Counting matching models…
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
Here are Maleficent's horns! Modeled by Garrett and Chelsey of Chaos CoreTech and featured on 3D Printing Nerd! Print instructions Scale to what is appropriate for your head, or whomever's head this will be on, then, slice, print, enjoy!
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
I really like the little 1x1 case by @ftobler and printed a bunch of them. However, I couldn't resist making a few of my own tweaks to the design. Easier Overhangs - The original model has pretty shallow overhangs on the corners that can…
This is 3D printable model of the Constitution Refit NCC-1701-A Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. Pieces of the necelles need to be…
A refinement of Emmett Lalish's excellent Gear Bearing -- now with chamfered edges, a smoother outer surface, and dimples for your fingers to hold. Internal geometry and clearances/tolerances remain unchanged. Prints great in PLA, PETG,…
This is 3D printable model of the Defiant Class NX-74205 Defiant from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of some details need to be separated into separate models in the…
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
Prefer print thread area for layer height smaller 0.16 for the overhang of thread, 0.12 will be great. I use varies layer height in superslicer, I print other layer at 0.22 height. I use ABS so I can put the spool in the filament dryer.
These are some butane lighter refill adapters/nozzles. The nozzles that came with the can of butane never fit my lighters quite right, so I made my own. I had the best results when they were printed with a 0.25mm nozzle. Note that there…
I had a co worker ask me if I could make some reusable wedges for him on the 3d printer. Instead of looking for a model that was already availble I descided to design one that has features I would want in a door chock. I printed this in…
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Nature's cutest (and stealthiest) predators It was re designed and resized from usage for childs (dissambleable is dangerous for small childrens) One time print all. Use supports as a picture. (don't open full support it make u crazy for…
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
This is 3D printable model of the NX Refit NX-01 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing but some painting is still required. For the…
A clean rhythm for daily brews. This modular, refillable tea bag dispenser is designed to balance functional clarity with thoughtful form. Tea bags load from the top and dispense smoothly from the bottom, echoing the efficiency of a…
Hey there! Chances are, you're the proud new owner of the Pulsefire Saga or Pulsefire Saga Pro (or maybe even both!). We wanted to provide you with the STL and STP files for your mouse's out-of-box parts as well as some bonus shapes and…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
This simple spool is used to eliminate the need to throw away a filament spool each time you purchase filament. Filament refills are readily available and easily drop onto this refillable spool. Print spool parts A and B and put them…
This is a Maltese cross I designed for a retired firefighter. I printed in Prusament PETG signal white. Temps were 250c nozzle, 85 bed at .15mm layer height. Turned out really good! Hope you enjoy! Update: added the design for anyone who…
This is a high definition recreation of the original and beloved Designer Lithophane Moon Lamp by Frank Deschner ( @FrankDeschner ). M aybe a gift. This is easy to print. This is an eye catcher. This is a remix. Globe: 21 cm / 8.2 in…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
Just made some small cosmetic changes to this fidget ring that I liked. The spinning part had too much wiggle room for my liking, so I cut off about 0.5mm on the height. This gives it enough room to spin while still keeping it aligned.…
This is a set of craters for miniature wargaming. Vary the scale, even non-uniform along the Z-axis to get more variety. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a…
16mm Gardena Gasket optimized for FDM printing by giving some more inner spacing. Can be printed in TPU 95A. But softer Flex material is advised. 16,6mm diameter for water tight function when printed cleanly 11,9mm inner diameter for easy…
Lego Feuerwehrmann / Lego Firefighter
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
Hi, I made this adapter to use the refill filament from esun on the Bambu refill spools, made these with snug tolerances so when using the AMS the filament doesn't spin freely and cause an issue. Edit: Added a new version that allows you…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
Attaches onto the side rails of the ragefire, holds the original belt or various delinking belts available on the internet, attaches without hardware
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
A refill adapter to fit my lighters.
An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…
Spool for using with Rosa 3D filament refill. Print twice push it firmly to the both sides of filament refill.
If you dont know how to import your QIDI X-Max 3 to Cura, you can use the following instructions. If you already have a 3D Printer in Cura, just go to your configuration folder . Help → Show Configuration Folder Extract the files from the…
Reasons to make a remix: Added a low-profile base to decrease minimal height to 72 mm Needed a flat bottom for an uneven surface Angular design Configurations: Low profile base + short screw: 72mm - 108mm Normal base + short screw: 80mm -…
The definition of IT-Support. Props to the Orignial, it was so good i needed to make a remix of it. Can be printed with no AMS, with just one filament change. Edit: Now with corrected spelling of Wizard.
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
About This is a lightweight universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
I liked Peter Mastren's idea of relocating the filament sensor as a pass through. Used his layout with the remixed K1 Max Riser I made and came up with this. I also added the cutout to make it easier to remove/reset the lock washer.…
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
Provides several different gridfinity bins/widgets that can be used to create desk-valets or pocket-valets. While these should work well with almost any gridfinity baseplate they are designed to work best with the “ Gridfinity Refined ”…
Print the funnel upside down (like a pyramid) with no supports. You will need to rotate the disk back and fourth as you fill. You can brace the funnel against the PowerDisk by pushing on the part of the print that extends next to the tip…
A new 3D figurine generated by AI, Idefix, from Asterix & Obelix. Asterix & Obelix figurines are here Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld…
Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…
A fully printable refillable disc notebook! Compatible with half letter, junior, or A5 refill paper (common size refills for 8 disc planners like TUL, Circa, Arc, or other Discbound systems). I used a Happy Planner hole punch to create my…
Enjoy using these high definition files from a 3D scan I created with my Raptor 3D scanner!! Meshed with 0.06mm precision, so files will be quite large -- Simplification is recommended if you are not doing an extra large print! I will…
lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.
