Counting matching models…
Version en français : Découvrez ma collection de vis et écrous optimisés pour l'impression 3D, spécialement conçus pour vos projets du quotidien. De la taille M3 à M8, ces pièces respectent des normes rigoureuses d'optimisation pour…
I made this for my Brickheadz collection. The tolerances are very tight, they need to be, to keep the shelf sturdy enough once you start connecting more than a few of them together. They can be a little difficult to fit together if you…
Oregon, USA (OR) Topographic Relief Map with Rivers and Coastal Waters Oregon, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic project…
The Ducks were a team that was all about fun - Crazy color uniforms and the most fun mascot around so have fun printing Easy to print and easy to scale - g-code is set up for Manuel color change.
The Garmin Oregon 600 Navigation is otherwise a sturdy device but may become non-functional due to the degradation of rubber buttons over time. The recommendation from the manufacturer is to buy a new device, which is very environmentally…
3d miniature of Portland, Oregon! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details This model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Made by request: This is a spoon/scraper combo, intended to aid in the collection of THC crystals from a cannabis harvest. Two versions are included, short and long. The long one is 245 mm long, which should fit on most build plates.…
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
Holder for a 35mm Bike Handlebar. Its a Remix but i can't remember the source Thing. I remixed it to fit on a 35mm Handlebar with a Short stem. You can use 2 Cable ties to fix it on the Bar. I placed a small thin part of a bicycle tube…
Ein einfacher Powerbutton für Garmin Oregon 450. Er muss mit TPU oder Flex Material gedruckt und dannach eingeklebt werden. A simple power button for Garmin Oregon 450. It has to be printed with TPU or Flex material and then glued in…
My both Garmin Oregon devices had a known issue: After some years of operation the rubber of the device becomes brittle and the power button gets defect. There are some options to replace the rubber, but with this thing you can just…
This is a 3D scan of Mt. Hood, Oregon optimized for a 3D printer. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .05mm Infill: 5% Filament: Prusament PLA Galaxy Black Category: Scans & Replicas
Im a BIG ducks fan but could not find a lot of stuff to support my ducks so i made my own!
This 3D printed topographic model represents Mount Hood in Oregon, located near the towns of Government Camp and Hood River. The model features exaggerated elevation to highlight the towering peak, surrounding ridges, and glaciers that…
Robust handlebar mount for Garmin Etrex devices on a Canyon roadbike handlebar.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Oregon Ducks Oversized Necklace Logo that I designed. I hope you enjoy!
Repair method and parts for the buttons on the Garmin handheld Oregon 450 GPS unit. This may work with other similar Garmin models as well. Over the years I have found that the rubber over the side buttons on the GPS units can age or wear…
This 3D printed topographic model represents the Boring Lava Field near Happy Valley and Gresham, Oregon, with exaggerated elevation for enhanced visual impact. The model emphasizes prominent buttes like Powell Butte, Gresham Butte, and…
just a custom Oregon trailer hitch cover. doesn't have holes for pin to hold in so I just marked and drilled them. next version will have holes!
University of Oregon Flying O jibbit for crocs. GO DUCKS
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I've made this as I've received a few messages on here asking if there was a way to fix the bed wobble without using triple-z. This is untested as I use triple-z, but…
Oregon Ducks Alternate Oversized Necklace Logo that I designed. I hope you enjoy!
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I created this bracket to fix a Omegon dew controllerbox to the tripod of a Sky Watcher EQ6-R equatorial mount.
Resize to your needs! Use uniform scaling!
SET MINIATURE FANTASY VOL.1 - FIRE SORCERER AND SORCERER STUDENT DEL CULTO DI FUOCO.
The Foregone Catastrophe was the flagship of the Nihil Minister of Protection, General Viess. This model is based on a ship that appears in Star Wars: The High Republic Shadows of Starlight #2. Dimensions Length Width Height Big 196mm…
An insert for The Oregon Trail Card Game to replace the original. Print instructions This remix slightly enlarges the pockets to better fit the cards, die, and marker (they all got stuck in place when I printed the pre-mix). It also has…
This holder clamps on Skywatcher's steel tripod legs and offers a place to store the battery during use. It's made for Skywatcher's steel tripod that comes with EQM-35 mounts and above. Those USB-C PD power tanks can provide up to 12V at…
In order to attach the wheels, you can use a very small nail.
A nice piece of U.S. road nostalgia … celebrating two-lane highways, small towns and pine trees forever.
