Counting matching models…
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Adapter for Spyderco Tri-Angle Sharpmaker converts the 30 degree side to 18.5 degrees. Suitable for sharpening kitchen knives.
Here is my take on the tensegrity table, a print in place version ! To tension the mechanism, turn the little nobs in the center using pliers I recommend printing the file with built-in support, they are very easy to remove Printed fine…
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
Custom Chessboard with Extra Features This chessboard is a bit special with its optional built-in defunct Prusa Steel Sheet (MK3.x/MK4.x), allowing you to use magnetic pieces that stay put and don’t slide around during the game. Plus, you…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to build a very smart and low cost geometric lighting system. Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting…
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
Made this 90 degree bend to prevent the bowden tube on the K1 Max from rubbing under the lid, it also provides a cleaner movement of the cable chain. It's loose enough that it shouldn't cause any problems with under extrusion. Made…
As soon as my Core One arrived, it was clear that the easiest way to perform many maintenance tasks is to remove the top panel, but removing and replacing the plastic pop rivets is cumbersome. The solution used for this model is to create…
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…
A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…
Boundary wire install tool robot mower - Verlegehilfe Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to install the boundary wire for your lawnmower into a groove. Groove can be done with the tool in my other models…
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Meet the VICEGRIPTOR! The strongest 3D printable clip at it's size. Zero assembly, zero supports, just functional design. You never would have thought you needed this, but now you do. The VICEGRIPTOR is a clever, print-in-place gadget…
You know what to do with this, no support is needed. will need screws and nuts.
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…
An ergonomic angled foregrip.
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
Still requires print supports on the part where the hot wheels track clips in.
These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…
Updates 2023/04: Improved tolerances on the housing and made the fit a little more forgiving, as some users reported difficulties getting the housing in place (v2.1). This version also includes improved cable clips. Drawer version v2 fits…
TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…
The Shade Foregrip is a vertical foregrip designed for Nerf and Airsoft. This grip can be attached to Picatinny-Rails aswell as Nerf-Rails without any modification or adapter. Notches in the top allow the grip to be locked in different…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
!!Important!! I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here . The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at…
Here you got is the first Deltaprints desk organizer designed with an integrated smartphone holder, compatible with all common phone sizes. It features multiple compartments for pens, office supplies, keys, or any little clutter that…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…
Summary This is a model of a Honda Integra Type R DC2 (JDM) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
UPDATE 19th Apr 2023: Body and Bracket have been replaced by reinforced versions. .stp has been updated too. Rest stays the same. This is the 45°Shade Foregrip an alteration of my vertical foregrip design. It has all the features of the…
Tensegrity Hexagons. Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
Added additional versions; now includes battery holders for AA, AAA, C and 18650 cells (all printed and tested but the 18650 up to now) There is a perfect design out there like this for 18650 - couldn't find this for AA batteries.…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…
I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
Summary This is a model of a Lancia Delta HF Integrale Evoluzione 2 in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhaust ;-) After printing, the model can be assembled with the help of…
So this is the Tone Foregrip. An angled foregrip along the same lines as my Shade Vertical Foregrip, designed for Nerf and Airsoft. The grip prints in four separate pieces, two for the body and two separate panels that can be customized…
This is a print in place tensegrity structure that is held in place by 4 strands of printed filament. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you…
RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
This is a drill guide to aid in 90 deg and 45 deg drilling. Diamond cutouts are on either end to aid in finding measurement lines. The 45 deg guide will intersect at the the center line. All holes accommodate imperial bits. Please be safe…
I designed this smaller foregrip a while ago for a pistol I was working on. It is nearly vertical, at 83°. Use a 6-32 x 1.25" bolt to mount the Picatinny. The Mlok uses 2x 4mm x 20mm screws with mlok t-nuts. Update 10/25/2022: Added a…
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Not everyone likes putting their Apple AirPods Max into the bra between each use. I designed this to provide a place to easily rest your AirPod max headphones. The magnets will sleep the headphones saving your battery. I print this at…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
I printed rcmz's print-in-place (PIP) Tensegrity. Thanks rcmz for sharing this fantastic model! My PIP outcome was pretty humble due to shitty filament, maybe also due to sub-optimized parameters. But throwing 400grams of material with…
Modern and functional desk accessory designed for FDM 3D printing. The 45-degree tilted body and geometric perforated structure provide quick access to writing tools while maintaining a clean, contemporary aesthetic. ☕ Personal &…
A tensegrity print-in-place table that prints without supports. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be able to see the single strands of…
Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…
90 degree PTFE tube guide. Together with the guide, I used https://www.crealitycloud.com/model-detail/657e19d8937557724252afab , reducing the height to 50% and https://www.printables.com/model/734259-creality-k1-k1-max-ptfe-tube-holder I…
This is just a remix of cuzzea's work, eliminating the colder temps that won't work for my PETG (Hatchbox). This one goes 220-260, use cuzzea's exact instructions for setting up the post processing script. Nothing changes except the top…
Holder for Type 2 charger cable where the cable come in from the side, better fit how the cable is looped around the holder. You may want to print this with supports. Edit: I've added a picture of the areas that you may want to have…
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
Material: PLA or PLA+
this is a robust foregrip/handle for picatinny rail
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…
This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…
A version of the Tone Foregrip utilizing two bolts instead of one for a more secure connection. Functionality an design stays mostly the same as the original Tone. Bolts are again M5x30mm. Print Settings Printer Brand: Creality Printer:…
360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm
Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…
I love the Lego Wreath and I am in the process of printing more for Christmas. I needed a jig to align my 6 segment wreaths at a perfect 45 degrees. I traced the original Lego wreath branches to make this jig.
Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip
Tired of managing messy filament tubes and bulky buffers? Here’s a sleek, all-in-one solution built for your MMU3 A compact filament management solution for multi-material printing. I needed a space-saving alternative to the stock Prusa…
Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill
✨ Tensegrity Structure Model – Ready for 3D Printing ✨ This model is based on the principle of Tensegrity (Tensional Integrity), which uses forces of compression and tension to create a striking visual illusion of levitation. The rigid,…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs I have also uploaded a Keymod AFG . Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG , which is an improved version of this one. I made…
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…
I read somewhere that people have had success with removing ghosting/belt lines by positioning the X and Y gantry at 90 degrees during the belt tensioning process. I decided to make a quick model to help hold the gantry in position during…
A Giant Spider Tensegrity Ornament When printing use the 0.3mm layer height and make sure ‘detect thin walls’ is checked. When sliced you should be able to see the single strands of filament and there should be no empty layers. Any…
My new keyboard came without keycaps so I decided to make some. Through a lot of trial and error, I learned how to create some nice keycaps - and that's what this model does. You can learn more about how I arrived at this point and some…
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the rack, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray opening, so…
Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
