87 models
EN version : The original Scan was made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . :) I fixed the model to make it printable. The skull is…
Print approx. €7.43–€9.08 excl. taxPreliminary estimate for one variant
Silueta medvědí rodiny. Jména je možné doplnit jednoduše v PrusaSlicer. Velikost medvědů si upravte podle vlastních představ. Silhouette of the bear family. The names can be added simply in the Prusaslicer. Adjust the size of the bears to…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
I bought a Bosch AdvancedVac 20 vacuum cleaner. Unfortunately, there are not enough brushes for cleaning in the kit. I decided to adapt the brushes from LG. The result is this adapter. Printed with PLA plastic, 30% infill
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Jednoduché drbátko, které je velmi rychle vytisknuto. Má ostré drápky. Podrbe, ale i relaxačně namasíruje… Nízké náklady na tisk, dobře skladné. Vhodné i na relaxaci v oblasti hlavy. Lze nastavit dvoubarevný tisk - plocha a drápky.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
this was quest for my friend, to replace lost cap to his outdoor waist water bottle, there was not any brand, hope someone find it usefull, it had unusual (to me) pipe thread, almost one inch diameter, “O” ring fits to the bottom of the…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
If you want to mount your LED strip with screws instead of self-adhesive use this model! Then you can easily move and re-use your LED strip if you feel like it.
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Case to hide the wiring
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
untere (größere) Ersatzspannhülse für LED-Scheinwerfer-Stativ mit Trapezgewinde TR38x3, die originale Spannhülse war geplatzt Festigkeit ist mit PLA ausreichend, gedruckt auf einem Prusa XL
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Ultra-Slim LED Batten Mount — V-TAC / Ledvion / Hoftronic compatible Replacement mount for ultra-slim LED batten fixtures with semi-round diffuser. The included OEM clips are flimsy and tend to slip — this print holds the batten tight and…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
sv. Hedvika Slezská - tradiční patronka Slezska a Polska 8cm vysoká Saint Hedwig of Silesia, traditional patron saint of Silesia and Poland 8cm high
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Used ScottW's filament guide as a base. After slight modifications it now can hold a LED lamp ( LEDVANCE ). Requires two M3x5.7 threaded inserts + two M3x8 screws (Prusa spares fit perfectly).
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
Pro hru, kterou hrajeme ve výuce jsme s žáky vytvořili kostku, která žákům určí, jakou formou popíší slovo, které budou ostatní spolužáci hádat.
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Holders for my Toolwall (Dimensions of my pegboard see picture below in "How I Designed This") my Pegboard (Germany): Link . EDV Srewdriver Set (Germany): Link . Have fun to print it. Due to the demand for the pliers holder, a 6mm bar is…
Anatomicky přesný model ledviny s močovodem vhodný i pro výuku ve škole
Meine Akku-Werkzeuge haben Adapter für den BOSCH AdvancedVac 18V-8 bekommen. Da ich im Keller aber auch einen KÄRCHER WD 6P mit einem Zyklon stehen habe, wollte ich nicht alle Werkzeug-Anschlüsse neu drucken. Deshalb habe ich verschiedene…
A beautiful minimalist painting of a Teddy bear with a heart on the wall. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15% Filament: PLA Notes: Top/botton pattern -…
A beautiful minimalist painting of a Teddy bear with ballons on the wall. Small size 160 x 200 mm Large size 250 x 320 mm Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15…
Nice bookmark, start with white and insert a pause after 1,80mm, then switch to black The yellow in the photo has been done with Ams system
Tento model je vhodný jako dárek pro maminku třeba na Den Matek.
A new 3D figurine generated by AI, The Scream - Edvard Munch. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
This adapter could be used for a DN32 hose (32mm inner diameter) to for example in a OsVac setup Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 5 Category: Tools
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás 2 Medvedy Grizly do lesního diorama, nebo jen tak na hrani. Velmi povedené zvířátka. Je vhodná k nabarvení. Moje deti ji naprosto milujou :-). Pokud vás moje…
Masa a Medved Cookie cutter
Minimalist Bear figure Size 146 x 121 x 20 mm If you have any idea about the theme of decoration, contact me in messages. Check out my other creations and don't forget to follow me so you don't miss any news. You can support me by buying…
I had difficulty finding any models for the REDARC RedVision LCD display so I made this model. This has a hole in the back if you want to screw fix it to a wall or something OR ive allowed for magnet slots in it two slots in the top…
Kind of my logo? Like the shape, using theese as coasters.
I just got a DeWalt cyclone dust extractor for a heavy renovation project at home following the advice of somebody on Reddit. The Bosch DIY (green) vacuum cleaners are notorious for not having a simple attachment for accessories, but…
Der Adapter passt an eine Baseplate mit Absaugstutzen von tobbegraf ( Thingiverse ). Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
Já tisknul PETG na standardní nastavení, ale myslím, že materiál může být použitý jakýkoli. Tiskl jsem 0.4 tryskou a 0.4mm šířkou stopy - stěna je tlustá 0.8mm.
Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
Socha medvěda s designem Low Poly. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
If you hear Grieg, he can watch his disk turning. No supports needed.
Jednoduchý stojánek na tablet nebo mobil - ozdobený medvědí hlavou. A simple phone/tablet stand bear decorated.
Print with PLA or PETG. Recommended layer height 0.2.
