Counting matching models…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…
Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)
Remixed this lovely décor so it could fit into Prusa mini. Please note that the gcode files are enlarged by 15% compared to the supplied stl files. They are the largest possible print size fitting Prusa mini print bed.
I recently switched to Voron Stealthburner toolhead from Voron Afterburner. After that switch, I started to experience clogs and I assumed the clogs were a result of insufficient cooling of the Dragon hotend. Despite using a fan that…
Print with with support. It require some strenght, mine broke after failing, I suggest some additional perimeters, like 5 or 6. Original design from thingiverse, modified with tinkercad: https://www.tinkercad.com/things/9RNSQpH9oMA
Since the original clamps did not fit the German reusable bottles, I lengthened and widened the clamps a little. Now the
My smartwatch could not fit the original so I increased the distance for the adapter and the front side.
My Yeti mug now fits perfectly fine.
This allows for a larger cup / bottle to be used. This is designed to fit a 2016 Mercedes C-class but may fit other models. Allows a bottle / cup of uptown 96mm in diameter. The base fits into a original cup holder with a minimum size of…
This is my model of Qidi X-Plus/Max 3 Spool Holder Cap with enlarged flange which allows use of dryer box without the lid or without the box at all. It's useful when you want to print without the lid or like in my case you have wider…
fits in the cup holder and fits a larger cup. depending on your printer details it could not use support. the middle section is supported on ends, friendly to bridging. this surface is rairly seen. So cleanup remnants, or bridge remnants…
This filter holder slides onto the D shaft below the lens where the red safety lens usually is. Category: Parts
Larger wall cover for an HVAC lineset cover. This will fit a 3" kit.
I stretched the heigth of the cradle, so i could fit even the largest diameter Extrudr Spools (diameter up to 350mm), adapted the contour accordingly and added some aesthetically pleasing holes to spice up the walls. Print the part twice,…
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
Inspired by https://www.thingiverse.com/thing:1453407 , I decided to create more bases to be used for tabletop miniature size conversions. Perfect to use when your wizard casts Enlarge, but you don't have a upscaled miniature at the…
Digital photography has become mainstream, and film cameras have declined. As a result, the used market is full of obsolete enlarger lenses. Enlarger lenses often have good performance. However, the lens mount for the enlarger is…
Credits to SheepdogShaun . The original grip was too small for me to grab. I made it a little bigger to make it easier to grab.
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
Remade the hand knob part to make it larger, should provide more purchase for nuts that need to be a little tighter, will need to be printed with higher strength materials and high infill/wall loops.
I can't believe how tiny the player markers are in Pirates of Maracaibo. IT's super hard to see them when placed on cards, and super easy to lose them. So I created these which simply press together with a little friction. Solves both of…
NO ASSEMBLY OR DISASSEMBLY. The knob slides over onto the stock door knob. This enlarges the x1c door knob to roughly the same size as a door knob. This allows the door to be opened without any thought or effort.
