Counting matching models…
A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+
This is my small case made for an ESP8266 NodeMCU board. It can be usefull for IoT or smarthome aplications, where the ESP doesn't need to have many connections apart from the USB cord. The Model also comes in some variations (e.g. an…
Case for my NodeMCU (ESP8266) which I'm using together with DS18B20 to measure temperature in the swimming pool. On the ESP is running ESP Home reading temperature from DS18B20 and sending it to the Home Assistant when it is processed and…
About: Remix of Multisensor ESP32-WROOM-32 NodeMCU ESPresense by teaser : Added camera hole (10mm hole) Expanded area for extended builtin wifi antenna on modern nodemcu boards that protrudes outside of the dev board Wider hole to connect…
Converting the lathe for 5mm wide synchronous belt. Printed a mock-up from PE, but I did use them for real lathe work as well without problems. Lathe pulley has 14x1mm thread. Motor axle 14mm with 5mm key.
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…
Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…
This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.
Needed a case and didn't find one I liked so I designed my own. I wanted something very minimal with thinner walls to reduce print time and material used. There is a port on the bottom of the case for wires to feed through as well as a…
just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0
Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…
I liked the case plasmata designed, but needed more space beneath for easier pin access. This version provides more space and an unnecessary vent on the lid. ***UPDATE: Added a base version with two holes for wire access.
My first take on building my own sensor for presence detection in our rooms. All cases I tried either didn't fit the board or weren't able to house the sensors. So I designed one myself. It fits the AZDelivery ESP32 NodeMCU…
This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…
There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…
I wouldn't trust this in anything but PC or nylon or something along those lines. I printed this out of PC. The stemcap was tested and held over 11Nm of torque which is more than should ever be applied. I've tested it on a few mountain…
A remix scaled up a bit to fit an ESP32 nodemcu Category: Electronics
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
I wasn't entirely happy with other models, so I created my own. minimal size to protect all header pins cutouts for USB port, the 2 buttons and Dupont connectors You just need 2x countersunk M3 screws or friction fit the top (for this you…
This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…
The purpose of this project is to create an inexpensive audio player for home assistant that can be plugged into an existing stereo speaker system. With this system, you can also build a simple mono amplified speaker that can be used as a…
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…
This is a housing for a NoceMCU v3 and an HC-SR04 ultrasonic distance sensor. The lid will stay on when held upside down, but it's easy to remove. I designed this together with my son as an introduction to 3D modeling. Print Settings…
E5Plus Cable support Kabelführung Hotend Ender 5 Plus Klemco MicroSwiss original Hotend English A friend of mine, Johannes Loibl , designed this great cable holder. And it's too good not to share with you. Johannes allowed me to share…
Rafts: No Supports: Yes Infill: 20%
This is a case for holding a NodeMCU v3 and 4x 7-segment MAX7219 8x8 led matrix. NOTE : The holes for the NodeMCU board are not properly aligned. The board fits but screws are a little angled. Will fix soon. Category: Electronics
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
Hi guys, this is a simple case for the Wemos D1 Mini (NodeMCU ESP8266) . Route the cables through the case bottom before you solder them to the Wemos D1 Mini. Easily resized and customized in Fusion360 with the provided .f3d file.…
a simple ESP8266 case Designed for use with WLED firmware Assembly instruction Print the case Solder power and data pin to the NodeMCU pull the cable through the hole in the back put the MCU board into the bottom part of the case put the…
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…
Display box for 4xMAX7219 (Multi filamente + Single filament version) You can use PLA, PETG or others but of a light color (recommended white) , since the screen has 0.8mm of plastic in front that is used as a diffuser. MMU version…
A case for housing a NodeMCU (ESP8266) board with enough room for cable management. I added holes on both sides to get your sensor cables out of the case, if needed. The case is also high enough to house all of your cable mess. Walls are…
petit adaptateur a mettre sur le chemconect pour visé la led besway ,possibilité d'installer 2 adaptateur pour 2 lumiere LED sur un chemconect a imprimé en PETG
The lid snaps in, just screws for mounting the electronics required
This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…
Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…
This is my rendition of a case with lid for the ESP32S NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32S board, and also a squeezed fit for the DHT11 sensor. Also,…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
Case for an ESP8266 NodeMCU with micro-usb connector. Press-fits together. If it is too lose, apply a drop of glue.
