Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…
Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…
I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…
Model Updated, addressing all the issues with this STL. Please check out the link for the NEW VERSION: https://www.printables.com/model/686627-new-version-ayodhya-ram-temple-no-supports-reduire Print Model Description: This Hindu temple…
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Template for equal distances on the stitch.
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. Print Instructions: Infill: 15% Layer…
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Bullet journal template Bullet journaling is a customisable organisation system that combines a planner, diary, and to-do list in a single notebook to enhance productivity and track personal goals. I've created this template to speed up…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
TL;DR Ultimate Temp Tower series, brutal fast and less than 10g of material used, don't guess and hope anymore, measure the best temperature for a given printer, filament, nozzle combination. update 2023.0807 swatch cases to store the…
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
Update 25th June: made the keyring hole a bit bigger, fixed issue with orientation: apparently the model was rotated a bit upon export to stl Description: Redesigned RCM jig, based on thing 2877484 but redesigned from scratch with…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
Disclaimer: This design is inspired by the Spirograph drawing toy. 'Spirograph' is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc. A simple Spirograph drawing template gear kit that leads to…
Another handy model for those of us whom are beginners to CAD. I use TinkerCAD mostly, and this is an easy way to make a cutout in your projects for a USBC Female receptacle.
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. I recommend printing it upside down for…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower. I added a new file with temperature from 230 to 200 degrees. You can use this file to…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Please don't forget to like the model if you find it useful. Thanks!
Sliced at .2 mm (Quality) profile. temp change will happen, you dont have to do anything.
I wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table. I also…
I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !! look at my other Chest https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and- - Infill 15% - Support yes
Desiged this tower in freecad after the model of already existing examples
A lone warrior sits in silence, armor worn by countless hunts across the Outer Rim. This is no triumphant pose… only a Mandalorian at rest, burdened by creed, contracts, and the weight of a galaxy that never stops taking. Bound by the…
When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…
Background The standard gridfinity designs are great for tools and heavier objects however they are overkill for small part bins. Current approach to light weight the designs are currently limited, eg. Vase Mode limited to single 1x1…
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
***IMPORTAED FROM THINGVERSE*** Just stick together using a glue and make use as you want... Enjoy.... Print Settings Printer brand: Creality Printer: CR-10 MAX Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: FlashForge…
Included is a ready-made gcode for Ender 3 V2 temp tower for PLA. Bottom layer (below the test tower) is at 205 to ensure adhesion as print starts. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps.…
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
No supports I wanted to add a few more things to test on a temp tower and also use minimal filament. I came up with this fever dream abomination. Enjoy! Instagram https://www.instagram.com/spitzspot/ Print instructions Category: 3D…
New (September 2023): For those who don't want to use Fusion360 - there are now .step files for all boxes from 1x1 to 10x10 available. This is a remix of the original bins by Zack Freedman that you can find here:…
Update: v1.9.6 10-10-25: Test cutouts on the backside are back! Somewhere around v1.8 I left a “*” character in the code while debugging that made them disappear. My “Improved All-In-One Temperature and Bridging Tower” is very popular but…
Thanks to Zack Freedman for the awesome Gridfinity concept. I remade it in SolidWorks for easy configuring. Just use the equations to change the x and y size, and the depth to move the main extrusion down. then add your features for…
Design your own side panels with these P1P frame model templates, provided in STP format (3DM available on our wiki). Unleash your creativity. We can't wait to see what you'll be able to create !
About YATT - Yet Another Temp Tower is not too different from other temp towers available. However, it features a bridging test as well as a 55 degree overhangs test. It is also stackable so you can keep your printed temp towers for…
Flowchart template in two sizes. See also: Template For Logic Diagrams https://www.printables.com/cs/model/777808-template-for-logic-diagrams Template For Electrical Diagrams…
Pre-Sliced the Temp-Tower with the Standard PETG Profile in PrusaSlicer and added the temperature changes accordingly. USE THE .GCODE ONLY IF YOU HAVE AN PRUSA MK3, MK3S or MK3S+ IIT HEATS UP TO 160° FOR BED LEVELING, FINAL TEMPERATURE…
The angle template makes it easy to transfer any shape! The ledges can be added to as required. Variable adjustable into each other, the measuring unit is in cm. 5 ledges can be screwed together for storage. Print settings: Infill: 75% .…
Upload of my project from thingiverse since thingiverse has become trash! Unfortunately I can't upload .exe files here so you'll need to download it from the thingiverse page or directly through this line Introduction Project Goals I…
Zen Bridge and Temple. Print separately. Size to your preference.