Echte deutsche Möbel von Hand vermessen und digitalisiert Dieser Kleiderschrank wird definiert von harten Kanten und schlichtem Design. Ideal für ein modernes Diorama Version Massiv Erläuterung Objekt ist innen massiv. Im Slicer erzeugt…
Update (01/14/2020): STL v102 uploaded. This is a protective sheath for an Oregon chainsaw, bar nose, grease dispenser. On Amazon , a customer posted a picture (attached) which shows the body had broken. I sometimes like to put this in my…
Elevated Viewing Height : The monitor stand raises your computer monitor to an ergonomic eye level. By placing the monitor on top of the stand, you reduce strain on your neck and back during extended use. Stability and Support : The base…
Holds 2x green bag boxes and stickers from Oregon's Bottle Drop
four your next Ducks game / tailgate party make some ducks cookies!
Measure could be a little bit off depending on the thickness of your tiles. I added one w/o measurement if you want to customize it.
The Garmin Oregon 6xx and 7xx have a great touch surface, but it also reacts very easily to accidental touch. For example, if you wear the device on your belt, and it touches your pants with the screen. Only if you lock the screen, this…
As requested by GB superfan Conor O'Hare (big thanks to him for this project), this is my best attempt to recreate the extra pieces needed to make Egons's Stethoscope from the Library and "Ready to Believe you Scenes in GB1. What makes…
Here is a can Koozie for the duck fans out there. Standard can dimensions.
I tend to loose these. So I made them. Replacement caps for the dual canister from Oregon (old style). Print Settings Rafts: No Supports: Yes Resolution: 0.16 Infill: 50% Filament: Noyes PLA yellow Notes: Print flat side down using…
This part replaces the power button on a Garmin Oregon 3xx/4xx (probably also other models from the same series). Print the cover from a flexible material like TPU and the pin from a solid material like PLA or PETG. Both parts need a bit…
University of Oregon use to be the Webfoots and then i was changed to the Ducks. this is there original logo.
This is a fridge magnet based on the Oregon Swallowtail butterfly. It has raised sections for easy(ish) coloring if your printer supports multiple colors. There is a cutout for an 8mm magnet on the back. The magnet fits snugly, but you…
Oregon Ducks Drink Koozie
I decided to add a keychain ring for this sweet "love oregon" model Soon to post my makes of the original Oregon with heart models...been painting for days! Category: Keychains
The model solves the problem of breaking chalks and improves use thanks to magnets and a pen holder
Simple design adopted from Chainsawman sequel No.221 Support is required for the square in the word USA.
This 3D printed topographic model represents Honeyman State Park in Oregon, with exaggerated elevation for enhanced visual impact. The model highlights the park’s unique dunes and coastal landscapes, emphasizing the rolling sand dunes,…
this is the University of Oregon Fighting Ducks Logo jibbit
I created this little basic wagon for the Oregon Trail card game. You can place the wagon on the card in play and move the wagon to Oregon. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** Doesn't Matter Supports: Yes…
This Barrel Trays can be use in any board game with similar theme.
Nice state keychains.
This is my design for a single-point bench grinder diamond dresser. Additionally, I have included an adapter so the dresser can be used on an Oregon blade sharpener. The user must supply the diamond shaft and cut ½"-13 threads on the…
This print uses 0.20 mm layer inlay with single extruder multi material setup. 1. Go to Printers > Capabilities > Extruders 2. Select 2 extruders and check Single Extruder Multi Materials 3. Go to Print Settings > Wipe Tower 4. Go to…
Remix of this Omegon battery holder by [Cepadyes] – I tweaked the clamp so it fits my Skywatcher AZ-GTi . Keeps the power bank nice and snug on the tripod, no more dangling cables. Works great for me. 👍 Fits: Mount: Skywatcher AZ-GTi →…
EN Dear makers and forestry workers, Isn't your chainsaw cutting straight? An unevenly worn guide bar could be one of the problems. This tool helps you file the guide bar of your chainsaw to be rectangular. Then you should check if your…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
ACHTUNG !!! Diese Modifikation ist VON STIHL UND OREGON NICHT VORGESEHEN! Der Umbau auf ein Messer eines anderen Herstellers geschieht auf eigene Gefahr! Ich übernehme keine Verantwortung oder Haftung für Sachschäden oder Personenschäden!…
Oregon Keytag for luggage tag or keychain. Print without supports, quick and easy print.
You have died of dysentery. (whoops) Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 **Rafts:** No Supports: No **Infill:** 100%
After some years, the 32,768 kHz crystal needed to be replaced (typical fault for this models). I really like this clock so i choose to repair it. To disassemble the Oregon S. RMR 221 projection clock or the projection weather station…
Die Löcher müssen vorsichtig sauber gefeilt werden sonst passt es nicht wegen den Support resten.
