158 models
Emma is based on a Container Ship but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but…
This is a low profile ceiling rose for pendant lamps similar to the one included in the IKEA HEMMA cord set. I like the practical design and cheap price of the Hemma ceiling light suspension, but the ceiling rose is far too big and bulky…
Origin: I used the letters from this model to create Name tags as little gifts. I added small holes in the capital letters to screw in a small screw hooks, which can be attached to key rings. Printing: I used a layer height of 0.12mm and…
Introduction The original design of the “Sunquest” sundial was derived from a traditional armillary sphere, featuring an axis parallel to that of the Earth and multiple nested rings representing latitude, longitude, the celestial equator,…
Going for a walk with the kid(s) is nice. Being able to bring your morningcoffe or tee with you, priceless! The cupholder is designed in two pieces: The holder - clips in place and secures itself on the frame with a hook on the existing…
For now I have designed three lamp holders for the ikea hemma but I will add others ... they screw directly to the thread of the ikea hemma M40x2.5 and you can make one with a total cost of less than 10 euros. I recommend to print the…
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
My Emma Keychain Layer Change At Layer 11 Printed On A Ender 3 Neo
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Emma is 174 mm long x 50 mm high x 20 mm deep. It is made SketchUp 2015 with the Arial bold font. I print it in PLA.
Ciao a tutti, ho creato questo stemma per celebrare lo scudetto del Napoli 2022/2023. Troverete lo stemma completo in formato step ed in formato 3mf che contiene al suo interno tutte le parti che lo compongono. Infine ci sono tutti gli…
Summary Simply replace your original flat plate analemma part with this curved plate model to improve the performance & aesthetics of your existing heliochronometer sundial. Please note that this design is only compatible with…
The sun traces a shape in the sky throughout the year, and that shape is called an analemma. They are challenging to capture in an image, because they require a camera in the same place and orientation for an entire year, and the…
Video: Guide: https://learn.adafruit.com/feather-tft-stemma-case 3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2. TFT Feather ESP32-S2 https://www.adafruit.com/product/5300 BMP280 Stemma QT…
Replacement for the screw cring to hold a lamp shade for Ikea Hemma. The dimensions resemble those of the original ring. I printed my test print with the fuzzy surface by Prusa Slicer, giving it more grip when screwing it together. The…
The quite large lamp canopy of IKEA Hemma didn't fit our beamed ceiling, so I designed a smaller diameter (110mm) and overall size. The original cord routing screws in very well. Drawing is not fully defined, excuse for not being fully…
Emma Bookmark. Created by the children of Fab Lab León. Printed with Prusament PLA
Summary Just replace your original flat or curved plate vertical analemma arm with this larger curved model and add a tilt capability to your Nodus. Please note that this design is only compatible with northern-hemisphere…
The model exists of two pieces. Forst print the clamp on mount. See print orientation in picture 3. Next print the cup holder. It is important to add a pause to the gcode before printing the ceiling of the cup holder slot. See picture 2.…
use for lamp or coin bank! print 0.2 if use as led lamp print with +3 wall perimeters
Cupholder for Emmaljunga Sento Max 2024 model. Printed in PETG but PLA should be fine aswell.
I loved the way the original looked but had to recreate it from scratch to make it fit on an IKEA Hemma Lamp. I also had to modify the angles to be able to fit the huge light bulb that I had. Requires superglue.
i wanted a large light shade for my Led hemma light Print instructions I recommend printing with 0.6 nozzle .3 layer height due to size. 10% Infill with a low temp LED PLA will work if you are printing a full size. PC if your printing…
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
LICENSE Copyright © Herr Brain 2023. This source describes Open Hardware and is licensed under the CERN-OHL-P v2 . You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2…
These are just some blocks I whipped up for my daughter to play with. Maybe someday I'll get around to doing numbers as well.
Ikea Hemma lamp socket thread cover.