🇨🇿 Český popis je uveden níže / Czech description below 🇬🇧 Model description This model was originally designed as a New Year’s greeting gift (PF) to amuse my friend – bear keeper and later many others 🙂 The cage is designed to be…
Holder for the Remote. It has a inner space of 15x38 mm which fits the remote with the size 14x37mm in a upright orientation. Two other sizes available. Dimensions are in the filename/printables file description. It is intended to be…
The Osram / Ledvance outdoor zigbee smart socket is designed to mount on a spike and be rammed into soil to keep it off the ground. There is no way to adapt this to be a wall mounted socket. This small wall holder solves this problem.…
Pro zakrytí nosné konstrukce lze okraje terasy obložit zakončovacími lištami. Pro uchycení lišt použijte nerezové vruty, např. o velikosti 4 x 60 mm. Lišty se chytají vrutem do středu terasového prkna cca 10 mm od vrchní hrany. Místo pro…
Mounting needle for Ledvance garden lamps.
made it with petg 2 walls 5% infill nozzle 0.4mm width 0.20mm you cab doit better with 3 0r 4 walls infill10% bescause is a little bit heavy so be careful when you open th e riser
Immerse yourself in the world of expressionism with this unique candleholder inspired by the great Edvard Munch. Each line of this piece embodies the characteristic emotional depth and dramatic style of the master, transformed into a…
This is a mounting bracket to install the LED string lights inverted and along the balcony railing. for the Ledvance SMART+ String Lights On the LED lamp holder, there is groves for 2.5 mm cable binders. You will need 24 pcs of 2.5 mm…
These are the models I use for my custom Kauri X, arms are cut in 6mm carbon.
Jednoduché víčko na velkou zavařovačku s packou pro lepší manipulaci a nožkama pro bezbordelní odkládání na stůl. Dekorace medvěd :) Víčko se nasouvá zboku. Nejedná se o upevňovací víčko. Jde tam na volno. Předchozí verze se nesetkaly s…
Print material PLA, Pet-G,…. Infill 20% Perimeter 4
Léra / pravítko na předvrtávání , vytvořeno pro stavbu fošnového stropu dosti usnadnilo práci nebylo potřeba vyměřování každé fošny, rozteč děr pro vrtání lze upravit
Dear all a small project I started instead of buying those gears, 230g or less with 6 perimeters prusament blue on my mini took 3hours.then gluing a rope over the ball to make smoother worked well!. It is now very gentle! Less than 10…
Mount it with a screw or tape
You have to move the LED panel sideways into the the original holder. This is not possible in a pitched roof. Therefore I created this holder and now you can click the panel from below into the holder. Used panels:…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A 3D relief model inspired by The Scream , the…
Endlich sitzt der Aufblasadapter, des Bosch Akku Nass- und Trockensaugers AdvancedVac 18V-8, sicher und fällt nicht ständig raus. Gedruckt mit PLA+, mit 15% Infill
A base putting between your wall and the lamp so you can install cables overground/ on the wall. The small slot on the bottom (on the opposite side of the slot for the cable), is to prevent water from filling up the base. I printed it in…
PETG 0.2 2 периметра 2 сверху/снизу заполнение 15% UPD: добавил версию для штатного диска 2.4мм
Using three LEDVANCE light bars of equal length like can be found in the lighting section of Bauhaus. Print three pieces, remove the factory end caps and snap on. This creates an illuminated equilateral triangle. I print these parts with…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A 3D model inspired by the central figure from The…
Print in anything other than PLA, since i don't expect it to hold up well in the hot summer months. Consider printing it in only perimeters, since it will not cost much extra filament.
Studenti si podle předloh / fotek zkusí sami vymodelovat a vytisknout model budovy školy.
I wanted to insert some of these String-lights from LedVance into the surrounding of my terrace. I drilled Holes with a forstner bit, printed out theese sleeves and inserted the lights into it. Lights: https://amzn.to/4mBGkAv (Amazon…
2 different covers to minimize the field of view of the motion sensor.
Carry a tiny piece of iconic art with you! 🎨 This keychain is inspired by Edvard Munch’s famous “The Scream” , recreated as a simple and bold 3D printable design. The recognizable silhouette and background details make it a fun accessory…
2 different covers to minimize the field of view of the motion sensor.
This is a mounting bracket to install the LED string lights inverted and along the balcony railing. for the Ledvance SMART+ String Lights On the LED lamp holder, there is two groves for 2.5 mm cable binders/strips. You will need 24 pcs of…
Hello, Today I have a Winter Bear in a hat for you. Very nice figure. It is suitable for children and for diorama. It can be colored easily. My children love to color figures :-) Happy printing! I used PLA/PETG as the material. You need…
Model je navržený tak, aby byl snadno tisknutelný a zároveň vizuálně atraktivní – ideální jak pro začátečníky, tak i pokročilé, kteří chtějí rychlý a hezký výsledek. Co z něj dělá skvělý model: roztomilý design, který zaujme na první…
Famous Art - The Scream - Edvard Munch - 1893 3D printable model.
Designed to be printed by color swap! The pictured print was done with NO MMU . Just color swaps :) photo & print courtesy of MakerPotato
Recommend using TPU filament (either Bambu or Overture) with 80% infill for best results. Hole sizes for the eyebolt and railing is 1/8in. Holes printed slightly larger to account for printing error for better fitment.
A beautiful minimalist painting of a Bear on the wall or with a stand on the table. Size 200 x 170 mm You can find the small print stand for the table on my profile ↓ https://www.printables.com/model/759271-small-wall-decoration-stand If…
