1,248 models
Great showpiece or gift for your friends. Treefrog is commonly used as a 3D printing benchmark. We prepared the file at variable layer height 50 - 120 microns layer height to show you what your printer is capable of 🙂🙂 Author: Morena…
Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full. This…
Very nice skull made out of a fine mesh. Can be printed in different scales and used as a coin holder or just an organzin help. Print instructions To achieve high detail, print with a 0.25 nozzle at 0.10 mmlayer height and lightly torch…
A fun little fish-shaped refrigerator magnet! The fridge magnet is actually quite strong because it uses (3) 6.4x6.4x2.5mm neodymium-iron-boron (rare-earth) block magnets, which are embedded in the body during printing (shown in the…
Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !
This TreeFrog Whistle works very well. It sounds great. I made it from wonderful and popular https://www.printables.com/model/3116-treefrog and https://www.printables.com/model/495173-flat-pocket-whistle and then merged them into one…
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
I entered last competition with Skeleton theme soap dish, so it would be fun to make it as a tradition ! For this competition I modelled in Blender Full body skeleton with 6x3mm magnet connection holes. Had to make small changes to…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
Wall Socket Refrigerator Magnet with universal hole pattern for 2 to 4 pieces of magnets ⌀4 - 10 mm x height of 2 or 3 mm are uploaded. Please let me know, if you need different holes for your magnets. Support material is only needed…
printed with 0.15 layer height Prusament PLA, Pinapple Yellow, Jet Black and Lipstick Red. Added an extra layer for the red cheeks and made three pockets for magnet size Ø 6x3 mm.
A drip pan designed for the in-door water/ice dispenser of some Whirlpool refrigerators. Certain models place the water dispenser so close to the front, it ends up dripping down the door. This tray catches those drips. A sleeve for a…
Remix of the very cool model "Wireframe Easter Egg" from Anders644PI (thingverse.com). I cutted it and made a edge to hold an egg. Feel free to decorate the egg and give away to friends as a easter gift. Print Settings Printer Brand:…
What if you and your young kid are alone at home, and you have to cook the dinner, but the kid likes to mess up the whole room while you are in the kitchen? In that case you bring your kid with you to the kitchen, but making a playground…
Build your own heartshaped pictureframe. This cool Kit prints in an hour and can be assembled without glue. Just snap the parts together following this quick guide: For easier orientation of the foot, the is a little extra-heart that must…
EN: The stackable fridge egg holder is designed for printing on very small 3D printers such as the Průša MINI+. It consists of two parts (top and bottom). The bottom part (17x9x2cm) is designed in two versions (for 8 smaller eggs or 6…
I had some real estate left on the Skadis pegboard and 3 spare wireframe skulls by philnelson https://www.thingiverse.com/thing:1388237 Of course i'm going to the mount skulls onto a pegboard! The adaptor is designed to fit the skull…
I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…
Fits any barrel <16.2mm OD. Friction fits, elephant's foot will require post processing where barrel mates with muzzle. Reflex sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical…
Uses 12mm x 2mm magnets. Four layers of manual color change.
I recommend printing with the first layer at 20% speed without supports; this is already set in the .mf3 and .gcode files. The magnets I used were 5mm diameter and 2mm height. You will most likely need to put a little super glue in each…
Samsung French door refrigerator doors have an issue where sometimes the mullion doesn't close properly due to the left door being misaligned too low. This shim is a $0.02 replacement for the $12 OEM part. Video describing problem and…
Heute Mal einen modellbauerischer Beitrag. Es ist ein selbst konstruierter Kühlschrank. Druckzeit: ~9h Material: Petg (Rahmen und Türen) & Pla (Innenausstattung) Maßstab: 1:14,5 Video zum Druck habe ich schon gestern als Reel geteilt…
Made a Pitt refrigerator magnet and have embedded 3 8x3mm magnets. There are filament change stops for the magnet insertion, which is first(4.55) and then the color change(6.80). Printed on a Prusa MK3S+. No supports
Wireframe print. Seems to consistently print round-ish balls with this gcode. Would appreciate feedback with other printers. Send a message to request modifications.