Scroll down for the english translation… “ EMMA ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
Mujika’s secretive gift to Emma. The key to unlocking mysteries of the demon world and forging covenants. Print Settings Printer: Elegoo Saturn Rafts: No Supports: No Resolution: 0.05 Infill: None Filament: None Photopolymer Resin Grey…
NeoPixel LED Jewelry In this project, we've built a Legend of Zelda themed pendant using GEMMA M0 and a NeoPixel Jewel. This wearable necklace features the Sheikah symbol and glows nicely making a chic accessory. The parts are 3D printed…
Pomůcka pro vyjmutí uŠup/Qwiic/STEMMA (JST-SH) a konektorů baterie (JST-PH) Konektory JST-SH, které používají uŠup/Qwiic/STEMMA jsou populární, protože obsahují zámek a není možné je přetočit (přepólovat) a jsou zároveň velmi malé - což…
This is a little fun project and probably my last submission for the ongoing "Let there be light!" contest - the Giant Hot End Lamp, a fun lamp for your printing booth! There are 3 different versions for the heater block available (Open…
I needed to attach a IKEA Hemma ceiling lamp directly to the ceiling- without a steel hook as called for in the directions. This model allows you to do this. The orientation in the model is how I printed it to maximize part strength. I'd…
A slightly maximalist remix of the awesomely simple Raspberry Pi stand by Adafruit, for those situations where you just need ALL THE THINGS. Or, like, more of them anyway. Original:…
This elegantly designed emma nameplate is a functional 3D printed product that adds style to modern interior decor. Designed with clean lines and a minimalist approach, it is ideal for desktop or bookshelf as a decorative accessory. With…
If you want to color the name Emma, insert a pause between layer 21 and 22
Emma Grace Frost es un personaje que aparece en los cómics estadounidenses publicados por Marvel Comics . Creada por el escritor Chris Claremont y el dibujante y coguionista John Byrne , el personaje apareció por primera vez en The…
This is the first thing I made while learning to use 3d modeling software. It is a block that has the word (EMMA) removed, and the corresponding letters that fit inside. I made it using PETG and my Mini+. I printed the block and the…
We wanted a simple and light case that protected Gemma M0, allowed access to the Reset button, On/Off, Power and USB. But since the batteries we are using are bigger than the ones that fit in the Adafruit designed case, that one wouldn't…
STEMMA HARLEY-DAVIDSON Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
shade printed with 0.8 nozzle 0.32 layer hight in vase/spiral mode ring and hooks 0.4 nozzle 0.2 layer hight easy install! just click the hooks on to the frame these are printed with : Esilk-PLA white from esun
This is a lamp designed for the IKEA HEMMA style lamps. It consists on an inner ring and 10 City blades. Cities: ROME DUBAI NEW YORK BARCELONA SYDNEY PRAGUE PARIS TOKYO LONDON MOSCOW ASSEMBLY: Just press fit the blades into the inner ring…
Lampshade fits to hemma ikea lamp with rhombus pattern, I've made 2 versions. Print instructions Layer height: 0.2mm Perimeter: walls - 4 , top - 5. bottom 4. Infill: no matter The assembly is very simple - attached it to "HEMMA" OR…
This ceiling hook is designed to fit the mounting holes in the plastic bracket of an IKEA HEMMA ceiling lamp. I created it as a quick replacement when I did not have a suitable hook available. Important: Print with as high an infill as…
The perfect sidearm for a pint sized demon hunting hero ready to face the music! RIP Goldy Pond Arc T=T Model printed on a FDM printer and assembled with superglue. Print was done in silky silver PLA and painted with a variety of browns,…
Modeled in Rhino and Grasshopper and printed on a Bambu Lab A1 mini, this minimalist planter is perfect for small succulents and cacti. Standard Bambu settings work great, but feel free to tweak the parameters to get the best result. It…
Dominion Karemma Ship as seen in Star Trek Deep Space Nine. For best look print vertically. Some supports needed. Feel free to check out my other Star Trek related models in this collection:…
A smaller version of the standard Ikea Hemma cable cover - choose between three different cable outlets (none, one, two) for connecting lamps. Print instructions Category: Household Print Settings Printer Brand: Anycubic Printer: Kossel…