I've designed this case for the NodeMCU V3.2 Arduino ESP8266 (Lolin/Wemos), with a bit of space for a sensor. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics
Warning: You won't be able to access the Micro USB port with this enclosure! I modified this housing to be quite a bit slimmer, but it still has enough space for a level shifter and a 24V to 5V step down module. That's why the opening for…
the idea of the chambering rod pilot is that you only have to measure it once and then you can clamp down the pilot to the metal rod. so it’s 1 solid piece. the garlic filter frame is for the case you like to make a filter your self. and…
40mm Fan Adapter for 1U Servers to swap the superloud fans with 40mm (20mm wide) silent fans. If your server fan is 40mm wide and 56mm long, this is the exact replacement. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…
Remix of the Case from don frechdachs for Wemos D1 Mini (NodeMCU ESP8266) . I've added a cutout for the USB port. Compatible with the Wemos D1 Mini as seen here:…
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
Case for a PIR sensor large enough to contain a nodemcu
Modified for esp8266(with no letters) NodeMCU PCB size is about 58mm X 31.1mm It fits quite tight. A bit hard to remove from the case.
Remixed techniczny's case to fit with my specific nodemcu and relay module nodemcu used: AZDelivery NodeMCU Lua Amica Modul V2 ESP8266 ESP-12F relay used: AZDelivery 2-relay module 5V with optocoupler low-level-trigger 3 versions uploaded…
A simple wall mount for the Virgin Media wifi extender Sagemcom f266v2LG-VMB.
Simple, well fitted enclosure for NodeMCU. Designed to fit Voron DIN rail clip. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl To assembly you need 4xm3x16mm screws, 4xm3 nuts, 2xm2x10mm self…
ESP-32 Dev Kit C NodeMCU - Cover for WiFi Repeater . Filament eSun PLA+ Black
This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…
Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
A case design for NodeMcu V2, Amica This Design is base on the design from Crashoverride, published Jan 30, 2016 https://www.thingiverse.com/thing:1305796 Category: DIY
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
imported from thingiverse. remix: https://www.thingiverse.com/thing:4515152 Enclosure for a NodeMCU v3 board with space for a connector to a strip of addressable LEDs. Powered via an external 5V USB power supply. Suitable for powering LED…
I made this case to house nodemcu with esp3d installed for my delta. There are two variants - w_2020_mount is intended to be mounted on 2020 profile. Screws needed are M2x6 Category: 3D Printer Accessories
Created an enclosure for the slightly larger NodeMCU, specifically this one: https://www.aliexpress.com/item/5PCS-V3-CH340-Wireless-module-NodeMcu-Lua-WIFI-Internet-of-Things-development-board-based-ESP8266-esp/32794607540.html My NodeMCU…
V2 - 04/11/21 I haven't printed this new version yet. Updates are: Added slit in the screw poles in the main body to add a nut, so it keeps the lid and body together much tighter without straining the plastic too much. Made walls slightly…
I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti 32oz cup. Its not a snug fit which allows room for something slightly bigger. I installed this in my 2016 gemcar and…
just added 15 mm of height
Simple and small NodeMCU(ESP8266) and DHT22 case. 4x bolt m3x12mm The DHT22 is very close to the ESP. Create a code to put the ESP in “Sleep”. Then it will work fine!
The default klemco design has one arm for the fan and another for the bl touch arm. This moved the bltouch to the far edge of the build plate. I combined them into one arm so the bl touch isnt on the edge of the bed.
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
This wall mounted shelf and support strap were designed to mount a T-Mobile Home Internet router to your wall. Designed to hold the Sagemcom routers. Can be printed with no supports.