Enlarged radio receiver box for Hobao Hyper VSE
Note: Please see my remix https://www.prusaprinters.org/prints/155787-prusabox-enclosure-enlarged-buck-converter-box-wit for an enlarged version of this same design to more easily fit all the wires with the relay in the lid. This is a…
This is an enlarged version of https://www.prusaprinters.org/prints/152385-prusabox-enclosure-buck-converter-box-with-wago-ho. When I put all the wires into the original design with the relay and all the GPIO wires, the box was very…
Created because original part didn't fit my single point sling's carabiner clip thingy. Use supports under the "bridge". 0.20mm layer height and regular PLA has held up fine for me, use thinner layers if you're worried about splitting
Scale moon lamp 146% in order to use with theese Bases. Link To Lithophane lamp= https://www.printables.com/model/23859
Converts your old analogue photo enlarger chassis to a copy stand for your DSLR digital camera. Inspired by the product “Copy Camera Adapter for LPL 7700 / 670XL Enlargers”, which apparently isn't available to buy anymore (and which was…
At the request of a friend, I enlarged the Mercedes F1 model by Sabu8. The model is in several parts, divided to fit on the Prusa MK3S printer, etc Due to the many elements, it may be difficult to assemble the whole thing. The model has…
Use these hole saw guides to easily enlarge an already drilled hole. Made these to aid with enlarging holes for new pot lights in my basement so I created a full set. If you like my models please follow me on insta @shorcodesign PETG…
Extended the base so the cute has a small gap between the printer. I also enlarged screw holes slightly
“krokus_flat_m39_mount” allows mounting an M39 lens directly on the enlarger. It is flat to allow a broader focusing range for 105mm lenses. You will need a recessed lens board for shorter lenses. I designed “krokus_recessed_m25_mount”…
enlarged bolt head for better grip
Attachments to enlarge the size of a Printbed Mini spool to better fit in dryer boxes and other storage. If you plan on using these in a heated dryer box, use PETG, ABS, or another material more resistant to heat than PLA. PLA will warp…
This is just a really quick model I threw together to enlarge my 35mm negatives. I couldn't find any negative carriers for 35mm online. This could probably use some refinement… Print using whatever settings you normally do, these don't…
Enlarged front tire for my Worx Landroid mower to stop in sinking and getting stuck in my thick uneven grass. Remixed from similar tire for Landxcape mower that it may also fit. Printed in TPU with 10% Gyroid infill. I found this nice and…
Motorcycle side stand extender/enlarger that prevents the small side stand contact surface from sinking to soft ground like hot asphalt, gravel or sand. The innermost diameter is 70mm, and the outermost diameter is 90mm. Print…
Enlarged the wallplate cover to cover a larger opening in dry wall. included step files for easy modification (124x80mm)
Wanting to combine two notebooks as I started running out of pages I enlarged the original 17mm rings to 27mm so doubling the amount of pages to 240. Included the original 17mm ring for variation and customizing your own notebooks.
This is a simple focusing adapter that I made for my Rodenstock Omegaron 150mm f/4.5 enlarger lens to be used with my Sony E-mount cameras. This particular enlarger lens has a 39mm diameter thread with 0.75mm pitch -- beware that many…
Having issues with microscopic slides shifting within my Foldscope 2.0 while panning, I needed something to keep the slides in place. I designed an adapter to fit snugly in the Foldscope. Here it is for you to download and print. The 3D…
This is a remix of https://www.printables.com/model/155787-prusabox-enclosure-enlarged-buck-converter-box-wit. The changes made were to add a square hole at the back of the case to allow using an external charger for the Raspberry Pi. I…
A really quick remix to enlarge the number of battery slots and types stored. Also rebuilt the base and lid to reduce its chunkyness
A frame for holding 6" contrast filters in a Beseler 45's condenser filter slot. Instructions Fits Ilford 6x6" contrast filters cut down for the curve. Printed in ABS using a Rostock Max v2. 0.25mm layers 1mm shell 0.5mm top/bottom 30%…
I received 4 rolls of 250g filament as a gift from (filalab), but these don't fit in the bambulabs AMS so I made a 2 piece spool extender. you can push into the center of the spool with a bit of tape so they fit securly. they are reusable…
If you don't like the smaller original stock ;) Fits tightly on my Umarex/Well MP7A1. Rails: https://www.thingiverse.com/thing:2837495 Flash hider: https://www.thingiverse.com/thing:2840337 Speedplate:…
This remix addresses two issues I had with the original model: My pencils were just slightly too tight of a fit in the pencil hole. I enlarged the hole in the model from having a 7mm width across flats to 7.25mm. These are Ticonderoga #2…
Markings for 35mm, 645, 6x6, 6x7, 6x9, and 4x5. Not well optimized for material use but prints nicely on its back with the markings facing upwards.
