Counting matching models…
Radiator Valve key for easy bleeding. Radiators need bleeding when they have air trapped inside them.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Always got dirty hands when you just want to do some weeding in your garden? Not anymore! Ok, for most people this job isn't always a fun thing to do, but with this tool it is easier than ever + it won't get your hands dirty if you want…
Print approx. €7.14–€8.73 excl. taxPreliminary estimate for PETGSource material: PET
Looking everywhere for this but to no avail. So I made this. This is a clone version of the Shimano Bleeding Kit. Print instructions 0.15 layer height. Standard Prusa ABS setting.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Filament Feeding Dry Box Port Description This allows you keep your filament dry while its being used by keeping it in an airtight dry-box and feeding it directly to your printer via a guide tube. Note: From my own experience and testing…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
A drying rack for storage bottles of breast feeding pumps and/or baby bottles. STLs are included for the Medela storage bottles, used amongst others on the Medela Symphony and the Medela Swing, and for the Philips Avent Natural line of…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The model utilizes old 'spectrum filament' spools with a total height of approximately 65mm, a radius of approximately 100mm, and an inner hole radius of approximately 26mm. Using the model for other spools may require remixing. I use 608…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Floating Cave for Betta Fish and Shrimp Feeder
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Diese Modell habe ich gemacht, da das Haus aus Holz nicht lange überlebt hat. Die Eichhörnchen hatten sehr schnell raus, dass sie nur den Deckel anheben müssen um an das Futter zu kommen. Die einzelnen Teile sind mit PETG gedruckt. Die…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a gradueted ruler (centimeters) that helps to space out the seeds in the vegetable garden when seeding. It has icons of some vegetables next to the value that indicates the gap to maintain between two seeds. So the plant can grow…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
Coin with engraved bleeding heart symbol. Uses art from PublicDomainVectors.org .
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Small insert for board game “Wingspan”. Box for feeding tokens and cover is scoring card with tasks for each round of the game. Also suitable for 1st (Europe) and 2nd (Oceania) game expansions. Malé vylepšení pro deskovku “Na křídlech”.…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Are you in search of an advanced project, with large printed parts, gears and electronics? So, why not print your own pet/cat feeding device? I created detailed instructions on how to print and build the shown device - just leave you the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Fresh water without insect escape. Cut “U” Shape (9x10mm) on sales box, insert dish and add water. The holes at the bottom are very small (2x1mm), so there is no risk of insects escaping (except for the smallest sizes). Print settings:…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Třecí deska pro terčovce a skaláry, stačí doplnit o přísavky. Vhodné tisknout na strukturované podložce Breeding plate for discus and angelfish; simply add suction cups. Best printed on a textured build plate
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
https://buymeacoffee.com/stealthyscw Kangaroo OMNI Enteral Feeding Pump RTL badge holder Utilizes the pole clamp threaded knob and 3M VHB double side tape to mount Printed in PETG-CF .2 layer height
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE from 15.02.2024: Recently there have been increasing reports that the new AMS, which will be delivered to customers after October 2023, have larger feeder-funnels. And there has also been a particularly large number of reports…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…
Simple and easy to print! Tool to help with weeding circuit designs.
This is a simple floating ring for feeding your fish. It's great to keep the floating plants from blocking the light and food.
Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean those small sticky pieces of vinyl off of your weeding tool! With this ring type tool, you can…
What this project accomplishes Easy/Fast filament loading/unloading from a single position above your printer. The least amount of hardware needed. The least amount of filament needed. (about 130g per box) The least amount of holes being…
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
Tiny little food bowl for tiny little pets. I scaled this to hold a very small amount of Morning Wood & Calcium Powders for my breeding colonies of isopods. You may want to scale it larger for dubia roaches or anything bigger!