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
The cover plate does not fit on the STROMER ST3 Sport stem! To mount the cover plate on the STROMER ST3 Comfort stem, use the original screws. You need the following material to assemble the plate and the body. 5 x M3 nut 1 x M3 40 mm…
Print upside down No support ABS 0.3mm
The model is designed to mount an original Garmin Oregon Bike Mount on a STROMER ST3 or ST5. It uses the provided stem cover and fits on both stems (Sport and Comfort). The connector parts are not necessary, but they prevent a rotation on…
It's hard fo alligne the polarscope when it isn't illuminated. So I bought the cheapest polarscope light I could find and made myself an adapter for it. have fun :) and cloudless nights ;) Print Settings Rafts: Doesn't Matter Supports: No…
I needed a sportsball themed pendant and put this together in a pinch based off of a small family gift I made a few months ago. How to print 5 colors using the 4 color AMS: Set a pause to happen at the beginning of layer 5. At the pause,…
I got the Oregon 410 chain sharpener and i needed a space for the extra grinding disks and the miscellaneous other tools i got in the package. it should work with other brands. Support only on base necessary, material doesn't matter. I…
So, the plastic spout of my Oregon jerry can decided to crack, hence created a replacement with +- the same dimensions as the original. I didn't need the nose, but made it as well for the sake of completeness. Works great, fuel does not…
Design Concept The Hexagon Pattern Pen Holder features a unique geometric design, combining both functionality and artistic appeal. Its hexagonal pattern ensures durability while adding an elegant touch to your workspace. Purpose This pen…
These are the settings HueForge generated. I used PLA for everything. Had some off brand filament that was not in the list of choices. Using close enough colors should get about the same result. Print at 100% infill with a layer height of…
Oregon Native American Tribes Map This 19-piece topographical map roughly shows where various Native American tribes lived in, what is now, the state of Oregon. The map of Native American Tribes was found at navtive-languages.org . The…
this is a collection of little helpers for Oregon Minitrack holder to place a compass on it to place it in North longer holder for polscope to see Polaris also with mounted camera holder to justage the polscope
This is the crown of Aegon I Targaryen to protect your beverage from flies, wasps and other insects getting into it. The crown is as it is seen in the House of the Dragon series and was created by @riva03 (…
Astegon - Palworld Figurine is a video game character figurine 3d model for collectors, fans of Palworld, and anyone looking to print a detailed character display piece in stl format. Use it for desk and shelf display, tabletop and…
Supports necessary. I had lost the original, then i modeled this interpretation.
🌸 Begonia Plant with Secret Ladybird Lock 🐞 A decorative, interactive plant with hidden mechanics This Begonia plant is more than just a pretty print. The leaves and flower are fully articulating , so the plant can be posed naturally or…
My Oregon's external sensor are a bit olders and they need to replace the battery oftenwith a certain lack of commodities, every time I must reset the base station and is a bit uncozy. So: I designed a rear lid that include the contact…
Replacement battery cover for the Oregon Scientific TW331 timer. This model has built-in custom supports to get the right tolerances on the tiny fins. After printing remove the supports with a sharp blade. Print at 0.2 layers with a 0.4…
This protective case is intended to protect an Oregon Scientific Outdoor Temperature Probe. The innermost measures of the box are 106x66x28mm. The case closes with a perforated lid. Please notice that according to your printer/material,…
This is the art from the last USPSA Major Match I ran in 2019. I had the Adobe Illustrator file, and exported the 3 color layers into .svg format, and imported into TinkerCad to do some layer masking to create stl files for doing a…
I designed this knob to fit the stone height adjuster on an Oregon Blade Grinder. Without the knob, a wrench is required to adjust the stone height. It is more convenient to adjust with a knob. The fit is designed to be very snug so it…
What this is I designed this 3D model to mount a WandererCover V4-EC flat panel/cover on an Omegon Carbon Pro RC 6" OTA. Why it exists (the mounting problem) The main issue is the chamfer on the metal ring/clamp at the end of the…
The plastic covers on my player broke - both the top and bottom. I made replacements.
What came first… the dragon or the Egg? Celebrate Easter with a legendary twist! This 3D printable diorama features Aegon V Targaryen better known as "Egg" standing inside an Easter egg. A nod to A Knight of the Seven Kingdoms .. Perfect…
This is a stand for an vintage Oregon Scientific MOD. EM-913R thermometer/hygrometer. The original stand fell off after just a short time. On one hand, I wanted to honor the fact that this device still works well, even though it is now 32…
A simple friction-fit enclosure for Ben's Board v1.0 & v1.1 5x of printed button required. Double-sided tape suggested to hold board at corners (there are no screws/holes). Base prints best in standard PLA, I used clear PETG for top…
🦆 SCO DUCKS! Bring Oregon Pride to Your Walls! 💚💛 Show off your love for the Oregon Ducks with this awesome 3D printed Oregon Ducks Mascot Lightbox! Featuring the beloved Oregon Duck mascot bursting through the iconic Oregon "O," this…
You have died of dysentery. (whoops) Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 **Rafts:** No Supports: No **Infill:** 100%
I created this little basic wagon for the Oregon Trail card game. You can place the wagon on the card in play and move the wagon to Oregon. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** Doesn't Matter Supports: Yes…
