Counting matching models…
Here are some files that you can print very quickly to make color coded key ID caps to help quickly identify that key you need on that key ring that has way too many keys. Three popular key types are provided, Kwikset, Schlage SC1 and…
Updates: Sept 06, 2023 There was an error in the thumb cluster PCB where the navigation switch was lacking its common/column pin and was tied to ground - resolved on GitHub for the KiCAD and gerber files. If you have an older PCB, you can…
Video of this project working: This enclosure is intended to hold a PN532 NFC reader along with a Raspberry Pi Zero 2 W for the purpose of reading an Apple HomeKey to unlock or open a door. I'm running the software found here and…
Über die Jahre hat sich herausgestellt, dass die Gummierung des Tasters von SimonsVoss Transpondern sich häufig auflöst. Erste Risse oder Schnitte sind der Anfang, irgendwann ist die Gummierung ganz weg und die Elektronik liegt frei, was…
Always follow Locksport ethics! You must not open a lock that is in use . You should only open locks that belong to you . For other locks, you need express consent of the owner . The security needs of others must be preserved. All…
3D printing tips We printed it using a 0.4 mm nozzle, at 0.2 mm layer height. We used ironing (15% flow rate, 0.1 mm spacing, topmost surface only) to get the smooth results you see in the photos. Filament we used This model was printed…
I needed to rekey a few locks in the house and found a cheap toolset on Amazon. But all the pins came in little plastic bags which are annoying to deal with. So I created a storage container were all the pins can be nicely sorted in. And…
This is an approximation of the original eKey Uno Mounting Plate . I printed it with PETG and used supports under the hole in the middle and under the clip . I used PETG as it is more durable than PLA and more ductile which becomes…
A wall mount for the Ekey Uno Fingerprint I designed. The door lock can be bought on amazon:…
While the eKey Uno is waterproof and has no problems with being rained on, fingerprint recognition is basically impossible if there is water on the sensor. Since we don't have a roof over our eKey Uno, I designed and printed a small roof…
Easily scalable bike keychain, can be printed with PLA or PETG
Customized version of http://www.thingiverse.com/thing:1955876 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1955876 Instructions Using the following options: ring_offset = 1.5 letter_font = Fontdiner…
This tube is used to hold the springs in place so you can rekey a Schlege F series lock. This is a good video on the process:
I have designed this small box to mount an ekey home FS IN 2.1 BT finger scan in a wall. The screws supplied can be used to mount the finger scanner in the box. I printed it in PETG and the fingerscan fit in perfectly. There is a hole in…
It’s an adapter to fit an ekey sline, maybe also an xline, into a 2N mounting module. I printed my surface mounting frame for the 2N IP Verso as well and wanted the same optics for mounting the ekey a little lower for the kids to reach…
This model features 3 Kailh Box Silent Pink mechanical keyboard switches, offering smooth and silent linear action with 35g actuation force. Paired with an ESP32, it delivers a Bluetooth-configurable keyboard that connects seamlessly to a…
i am a NOOB at this. this if my first Model. i not printed this model myself. it will print without any supports.
My ekey uno is installed outdoors without a roof, so I often had to clean the sensor due to rain and street dust to make it work properly. To solve this, I designed this cover. This protects the fingerprint sensor from water and dust,…
Created for a friend, these models include modifications and replacement parts for a wheelchair joystick platform. As a fun surprise, one platform was made LEGO-compatible, allowing him to mount LEGO sets directly onto his chair for a bit…
I’m thrilled to announce the latest update to DriveKeys —version 2! This upgraded version includes: Two 5-direction micro joysticks for more precise and customizable input. An ESP32 Feather v2 (USB-C edition) with Bluetooth capabilities.…
I found a model on Thingiverse for storing YubiKeys but unfortunately the most important part was missing so I created it myself. I know that the 5 NFC and 5Ci fit but the rest I can't confirm because I don't have those models. EDIT: I…
I had a broken arm holder on our Sekey beach trolly so I designed a magnetic one for replacement. Printed in Prusament PETG Galaxy Black with 25% infill. Print with the magnetic face down for more rigidity.
Charger https://www.amazon.de/-/en/dp/B0GYS895L4 Cable https://www.amazon.de/-/en/dp/B0FL82DWSJ Use Tesa 9x0,2mm tape on 3 of the ribs and feet of the charger
Gyroscopekeychain for all those who always need something in hand to play. The pendant can also be personalized.