*This is the updated version of my previous design in-order to make printing and remixing easier. Fixel 2 This is a print in place, expandable, fabric that doesn't require any supports. This design is made up of hexagons with small ball…
6/14/2023 - Added Version 2 This adds 0.5mm to the outside diameter and tightened the grip on the funnel. It is essential to print this version out of filament that will flex and snap into place, otherwise you run the risk of cracking the…
This is the most simple print design ever. It came about out of a necessity. I was having issues feeding my fish in my pond. The food would quickly get sucked up by my skimmer before the fish would be able to eat it. That could lead to…
Made to be held with 2" diameter suction cups.
Printed in TPU 95a Printed on Bambu Labs X1C Settings Layer Height 0.2mm Nozzle Size 0.4mm Material Type TPU / PLA / PETG Infil Density 15 Infil Pattern Gyroid Wall Count 3
Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
This is a single shot magazine for the FX Dreamline that allows you to load the pellets from the left side. It works really good if you are right handed and have a pistol grip on your Dreamline. Keep your hand on the grip, cock with left,…
Remixed @TeachingTech 's Self Feeding Open Source Filament Pelletizer , adding a soda bottle thread, removing the need for the additional TPU Seal, widening insert holes, and adding additional material around inserts. The amazon router…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Small box to wipe off the offcuts from the weeding tool. The…
Update version 3, 23.04.2023 Redesigned to fit with AMS lid closed. IMO it's less convenient design than v2 but it's possible to fit in entirely inside AMS. Might be troublesome for spools with larger quantities of filament. I think I'll…
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…
Filament guide for the MK4 frame, designed for side feeding. Includes a forgetful feature for inserting filament when already loaded. NOTE: Separate 3mf & STLs for left and right sides are provided; use the correct one. The forgetful…
Cow Feeding milk to Calf. It's an Indian cow Golden Color with two horns. It's very special animal for all humans in the world.
This was a quick project for my mother-in-law, to help remind her if the dogs have been fed or not. Yes, the lettering isn't centered. I didn't want to put in the effort and just roughly eyeballed it. Tolerance on the slider is 0.5 so…
Easy to print with no supports just use brim. Recommend to use PETG for temperature resistance.
Design Name: PatiPati Feeding Bowl Model Type: Dual food & water bowl with cat figure and paw print details Recommended Material: PLA / PETG 📐 Approximate Dimensions: Width: 140 mm Depth: 90 mm Height: 65 mm Bowl Diameter: 2x ~70 mm…
Simple isopod feeder tray scale to what ever size you need.
UPDATE 29/7/25 Slight tweak to hop up housing for better feeding. The upper and lower are heavily modified PAAR15 v3 from Igniz (https://www.thingiverse.com/thing:3728030) Scratches my Imperial itch. This is a body kit for Airsoft M4/AR15…
This is a scan of a small decor item I have. I used photometry and processed this one to be in a printable format! If you print this supports will be needed, let me know if you make it! I hope y'all enjoy! (ZIP file contains obj and the…
These are simple fish caves for my pleco. Printed at 0.3mm PLA without support. Sinks well. Dark colour works the best.
An easy to install overlay for your light switch. The Dual light switch model I used as a template to make the overlay was 130mm wide but the light switch in my home is 117mm wide so I've included both sizes.
After using Fusion 360 I decided to try Freecad and this is my first attempt using this software. 60 x 60 mm pot 55mm tall the Pot uses the vase setting. The Pots have removable bases to make it easier to move the plant on, to big pots or…
If you already have the container from Uko printed, you just have to print the new Top version. Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean…
Use MTB bleed kits to bleed road levers. Print in whatever material and whatever precision give you a suitably well-formed threads, preferably in some material that is much softer than the material of the Shimano road levers. Install a…
A simple ring to help keep your plants out or in, and clear a space for fish to get food at the surface etc. Printed in PETG, 5% infill, gyroid, 3 walls on a X1C. I did a light pass with a heat gun to ensure the PETG was nice and smooth.