Descrizione Un revolver futuristico dal design aggressivo e ricco di dettagli, pensato come modello 3D da esposizione, cosplay o collezione. Il look unisce linee meccaniche, superfici scolpite e uno stile sci‑fi/gotico che valorizza molto…
Korry style switch for the 7 buttons on A320 EFIS panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. Button Top Indicator and Bottom Legend are CNC machined from…
I used the recently released parametric CAD files from Core Devices (thanks, Eric!) to design a sleeker Bumper Case from scratch. I printed this with a 0.1mm layer height on my Prusa Core One and Prusa Mini. I've successfully tested it…
K1 Max Riser remix with tighter tolerances and fillets. Matches my filament sensor relocator remix/mashup. This will work with the standard K1 Max Riser Bar.
Simple but effective master spool for eSUN PLA refilament spooless filament. I noticed that some of my other master spools did not fit the eSUN brand so I made this one. You will need: QTY:3 M5x60mm SHCS QTY:3 M5 Nuts Compatible with my…
MasterChief24's model was weak at the hips, waist, wrists, shoulders, and ears. I beefed them up. Category: Model Robots
Litter Locker replacement cartridge that's easier to refill and hold 3rd party bags. Onshape Design:…
Update Version 1.3 - 27.02.2026 A scale was added to the B side to better estimate the remaining amount of filament on the spool OpenPrintTag ready: The shape was slightly adjusted (B side) and markings were added for easy attaching an…
This is a washing tunnel for firefighting hose with Gardena connection This tunnel works great for C-Storz fire hoses and we tried it also with B-Storz hoses. I printed it with PETG 3 perimeters 5 top and bottom layers 100% infill…
Update: I've made a new version of each body, which supports 7mm googly eyes. I exported the model for the Cuddlefish from Subnautica, and modified it to use the modular ball-joint arms (from 3DCentralVA and Ellindsey ). Though the arms…
eng: Wedge under the door that firefighters and rescuers can use. The wedge is modeled directly for use by firemen in traffic accident fires and other activities. The product is used at your own risk (everyone with an ID card knows what…
My cat, Ghost, has taken to perching on the tower (GPU water cooling exhaust on top) and when she wants to play or is watching out of my room she had a tendency to stand RIGHT ON THE BUTTON! So, taking inspiration from RangerYogi's cover…
This is my entry for the FormFutura Refill Master Spool Design Contest. To challenge myself I wanted to design a spool that consists of two identical parts, no supports, no separate printed parts for connecting the two halfs and no…
Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…
Remix of op00's Zipper Pull . I needed a couple of new zipper pulls for a laptop bag that sees daily professional use in the field. It has a really fat zipper with quite a heavy pull. The original design by op00 was great, but far too…
Maybe you like the Original Clickfinity Refined but think it uses too much filament, or maybe you were just looking at different Gridfinity baseplates and found this. Either way, this might be what you are looking for. Clickfinity Refined…
GOOD LUCK PIRATE SHIP. Good luck printing it. If someone actually prints this successfully .. wow... please share how you did it. ITs hollow but thick enough to print. Has stairs going down to lower deck.
When I first got my suck it! dust boot I immediately set upon destroying it. It came free as part of a Onefinity sale so I didn't realize how expensive they were. After looking for a suitable replacement boot to buy I quickly noticed that…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
Updates June 6, 2021: Improved the slicing options to result in softer feet Added a much larger version of the feet for increased dampening Description I designed these feet as a 1:1 replacement for the original feet on the Tefi KC-1 Ra.…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
3 improvements towards the original OTF Fidget Knife model: Dual rail for handle & blade for better rigidity Beefier & stronger negative hook that is harder to break Rounded slider for easier to flick Oh, and i also removed the holes on…
THIS IS A MULTICOLOR AMS PRINT This is the shield for a firefighter helmet. I've included two options. One with curved name plates and another with just a straight name plate. The straight name plate is editable in Bambu Studio For the…
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
I printed this out ages ago on a fairly finnicky Anet A8 and wanted to go back and re-print the model I had found ages ago on my Prusa MK3S+. Going back to it, the model does have a few issues. I upscaled it by 150% (it's close to the…
Einfach bei der Sagrotan-Flasche oben ein Loch reinsägen, Deckel aufkleben und mit dem Verschlussdeckel verschliessen. So spart man viel Geld :-) Verschluss benötigt Support.
Bins, Bins, Bins all for the refined version of Gridfinity based on grizzie17 Gridfinity Refined Model. This list of bins will get you started on having a fully refined system. Take advantage of the thumbscrew, stacking plates, and more.…
Hereby I release my AIO ReFill - Masterspool aka (All In One ReFill - Masterspool). after having a lot of annoyances in the industry by companies releasing and re-releasing or resizing their refill spools I thought this is enough… so I…
An open-source frame-fit hook generator for openGrid . This model attaches directly to the frame of an openGrid board, so it does not need a separate snap or openConnect connector. The default settings generate a compact hook for holding…
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
A snap on Picatinny rail mount for Surefire Pressure Switch. Once put on it's very hard to take off, decide carefully before applying. Tape can be used to stop the pressure switch from sliding out. Print right side up, with support and…