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Christmas challenge Challenge yourself and print this Christmas tree and share your results. Design This tree was carefuly designed to be fully printable without supports. Printing tips? no supports higher retractions lower speed lower…
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…
English text see below Ihr habt einen Kühlschrank der Marken Siemens, Bosch bzw. B/S/H und die Türfächer hängen schief oder lassen sich gar nicht mehr einhängen? Dann ist wahrscheinlich ein nur 1,3 mm dünner Steg im Türeinsatz gebrochen.…
Lösung für gebrochene Nasen an den Kunststoff Halteschienen Halterung für 4mm Kühlschrank Glasböden /Bauknecht/ und Andere
Designed this adapter to fit my bike Specialiced levo sl (FOX-34 Rythem shocks) on the Treegrok bike rack system you will have to experiment with the right fillament to use in this case the bike is undes some forces ;-) i selected PLA…
This model is not strong enough (I didn't consider the strength of in-layer adhesion). I redesigned and created new model from scratch: https://www.printables.com/model/583147-magnetic-towel-hanger Remixed from kitchen towel hanger and…
I will sometimes put meat in my microwave to defrost during the day since I can't leave it on the counter with my pets, so I made this magnet to not forget. Takes two 6mm diameter/3 mm height magnets. I did a simple color change on the…
Simple adhesive-mounted double hook designed for the top edge of a refrigerator, cabinet, shelf, or radiator. Ideal for hanging kitchen towels, oven mitts, dishcloths, and other lightweight accessories. The hook is attached using…
I printed additional struts for the bottle rack of my BOSCH KGN39EICF refrigerator. Now also small bottles and beverage cans can be stored conveniently. Update: Added a cross stud in the back. - See pictures.
English version below Konsole/Türeinsatz für einen Bauknecht-Kühlschrank vom Typ KGN 20C23IN Könnte ggf. auch für andere (Bauknecht-)Kühlschränke passen (ungetestet) Aus PETG gedruckt, weil es chemisch beständiger als PLA ist und bei bis…
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
Drag the files in as 1 object and color as you wish. You can even do this with a basic single extruder style printer and just pause at a certain height and change to black filament to do his hat and eyes etc. Alternatively, you can print…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
Just change the scale to print the size you need. Works better the bigger the cat. No supports required. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content.…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Refrigerator Can Holder holds 10x 330ml drinks cans (see Print Instructions , below, if your cans are a different size). You put the cans in the front at the top, they roll to the back, drop to the bottom then roll to the front so you can…
A remix of @BPmakesthings Howling Wolf Low Poly Model. Pictured: Right is original version printed at 100% scale, Left is slim version printed at 150% scale. Printed at .2mm layer height, 3 walls. There is not much infill in the model.…
Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…
This is a really simple print that needs no support. Thanks to input from Printables user faqiu who suggested making a shorter version, I have uploaded two alternative sizes to the original 240mm long model - 200 and 160 mm. I use the…
This model is made as a part to teach students how to get into fusion workflow. Also how to be the part of printables community. Reimagined og figet toy.
This is a replacement for the awful button style water dispenser in some Whirlpool refrigerators. There are two models attached, a “standard” and a “extra." The standard one may not depress the button due to flex in the model based on the…
This model was design for looks and not function. All the parts were printed separately and glued together. I used a stainless steel peel and stick for the body and doors. I did do a lot of sanding and smoothing on the printed parts to…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Use these 1250 names together with “ fridge poetry ” to create some refrigerator messages or poetry: Just print the names with a filament color change, slide in a 8x1mm magnet from the bottom (it sticks without glue) and have fun!…
This can organizer keeps the coldest/oldest drink at the front of the shelf where it is easy to grab. It is broken into six pieces to easily fit on the bed of your printer and can be easily glued together with CA glue. There are holes at…
AJ the Frog Low Poly If you like it --> press like it :-) Here you can find AJ the Frog Low Poly - a modified model of the AJ the frog with a gem! from Rozzo . If you download the Low Poly Version of AJ, it would be nice if you download…
Print it in PETG for more flexiblity - or TPU if you like.
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/star-wars-battlefront-ii/#Darth-Vader,-Kampf https://ko-fi.com/dwdzhde Vader in Kampfposition aus dem Spiel Star Wars: Battlefront 2. Skaliert auf…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Be sure you have good build plate adhesion as he might jump away…. No seriously, the front legs have a slightly too steep angle, which can be hard to print if you do not have proper cooling and build plate adhesion. Other than that it's…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…
sharing from creators original posting on https://www.thingiverse.com/thing:6210632
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Inspiration This is my submission for the April 2025 fridge-themed printables design contest . The contest was my main motive for making this. I used to keep a magnetic whiteboard on my fridge to track needed groceries. But I found I was…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
This an 80mm objective diameter, 330mm focal length refractor telescope. It is a work in progress, but it should be functional as-is with some fuss and fitting. each section is small enough to be printed on a Prusa Mini. It uses this…
The same great Fish Refrigerator Magnet , only smaller! Size decreased by 55%. Cuteness increased by 200%. Magnet consumption reduced by 66%! What's not to love?! Similarly to the original, a print pause is used to insert (1x)…
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge. I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them: 2x M3 - 5mm Threaded inserts 2x M3 - 6'ish mm Bolts…
Tired of the cheap letters you find in stores that are weak and fall off, or made of foam and therefore impossible to properly clean? These letters are designed to be durable and super magnetic, strong enough to hold up paper notes, and…
This adds space for 3.97mm x 3.175mm magnets for Rikkers' Tiger Shark Clip design. The 3mf file is configured to pause for magnet installation. Warning during printing: the magnet can potentially jump up and stick to magnetic material…
I saw something similar on the Web and thought I could do this my self. So here it is an Airplane Window Picture frame. The Picture size will be 10x15mm (4x6 inch).