I was tired of missing the food dish every time I dropped sinking food into my tank, so I designed this feeding tube to avoid buying one. Main tube is 250mm long, and the extension is 120mm. Print as provided in vase mode. The clips…
Could not get my girlfriend into 3D printing but plotting with a Cricut worked out. Now I can design and print tools for her and I get labels, printed clothing etc in return. This is a little bin to put on your fingers. No need to reach…
Since i dont want to always open the big lid of my Juwel Aquarium, i made this sliding feeding flap that fits into the 155x55mm cutout. Also added a locking contour into the flap, so it cant accidentally be opened. I've printed this with…
This is a fully print in place model. As a result of many failed revisions, this worked out to be the best solution. Because of the poor orientation, the model has been strengthened in strategic locations. Unfortunately, All supports are…
Diese kleine Schaufel wurde speziell dafür entworfen, um das Vogelhaus mit Vogelfutter zu befüllen. Die Schaufel kann natürlich auch für jeden anderen Zweck benutzt werden ;-) Gedruckt mit PLA ohne besondere Einstellungen. ……………….. This…
Description A small fish feeding ring which I primarily designed for feeding my rice fish fry, but can be used for many types of fish that eat from the water surface. It keeps the food in place and stops other surface objects such as…
A 50x50x60 seeding/propagation pot with drain holes. The bottom is designed to be insertable/removable so you could push out the shoot without breaking the soil around the roots. Print Settings Printer Brand: Creality Printer: Ender-3 v2…
Magnetic reptile feeding ledge for thick glass. uses 6 round 1.26 inch x 1/8 magnets 2 for inside part 1 and 4 doubled up for strength on outside part 2. Made for use with .5 ounce deli cups…
Aquarium feeding ring shaped like a fish. feeding ring is used to provide a place to feed fish and let light in when floating plants are used in an aquarium. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No…
This is a remix of wbphelps model which uses built in X1/X1C spool mount. I had a few spool holders using HugoHuge Filler spool holder. So I remixed it to allow the spool mount to work with this. For me this works really good, the feeding…
I designed this cap/insert for the lids of those 4l cereal containers I'm using to store my filament. I didn't find any model which suits that special triangle-like shape of the opening, other common lids seem to have more round-shaped…
Ant farm - ant breeding - ant nest Ant farm - ant breeding - ant nest Category: Buildings & Structures
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
Compatible with Shimano Y8J712000 : BR-M9000 BR-M9020 BR-M987 BR-M985 BR-M8000 BR-M785 BR-M7000 BR-M675 BR-M666 BR-RS785 BR-R785 BR-S700 Compatible with Shimano Y8J712100: BR-M6100 BR-M6000 BR-M615 BR-S7000 Name Compatible Y8FZ05000…
I wanted a box to help capture the small vinyl pieces while weeding Cricut projects. I found several out there but decided to build my own with an easy-to-use threaded lid. I've included the Fusion 360 file if anyone wants to modify it.…
This feeding bowl is designed to be an interactive feeding experience for your reptiles. The overhang serves to allows insects to "hide" then re-appear, ready for your gecko to eat! The overhang is designed with a dual-purpose, and the…
three sizes of ant feeding dishes :3 useful for not getting outworld dirty print at 0.12 layer height or lower to prevent nasty gunk from getting into all the layer lines
D-D JumpGuard feeding flap feeding basket for feeding frozen food over time Printed with my Bambu P1P, without support and come out great
Simple yet effective dish for feeding isopods
Futterring für einen Fischteich. Der äußere Ring ist ohne Luftkammern. Das Zentrum ist hohl. Ich empfehle mit Stützstruktur, 10% Dichte, zu drucken. Diese kann später entfernt oder sie bleibt vorhanden. Die Arme habe ich mit 10% Füllung…
A feeding station for your doll's best friend!
