: SeeMeCNC Eris Kits are now shipping! Update 9/15/23: Github SeeMeCNC Eris Fork Repository The SeeMeCNC Eris , released in 2016, was a ready to print out of the box mini delta printer made with injection molded parts and…
Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament: PETG It is printed in multi-color with manual filament change at layer height.
Chiave regolabile 3D – Modello da esposizione / scena / gadget tecnico 📄 Descrizione Modello 3D di chiave regolabile (tipo inglese) , progettata per essere stampata in un unico pezzo. Esteticamente riproduce fedelmente la forma tipica di…
New model for free VECNA STL and 3MF Version Follow me for more Z-Minis Figures. Pre-colored 3MF, some details need to be hand-painted It’s not easy to create the 3MF version of this figure because it’s a model better suited for hand…
Obecný trojúhelník pro stavebnici k pokrývání roviny. Aby bylo možné model mnohoúhelníku vytvořit, má tloušťku 2 mm, i když se jedná o rovinné útvary. Obecný trojúhelník je výhodné tisknout dvoubarevně (rub vždy jednou barvou, líc dvěma…
The jolly printing torture test with a twist… He's a benchy with a very spiffy mustache, now benchy can see, and walk… don't worry he PROBABLY won't eat your 3D printer. Happy printing, and stay safe! (and stay safe from him)
Print it off with 99 walls at .12mm and you should be fine. I have a bit of flex but it does not really effect it. I made this so I could put a gate aster in the g36, it should work for any optical sensor.
This is a magnetic mounted z-probe using a mechanical end-stop switch. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector arms and their molded platform…
Filament Guide for your Ender 3 that has been updated to use SeeMeCNC EZR Struder . This guide was designed to work with your Mosaic Palette2 . It can also be used just fine without a Palette. You can print without support. Print Settings…
A replacement key tool for the Tecnica Cochise ski boot walk mode latch release.
This is a model of the SeeMeCNC Orion delta 3D printer Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
Model Vecny ve stylu fotografie, který lze osvětlit, červené světlo dodá této nestvůře temnotu. Tisk je bez podpěr, ale
I have made/remixed a model of a buttplate for the Specna Arms FLEX/CORE crane buttstock. It might fit other Specna Arms models. I lost mine during a game, so I had to build a replacement. The buttplate, clip, and buttpad fit the SA…
représentation du personnage de tecnoblade
Soluzione economica ma efficace per creare un Drybox che può contenere fino a 5 bobine di filo in una sola soluzione . Di cosa hai bisogno: Box Tecnomat per uso alimentare + Coperchio con chiusura a blocco…
Stand for Tecno Pocket Go Made it from a 3D scan so it should fit perfectly, may have to print at 101% scale if it doesn't
Krytka je delana na 8micku roxor (ale v pripade jinych prumeru bych ji ve sliceru zvetsil/zmensil. Tez pokud mate roxory nejak osklive zariznute/ucvaknute trochu bych ji zvetsil - 3-4%). Krytka je docela mala (mozna jeste predelam a…
After looking through the internet I found a lot of extensions for a Specna SA-X01 stock to fit larger batteries, but I just wanted a tube that looks stock. The metal extension is available in shops, but I had a roll of black PETG. Print…
I thought it would be good to have a few "base" parts for further development of holders for the Bricoman/Tecnomat pegboard, so I remixed a part, and created these configurations: single peg, horizontal base 2 pegs, horizontal base 3…
Tension release arm for the SeeMeCNC EZRStruder. Made this model because my stepper overheated and warped the original. Must be made from ABS or other higher temp material. Original part is injection molded ABS. Print Settings Printer:…
If you want to be sure of the solidity, consider printing with reinforced parameters such as the perimeters (I put 4) and the part is printed in PETG. You will need two zip tie (up to 5mm wide) to attach it to the motorcycle and the…
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Unleash the terrifying power of the Upside Down with this incredibly detailed 3D printable STL model that captures every horrifying wrinkle and tentacle of this iconic villain. This masterfully crafted bust showcases the grotesque beauty…
Somehow, one of the metal clips on my Specna Arms M249 Edge just broke off, so i designed this thing. i designed it as close to 1:1 as i could so that i could make it out of metal, and that means that if you wanna 3d print it, you'll have…
Show everyone you’re a true Stranger Things fan with this fun and eye-catching car sign! This “Vecna On Board!” sign is designed to be mounted inside your car window using two 30mm suction cups. It’s guaranteed to make people smile and…
Simpel wall art, fix with blue tack
Basándome en el esquemático de faketec de @ gargomoma hice está variante para fabricar en tu CNC casera. Está PCB se hace con una sola capa. Tiene el botón de funciones y el de reset. El resto no me cabía. Los archivos constan de:…
Cosa comprende il progetto Il Manico / Cilindro Principale (in TPU): Progettato al millimetro con anima passante per permettere ad una barra filettata M8 il preciso innesto tramite pressione NON A CALDO, della stessa fino alla fine del…
https://www.amazon.com/gp/product/B0GR4JKC4X/ref=ox_sc_act_image_2?smid=A1NR50YASSZD11&th=1 use these speakers 1/2 inch pipe and 1/2 inch pipe clamp. also you can print as many as you want and stack em up.
I Remixed this so i can use my Filament sensor on my CR10S with the SEEMECNC EZR STRUDER Category: 3D Printing
Just replacement insert that I lost
Same Great Model, but with less geometry. I have removed the filament runout sensor hole in the rear panel to just have a smooth inlet for my ERCF to feed through. I have included both with and without channels as well as the split options
The stock Eris doesn't have very good part cooling, causing wobbly sidewalls, messy overhangs, and oozing. There's a single 30mm blower fan due to the tiny effector, so this upgrade pack improves hotend and print cooling for the SeeMeCNC…