After the great success of " Template For Electrical Diagrams ," I made a version for logic circuits. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/780713-template-for-flowchart-diagrams Template For…
Well I finally got around to doing this new much requested version of the Ayodhya Ram Temple. I did the first version when the schematics were made public in 2019 at the Kumbh Mela in Prayagraj. Now as the temple is due for inauguration…
I love the official models, but I also love to make custom-themed terrain pieces for whatever weird concept I have for an army. This can be hard with the weird shapes the company uses for these pieces, so here is a stencil project to help…
🇺🇸 Welcome to New York City! This model was created by MiniWorld3D member Trevor DePodesta (@coold3d4me ) www.cool3d4me.com The Empire State Building is one of the most iconic skyscrapers in New York City, the entire United States, and…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Modified model and g-code to work with PLA Silk 195c to 235c
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
Snowglobe ornament with raindeer, christmas tree, snowman and empty for your design If you like it --> press like it :-) Created a ornament for your christmas tree, which you can place at your fairylight and it will illuminate the scene…
A small figure sits in silence, ears tilted toward the stars and eyes reflecting a galaxy far larger than himself. This is no moment of adventure… only Grogu in stillness, carrying memories he cannot fully understand, of a Jedi Temple…
Gave that away as a birthday present to 7-year old twins....therefore I needed a sturdier version that could take some abuse. I basically combined chemteacher628 awesome BattleFleet version with yanew's parametric toolbox design and added…
Filament length Less than 3m Filament weight Less than 7g To save filament and time, the smaller the temperature tower, the better. 280~235℃ for ABS,PC,PETG 240~195℃ for ABS,PETG 220-175℃ for PLA,TPU The model is small, but the…
Digital numbers drawing template/stencil with side spacer. Multiple number size: 30mm/1.18in (x and y axis scaled to 60%) 50mm/1.97in (100% scale) 70mm/2.75in (x and y axis scaled to 140%) Other dimensions can be made by scaling the x and…
This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students. The template is designed so…
Automatically generate Gridfinity templates of any size in FreeCAD , the free and open source parametric modelling software available to anyone at no cost. Check www.freecad.org . The models correctly implement all features included in…
This is a template you can use for putting a GoPro mount into your designs
This is a recreation of the Hot Wheels retail packaging that the cars are sold in, minus the plastic blister that holds the actual car. I needed this for the display stand that I created to fit a 1:18 scale model, which can be found here:…
fashion figure XS: 170x195x2mm, height of body 180mm fashion figure L: 170x200x2mm, height of body 180mm fashion figure XL: 160x195x2mm, height of body 180mm THICKNESS OF THE PENCIL SPACE - 2mm Adjust the scale as needed.
Everyones favourite font now available in stencil form! Version 2 & Version 3 V2 has no numbers and only a few special characters. V3 Has all the numbers and special characters. Print at 0.2mm layer height, I would suggest using slower…
⛪ The Temple of Time ⏳ We have updated & improved this original model to have better detail & to make it easier to print. Watch how it was done on YouTube ! The original base model was created for MMU by MiniWorld3D collaborator artist…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Building on the awesome job of @Tronic with the Temp Tower, I have remixed one suitable for the Prusa XL. The supplied G-Codes are sliced using PrusaSlicer 2.6 Release Candidate 1 at 0.15 layer height using all stock Prusa Profiles for…
This A5-sized template helps you to draw perspective lines in an isometric view. Getting the perspective right can make or break a (product) drawing. This template helps you draw help lines every time. If you want an A4-sized version…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I like the template from @DavidHolecko_1339235, and…
Desktop and pendant lamp with cableholder function. Lamp shade inspired by the surface structure of the temple of venus and roma in italy. https://www.instagram.com/made3d.de/
Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius. The machine code is added to the printer profile with a suffix of TempChange. If you'd like to modify the text, you can add a new text shape with a font of…
TBH, this took me many iterations to get it the way I wanted it and so, I think it's a darn good overall stencil that is not too wobbly, creates clear numbers and letters, and is useful right after the print. The thickness of the stencil…
¡Saludos, comunidad de amantes de la impresión 3D en prntables! Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado…
EMPLOYEE BALLIN' FREE MODEL Models height ~ 5.1 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
Included is a ready-made gcode for Ender 3 V2 temp tower for PETG. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps. Comment out line 20 if you don't have BLTouch/CRTouch.
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Thank you for downloads, likes… Enjoy !
Wow, another awesome model from the guys over at https://3dwarehouse.sketchup.com/index.html Print instructions Category: 3D Printing Tests
I created this parametric OpenSCAD drilling template to help me mount an inset door into a cabinet using some Blum inset hinges. Adjust the “inset” variable in the OpenSCAD code to suite the thickness of your door. I've provided STL and…
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Temperature test for PLA, TPU, ABS and PETG
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Here is a Temp Tower for PLA 200 - 230, it is made for my P1P, I dont now if it also works for a X1C There are 2 files, 1 stl where you can set layer temps yourself, and one 3mf where I have set temps acording to the model.
Template for morse code letters
![[New Version!] Ayodhya Ram Temple - No Supports Required! Easy Print!](https://media.printables.com/media/prints/686627/images/5447169_6ce2d9fa-afe5-4c69-b8ff-a22d07ec5574_eb450b61-621b-4393-94a1-076cdae91e18/vfrt1.jpg)
![#0132 Sewing Pitch Template [3 versions]](https://media.printables.com/media/prints/809978/images/6321700_e3bc384d-6096-465c-b6cd-77099b1b2a16_9c1a9c83-a377-4e7d-b2f1-accad0ea64a7/20240324_131011.jpg)