Dart Zone Max Solo Auto Feeding Inline Clip Inline clip for 3x short darts for the Dart Zone Max Solo. Flicking the blaster before shooting is NOT necessary because I kept the inner diameter of the dart storage area very tight and…
Breeding Cone For Discus. Please Post Completed Prints Cheers Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.4 Infill: 50 Filament: Overture PETG Orange Category: Animals
A magnetic pet feeding reminder. Requires five 6mm diameter x 3mm magnets to be glued in after printing. Printed in Atomic blue and white PLA. If you like my designs and want to send me a tip, you can do so via PayPal ….. Thank you and…
Spacer for bleeding hydraulic brake hoses. Compatible with Shimano XTR XT SLX RS405 RS505 M8172 M7120
This small spoon is designed for dispensing powdered fish food. Its compact size ensures precise and easy portioning, making feeding your fish a breeze. The "ergonomic" handle provides a comfortable grip, allowing for effortless scooping…
Hello there, Bear here. I designed this hook to be able to organize Ethernet cables in a standard Tripp Lite server Rack. The hook fits in the squared holes in the rack so that you can place them as you need them. Works great to organize…
Description This floating ring helps you manage floating plants and feeding in your aquarium. You can use it in two ways: Plant separator : Place floating plants inside or outside the ring to stop them from spreading across the whole…
Recreation of a feeding pump to be used for medical play and education. This is not a real medical device.
This holder is designed to keep a Flocare Infinity feeding pump and a 500 ml container securely in place—whether you’re on the go or setting up for night feedings. Its compact form allows it to fit inside a small children’s backpack, so…
A fiends daughter uses a Nutricia Flocare Infinity Enteral Feeding System, however when this is carried in a backpack it is possible for the pipe to become kinked, preventing the system from working. This print was designed to hold the…
Remix of great motor cover - i made it thinner and without a cable compartment.
A rather flat food dish for dog or cat food. I've created this for our dog, she's very sensitive to noise and dislikes common food bowls since they produce some rattling noise on hard surfaces. These dishes are soft (TPU90A), easy to…
Simple 10cm feeding ring to be attached to a sucker, then attached to the tank side. Category: Other
I use a feeding tube and the Enfit connector gets stuck very often. Even my husband can not always get it to seperate. This causes stress and is a hassle. Even when the Enfit connector isn't very tight or stuck it causes stress on my…
Ring to stop plants covering the entire waters surface allowing you to feed your hungry fish unimpeded. you can use an elastic band around the top if the depth is too low for your tank.
This 3D printable Radiator Bleeding Tool is a compact and reliable key designed to release trapped air from radiators, ensuring optimal heating efficiency and comfort in your home. The model is engineered with durability in mind – perfect…
The simplest of designs. A small measuring cup for pet food with a little paw. I've attached the solidworks files for anyone who whishes to place a custom logo on the cup. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20…
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr). I used some hot glue to attach the tube to the trough. Using two strings around the tube I hanged it to the ceiling of the chicken coop. I printed this design with 35%…
The cup model includes a false bottom where weight can be added mid-print to help with stabilization when removing scrap vinyl using the weeding tool. Print Instructions: Pause the print just before the first top layer of the inner…
Hi fellows, i didn't had a wrench with 7mm. So i designed one to use it during bleeding the hydraulic brakes (shimano). To open and close it with power i used pliers. During bleeding it is sufficient to use that wrench printed in PLA.
Pelletizer based on TeachingTechs design ( https://www.printables.com/de/model/672486-self-feeding-open-source-filament-pelletizer ) for router bits with 8 mm shafts and corresponding bearings (8x19x6 mm). The original BOM stays the same,…
may have to scale it to get it to fit right, should not need glue but you can use some. press into the hole in the front of the pusher and your misfeeding problems should go away.
I suggest a brim for the bleeding key and higher perimeter. See Cup.3mf for the modifications for a water proof (hopefully) cup.
Full reduced friction feeding system For extruder number one on the Prusa XL from the left side mounted spool holder using an additional filament guide mounted using the same method as the OEM filament guides. The natural spring tension…
![Sliding Feeding Flap [Addon for Juwel Aquarium Lid]](https://media.printables.com/media/prints/518195/images/4194163_365af7b8-9a8a-4ed4-b274-8b770f064af5/img_20230702_151303.jpg)