Thesse models are ripped from the Cad viewer app named "CADDY" Tools used : apktool (to decompile the apk of CADDY) assetriper (for getting the models out of unity)
refrigerator egg holder for 10eggs compatibile: Grundig GQN 21225 GB size: 241x108x28 mm diameter of the hole: 40mm
This is my first custom designed fpv drone frame to be cut by cnc from carbon fibre sheets.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This water filter cap should replace various Whirlpool brand side-by-side refrigerator filter caps. Our cap was missing from the day we moved in, probably left on an old filter. It was always a pain to grab hold of the filter to remove it…
A remix of the Chest Set Wireframe by Jun0 Each base has a 1.5mm deep circular indent to fill to give the pieces weight. Note: Support from Build Platform Only is recommended, and should be removed cleanly if printed properly. Thanks Jun0…
This can be put on the table as a decoration. Without any practical purpose.
This is a blender edit of the owl designed by Cushwa. I've gotten the inspiration form Thomas Sanladerer. I haven't managed to print this successfully but I'm still trying. I'm curious to find out how you guys manage to print this! Edit:…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…
Mini refrigerator based on the Haier Model. Printed using PLA withe and silver. On the doors I used a metallic self-adhesive paper. For the interior shelves I used acrylic sheet to give a glass effect. Please feel free to comment to help…
Valentine Heart Design 13 collection Basic heart shape and variants with smoothed, LowPoly, Wireframe and Voronoi styled design If you like it --> press like it :-) Make your loved ones happy with this design heart! Take a look at my…
Wireframe Apollo Astronaut Support Free Remix Subscribe Now! Remix to support free and printed. Wireframe Version: Solid Version here https://www.thingiverse.com/thing:4615496 : Category: Sculptures
This is a wireframe head of a deer, inspired by various wireframe sculptures, mostly the one from Dotsan . The model is rather hard to print if you don't want to have 10 times more plastic in supports than in the model itself. To try to…
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
This device is design for the DM26xx and DM28xx Dometic refrigerator models. I have included the design file so you can modify it to work with your brand/model of refrigerator. Simply install the device to hold the door slightly open.…
Base for Philips 2200 Automatic Espresso Machine with LatteGo Should fit the others as well but I haven't tested. Printed on BambuLab P1S at .2mm Layer in Black Elegoo PLA This was 3D scanned and modeled by www.f3dscans.com
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
This is yet another Samsung door mullion repair piece. There are a couple designs out there, and this is my attempt. This is the flipper that closes the center door flap on several Samsung refrigerators. It fits quite well, I've installed…
The famous infinity cube fidget in wireframe! I wanted to recreate the infinity cube with as much empty space inside as possible, while still maintaining enough strength and print-ability. The cubes can be printed individually and in…
Unleash your inner superhero with this 3D printable Batman wireframe keychain. Inspired by the iconic bat symbol, this lightweight and stylish accessory is perfect for Batman fans, collectors, and cosplay enthusiasts alike. The intricate…
Hey there! I made this 43cm (16.93 inches) wall art that can be printed in one, two or even three pieces, so it's printable in its original size on smaller 3d printers aswell. However if you'd like to scale it up or down, go ahead! The…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
I really like this model and wanted to share it.
This model is for a refrigerator magnet intended to be printed in 2 colors. I've included 2 models; one for an 8mm diameter round magnet and the other for a 10mm diameter round magnet. You can scale the design (X & Y) in the slicer for…
![Skeleton [Refrigerator Magnet]](https://media.printables.com/media/prints/218804/images/1999824_ef024956-fe97-47fa-bc4d-b47d4fc6f789/0f347690-3a88-4947-84ce-f7cb67769895.jpeg)
![Wireframe Christmas Tree [no supports] - Bridging and No stringing challenge](https://media.printables.com/media/prints/655442/images/5166896_79daec47-c56b-4714-a9fe-e8b3f3ae71c2_a6a220e6-3731-44b5-a6be-cbd25e714454/snimek-obrazovky-2023-11-22-022708.png)