The base of the Ikea Pendant lights (https://www.ikea.com/ca/en/p/ikea-ps-2014-pendant-lamp-white-copper-color-30311492) does not leave much space for hiding mistakes when cutting drywall sheets. Instead of recutting the gypsum panel I…
I made an oak step stool for my little girl to help her reach countertops and sinks. As she got older and I printed more and more toy accessories for her Barbie's and LOL Dolls, she asked if I could make her a Barbie sized step stool. So…
A light fixture to clip on to a fishtank or terrarium with glass that's approximately 5mm thick
Ihr benötigt noch Hutschienenhalter zum befestigen: Link und Gewinde zum Einschmelzen: Link ich habe das Teil auf der Seite stehend gedruckt, so hat man nur am Rand auf der Innenseite die Spuren vom Support
This is an Ikea Hemma cord set ceiling adapter for an 85% version of Frank Drescher's Moon Lamp . I used it so I could hang a downscaled version of the Moon Lamp I printed on my Prusa Mini using the hardware I had. To make it work I used…
This screw is a remake of the original one that is supposed to come with the light shades, we bought multiple ones but for some reason one of the shades didn't come with one, instead of going back to the store i picked up the calipers and…
Diseño Estos adornos navideños personalizados presentan nombres individuales rodeados de un elegante diseño de copo de nieve, creando una combinación perfecta de personalización y temática festiva. Uso Estos archivos están diseñados para…
More than 5,5Kg in empty stroller! English and german summary below! Give a Like, Post a Make and Tip me baby one more time! Deutsch: Wer einen Emmaljunga NXT90 Kinderwagen hat, weiß, dass der Kinderwagen schon einen großen Stauraum hat.…
Shipper's Dilemma Puzzle John Conway devised this tricky puzzle. Can you fit all 17 blocks into a cube? (be careful the image of the photograph attached is staged, not a valid solution) This is a more advanced version of another puzzle:…
The Emma necklace from the Promised Neverland Manga.
Původní model je velmi precizně udělaný. Ale přidal jsem další pružný element.
a Gemma M0 plate in Step format to use it in your own designs
Diesen Clip habe ich für den oben genannten Staubsauger angefertigt. Dieser ist minimal enger als das eigentliche Rohr. Man sollte auch den Clip an das Rohr ansetzen und das Rohr von innen dann mit einem Föhn erwärmen, um zu…
I recreated the IKEA Hemma Lamp Thread Cover in CAD so that anyone who wants to can build on it for their own creation. I am adding a 32mm version as well, although the DWG can easily be modified by cutting or adding 2.5mm sections from…
The original IKEA adapter broke after a few month on all of my lamps. This one replaces the original adapter by a robust screw fitting.
In the photo I used the mount on a base for my environmental sensor array. The SHT41 sits in the mount. Above that is the mount with nothing in it (waiting for a TSL2591). I hope you find this useful in your electronic projects. Click on…
This design is compatible with the northern hemisphere only. The Southern hemisphere version is available here: https://www.printables.com/model/1461533-print-friendly-curved-analemma-vertical-plate-for No post-processing (other than…
A geometrically intriguing Lamp. It consists of four cubes interlocked in each other to form a geometrically pleasing pattern. The theoretical fitting shpere would have a diameter of over 60cm, but as all the corners are rounded, its a…
English and german summary below! Give a Like, Post a Make and Tip me baby one more time! Deutsch: Wer einen Emmaljunga NXT90 Kinderwagen hat und einen Cupholder von Babydream (Rossmann 6-7€) besitzt, wird diesen Cupholder lieben! Die…
einkaufswagenchip in 3d builder mit hilfevon google, photoshop elements2,und natürlich Tinkercad erstellt^^
From wikipedia: The Gemma Augustea (Latin, Gem of Augustus) is an ancient Roman low-relief cameo engraved gem cut from a double-layered Arabian onyx stone. It is commonly agreed that the gem cutter who created it was either Dioscurides or…
A small Tag to be labeled (designed for DYMO 32x57 label) that can be magentically attached to the IKEA Hemmafixare-Box. Printed in PLA or PETG. Supports are needed for the magnet-holes. For best sticker adhesion ironing is recommended !…
HARLEY STEMMA HOG Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Die Lokomotive Emma aus der bekannten Serie. Das Design kann in der Größe variiert werden, es sind auch farbige Einzelteile zum gesonderten Druck vorhanden.
Cake topper per mia nipote Emma. Magari può servire a qualcun'altro!