If you have seen these little handy torque keys, they are cool and come with a round 6 bit holder. I take them on my bike rides, but wanted a more streamlined way to bring the 4 I need, so I did this one. Printed in TPU but havent tuned…
SIEDELE installation frame for ekey fingerprint reader
Customized version of http://www.thingiverse.com/thing:1955876 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1955876 Instructions Using the following options: letter_spacing = 0.5 ring_offset = 1.5…
Gelenkverbinder für den Bollerwagen von Sekey
Gelenkverbinder für den Bollerwagen von Sekey
Mike Hansen from Barbaric Mellons uses an Invacare Torque–style power wheelchair with an ASL 128 Molecule Joystick as his primary drive control. This version of DriveKeys replaces the fixed front section of the drive control mount on his…
This blank plate can be used to turn DriveKeys into a simple resting surface, or as a starting point for designing custom plates and modifications. A STEP version is included to make remixing and customization easier in your preferred CAD…
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the ASL 128 Molecule joystick , allowing the wheelchair’s primary drive control to be installed within the DriveKeys modular…
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate was developed to explore alternative interaction techniques where a lightweight ball can be rolled or displaced to generate motion input. The…
The Void Plate is part of the DriveKeys Modular Wheelchair Platform Collection. It is intended as a prototyping and fixture interface, allowing switches, brackets, sensors, or experimental input devices to be mounted without redesigning…
The DishPlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate provides a small utility surface that can hold items such as a phone, tools, or other everyday objects while maintaining compatibility with the…
The Game Plate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the Evil Controllers XAC & Playstation Access™ controller Mini Thumbstick 3.5mm , allowing the DriveKeys platform to function…
On my handcart, the locking mechanism had worn out over time, meaning you could no longer lock the handle at the different lengths. So I recreated it and improved it slightly. Please print it exactly as shown in the slicer image so that…
Mike Hansen from Barbaric Mellons uses an Invacare Torque–style power wheelchair with an ASL 128 Molecule Joystick as his primary drive control. This version of DriveKeys replaces the fixed front section of the drive control mount on his…
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the ASL 128 Molecule joystick , allowing the wheelchair’s primary drive control to be installed within the DriveKeys modular…
The Game Plate is part of the DriveKeys Modular Wheelchair Platform Collection. This plate is designed to mount the Evil Controllers XAC & Playstation Access™ controller Mini Thumbstick 3.5mm , allowing the DriveKeys platform to function…
These miniature pin-tumbler tweezers are designed for industry-standard 0.115" pins. The plug follower is meant for 0.495" plugs, as used by most lock makers. These tools will fit in an Altoids tin with room to spare. I suggest using…
WeeKey 9K is a DIY macro pad designed over the span of about a week or two. made to use a Raspberry Pi Pico (or similar MCU) for basic input and control software for macro assignments. The full build guide and code can be found on my…
Customized version of http://www.thingiverse.com/thing:1955876 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1955876 Instructions Using the following options: name = SOPHIE letter_font = Fontdiner Swanky…
Customized version of http://www.thingiverse.com/thing:1955876 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1955876 Instructions Using the following options: ring_offset = 1.5 ring_thickness = 1.2…
Customized version of http://www.thingiverse.com/thing:1955876 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1955876 Instructions Using the following options: keychain_thickness = 4 ring_offset = 1.5…
gameKey Ergonomic Controller joystick case with support
joystick mod - gameKey Ergonomic Controller https://www.printables.com/model/453171-xbox-elite-2-joystick-cap joystick stl file from https://www.thingiverse.com/thing:3372106
It's abviously a keychain but also a boxcutter. Sharp enough to cut any boxtape or other packaging stuff that keeps you seperated from your precious box content. But it will not cut your fingers or poke you when you keep it in your…
HomeKey was recently reverse engineered, you can find a link to that here: https://github.com/kormax/apple-home-key-reader I needed a case to mount outside my home and I couldn't find one that looked clean enough so here's my take on it.…
This is the 5th iteration of DriveKeys , a collaboration project with Mike Hansen from Barbaric Mellons . Mike also designed my popular Prosthetic Breast model ! This version of DriveKeys mounts to his chair exactly like the original…
Ein Gehäuse für ein D1 mini und ein PN532 NFC Modul. Von unten verschraubt und mit Öffnung für ein mini USB. Ich öffne damit über mein iPhone oder über meine Apple Wach mein Hoftor.
Изготовлена из прочного материала, имеет удобные крючки, идеально подходит для хранения ключей. Надпись «HOUSE» добавляет уютной атмосферы, делая этот аксессуар не только функциональным, но и эстетичным. Удобство монтажа обеспечивается…