A slim case for the ESP8266 NodeMcu V3 CH340 micro-USB micro controller boards I picked up on AliExpress NodeMcu-CH340-V3 . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for 0.2mm…
Wall mount shelf that fits a cable modem "Sagemcom WiFi Hub C2 - F@ST 3890V3 CHWU" The supports below the shelf doubles as convenient points to tie the cables to. The hexagonal holes in the shelf are for ventilation, as the modem has…
Two of the change gears in the thread-cutting / feed gearbox on our Emco Maximat Super11 lathe at Stockholm Makerspace had broken teeth after a crash, and spares were very hard to get, so I designed and printed these change gears. They…
Made this enclosure for quick prototyping for CH340 Chip NodeMCUs. It has kinda snap to fit function but do not rely on that :) Hope it does help. Also attached step file so feel free to modify. Material eSun PLA+ Black Hotend Temp 215…
Grain cart Demco 1300/22 Welker farms at scale 1/32 glue the two cart half together use 2x M3x16 (selftapping) to assemble the two parts of the frame. use 2x M3x8 (selftapping) to assemble the wheels mount the cart on the frame and put…
This is a case for an ESP8266 NodeMCU v3 from LoLin. This Case uses no screws. Everything fints in because of friction fit. It is made for Spacehuhn's espdeauther. All credits belongs to Spacehuhn!…
I've recently upgraded to an SKR Mini E3 V3 board and had an ESP8266 lying aound, so I decided to set up ESP3D and put it in a box attached to the middle extrusion. Features: Dupont connectors are accessible, but not exposed. The top is…
Holder for Sagemcom 5670 AX router. I designed more bases so that new holes do not have to be drilled in the wall. There is also a pin for winding the cable.
In order to calibrate the SPL readings of your Beyerdynamic MM 1 measurement microphone, you need an acoustical calibrator, like the iSEMcon SC-1. However, the MM-1 is an odd duck: It has neither the common ¼" or ½" microphone head…
Erweiterung einer EMCO Unimat SL zu einer CNC Drehmaschine. Bei diesem Umbau geht kein Verfahrwege der Maschine verloren. Die Handräder können weiterverwendet werden. Die Z-Achse wurde an dem optionalen automatischen Vorschub der Unimat…
This is a bin für D1 Mini NodeMCU V3 which fits into the gridfinity system and is also stackable with other bins.
A case/cover/shell for NodeMCU (ESP-12E) For V2 CP2102
GrabCAD(Get The STP File): https://grabcad.com/library/esp8266-nodemcu-lua-case-1 Print Settings Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Category: Gadgets
The wonderful EMCO Unimat 3 lathe, for all its extensive set of attachments never had anything resembling a back gear nor did it have the analog of the slow speed pulley bracket available for the earlier Unimat SL. This pulley set is an…
Suitable for DREMC cardboard spools with holes cut out allow you store filament loosen end without the need to remove the plastic ring. More Information:…
This case is for a NodeMCU ESP8226 V3 Lolin module. The lid is inserted under preassure. The model has 2 parts, the case and the lid.
Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…
Simple case for NodeMcu v3 (LoLin). Inspired by the other cases, build from scratch. It has openings for the IO and the USB, as well as for the reset and flash buttons. Closes nice and tight - no need to add bolts or tape to keep it…
Since I could not find a case to fit my Plusivo NodeMCU v0.9 boards, I adapted one. The ideea is based on two Tinkercad designs: The cutout in the top of the case (I re-used this for the cutout) :…
This is a work in progress. I remixed the excellent Fan Duct of Eddy Emck for a Volcano hot-end https://www.thingiverse.com/thing:3936815 Just print it on the flat side no support needed (maybe for the tabs). Mirror it to have both side ;)
Prints either way, depends on whether your top or bottom layer is the nicest and most smooth. 0.2mm resolution is fine. Source file on OnShape
Change gears for Emco Super 11. There is also a stand for storage. Here are the print parameters I used, change as you see fit. I printed them one at a time to avoid any stringing/blobs on the outside of the gears. PLA 5 perimeters 30%…
NodeMCU case with lid, DS18B20 doesn't contact with model.
Just another box to put your Nodemcu together with a Meanwell 15W 5V power supply :-)
Found this ESP8266 nodeMCU case and wanted to use it for my co2 level monitoring system at home. I added a build in housing for a SCD40 (same format as SCD41) co2/temperature/humidity sensor and a screwbase for easy wall mounting using…
A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…
a simple box to hold an Amica nodeMCU (v2) Category: Electronics