I have been making a Neopixel Ring Gemma Light for a long time. This part can be connected to various kinds of projects. Hopefully, leave me feedback. I will update ASAP. Thanks! Last updated on 20200113_21:35
Gem Ear ring - orecchini con gemma, nice and elegant ear ring easy to print. Print it as a nice gift for your partner :) Print instructions: Use PLA or PVB Use 0,15 mm layer height with 15% infill No support o brim needed
My grandson loves trains. Recently we discovered a show on YouTube called Crotoonia and he loves those train characters. We have been making some of these trains by converting off-the-shelf trains into these little gems! This one is of…
Original model made by V. Mikael in 2019. Credits go to him. Fits perfectly, big thanks. Uploaded here to ensure availability, please report if upload is offensive. Fits Emmaljunga Scooter 3 & 4. Part is mirrored for other side. Printed…
emma namens schild, was man von beiden seiten lesen kann
Designed this durable adapter to make Dress Up body S split-top torso compatible with Emma Sousai Shojo Teien Action Figure bottom. Easy print, no support. Recommended 0.12mm layer and slower speed for durability. I'm cutting T-bar from…
So wife asked for a cupholder for our stroller, and I thought it would be funnier to create my own that we can use and modify. End-result is quite nice, however my printer (Sovol SV07) can't really handle curves and radiuses too well……
Summary Simply replace your original flat or smaller curve plate analemma with this larger curved plate model to improve the reading accuracy of your existing southern-hemisphere heliochronometer sundial. Please note that this design is…
Emmanuel People ask me why I drive a manual; I tell them it's not a manual. It's Emmanuel. Printing Infill 20% 3 walls Supports print knob with magnetic face down insert 6mm x 2mm magnet at layer 2.64mm (hat and knob) Assembly Screw onto…
Schlauchadapter / Klemmanschluss 1/2Zoll (innen-)Gewinde Adapter zum anschrauben an einen Gartenschlauch 1/2'' / 13mm. An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch…
This is a case for the 3-Thumb Mod Dilemma by Dixls , a mod of the Dilemma keyboard by BastardKB . I like to call it the Trilemma, for obvious reasons :p I designed the case off of the STEP file I generated in Kicad from the PCB files and…
Stemma QT - Sensor Soil Mount This is a mounting piece to stick Adafruit Stemma QT style sensors into soil. It was specifically designed to fit sensors like the BH1750 or AHT20 Brightness / Temperature / Humidity sensors in combination…
Designed this durable adapter to make Dress Up body S bottom compatible with Emma Sousai Shojo Teien Action Figure. Easy print, no support. You will also need 4mm-to-5mm neck adapter from MegamiDevice BusterDoll kit. Alternatively,…
I made a keychain with the name "Emma" and a bee. I did filament color changes. This gcode is designed for max speed on an Ender 3 v3 SE.
It's simple, it just takes time! This design resembles a vertical sun dial that can face East, West or South. Use it as a fixed tool to trace the movement of the sun. Grab a paper (or equivalent) and trace the shadow cast by the indicator…
Customized version of http://www.thingiverse.com/thing:46735 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46735 Instructions Using the following options: sections = 25 inner_radius = 50 length = 12…
Improved nightstand box for the ikea hemma lamp. I redesigned the box in onshape and was much happier with the results. Probably could use more perimeters, this printed in white is a little see through but works fine. Print Settings…
Summary Simply replace your original flat plate analemma part with this curved plate model to improve the performance & aesthetics of your existing heliochronometer sundial. Please note that this design is only compatible with…
When my kid was in the winter bunting bag and with winter overalls the bumper bar was too tight, so I made this extender piece to make it bigger. Yellow part in picture. One for the left and one for the right side are needed. Print the…
Trailer suitable for Emma train (OS Railway). The trailer uses the same chassis components as the train itself. Have Fun :-)
This 3D analemma replaces the original 2-faced Schmoyer analemma & doesn't require any rotation or alignment to accurately display the time. You just need to read the appropriate shadow edge against the main dial crescent; i.e. left or…
This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any equivalent) and the 2 matching butterfly nuts in order to assemble it. There is a 7 mm…
Everything was created from scratch except for the diamond/jewel. The diamond/jewel is modified from https://www.thingiverse.com/thing:1831464 (scaled and text removed). Includes: 2-piece box organizer (204mm wide) Corruption token (for…
Multi-layer name tag with bold text, a contrasting outline, and white four-point sparkle stars scattered around the design.
![[v2.2] QtQwiicCliq - DIN mount for Stemma Qt/Qwiic/Thing Plus/Feather/Raspberry Pi Zero](https://media.printables.com/media/prints/512753/images/4155220_203b39bf-2534-4a34-bd72-fcf5323b0e6e/pxl_20230625_030245459.jpg)