This is a model of the Omega Enlarger 6x7 mixing box. The original part is flimsy, and hard to find used. The model and dimensions were taken from a scan of the stock styrofoam box. The model can be used to print your own, or as a…
It is just a hacky remix of JamesK1 TS100 case to allow two additional tips for the miniware TS100 soldering iron. Print it without support. PETG works best. PLA is okay, if it is not a very brittle version of it. Use Filament or a 1.75…
Like many people we have some doors with warded locks which just don't look good and could be hard to operate by children, elder peolple and people with disabilities. So I decided to design this little helper. You are free to modify it,…
Printed in PETG on 70% infill It requires: 6x M4x8,5 Threaded insert 6x M4x10 INOX screw
I bought another enlarger lens to do a sharpness test between lenses but wasn't about to drop $50 for a used lens board. With some CAD magic and a few drafts, I was able to come up with this. This lens board is for M39 lenses and includes…
Lens hood for the El Nikkor Enlarger 50mm Lens
My Minolta enlarger came without film carriers for 35mm, so I made some! I thought I'd share the files on the off chance someone else out there has one of these. The files come in four parts: Upper and lower halves, and two guide rails.…
This spool enlarger can be screwed onto 250g mini spools in order for them to fit into the Bambulab AMS. Fits mini spools with the following measurements: Inner hole diameter > 50mm Spool width between ~ 38mm and ~ 47mm Outer spool…
35mm mask insert for nerioneg carrier for durst m305 enlargers. Helps hold the film flat with the carrier for easier enlarging. My company had sold an enlarger and relaised it didnt have the mask insert for the nerioneg carrier. so i…
One of my nicest 4x5 format lenses is a 150mm f/4.5 Rodenstock Omegaron, so when I saw a chance to buy a 210mm version very cheaply, I jumped on it. It's a beautiful lens intended for use on an enlarger. However, when it arrived, I…
Print No supports needed. Tested with PLA. Parts List 5mm x 5mm x 2mm neodymium square magnets CA glue Print instructions I recommend 15% to set the fill. Insert a pause on the layer that the magnet holes are covered to insert the…
X axis camera mount for Ender3 v3 KE. Compatible with the Trust Trino.
if you, like me, made the mistake of buying a replacement for the stock butterfly nuts and you have giant fingers this parts will help you to better adjust the bed leveling by enlarging the knob to a more suitable size. unfortunately i…
For use with the Omega Superchromega C760, normally it only comes with the 35mm light mixing box, this enables you to do medium format films. I modified the original one so it saves print time and material. The model might look weird in…
V2 Loch in der Mitte größer, zwecks Nachtropfen Verbreiterung für Senseo Switch, so passen 2 Tassen sicher auf die Abstellfläche Auflage_Verbreiterung ist für die originale Schale, aber wacjkeliger Auflage ist all-in-one, very rigid…
LOVE this design but I needed to wire my own LED strips with new connections and hide the connectors to keep a clean look. The current vertical light bars were not long enough for the LED strips I wanted to use with the new connectors.…
Filter holder for Meopta enlargers / Držák na červený filtr pro zvětšováky Meopta
A case to store/protect enlarger lenses. Has two M39 thread cells to keep the lnses. A snap on cap closes the case keeping the lenses free of dust. I don't provide cap locking, because this is a protective case and not aimed to transport.…
As explained in the originate Model at https://www.printables.com/model/333828-spincycle-keep-every-spool-dry-for-bambu-x1-p1p-am This model is designed to make storing and using your filament rolls easier if you print from the Bambu Labs…
This a replacement knob for MX Beseler enlarger to aid in focusing. It requires a focus whip.…
Remix of wilsondg's remix, changed amount of keystone inserts, one RG6 pass thru and one USB C pass thru, put small switch back. I am going to use the PI 4B and will run it with the USB C factory power supply plugged in the back. Later I…
Allows you to drill the 13mm hole right in the center. Just simply put tool on intake extension and use 13mm drill. Do not forget to mark the drill with 18mm depth sign.
Open VSlot 2020 Corner Bracket - 62.5x62.5x20mm fiting M5 button head screws
Updated to have more room for power supply wires. Moved WAGOs around made channel for usb and RJ45 cable to exit. Opened up lid for more room for power supply wire exit.
Replacement focus knob for Beseler Darkroom Enlarger series 35 and others that share the same part.
Added another WAGO holder, so now two 5 connector and two 3 connector. I hooked up 12V and 5 V pos and neg from buck converter for easy power hookup. Also included the lid (…
These files are for different stack heights for the lens mount for Dunco enlargers. Heights range from 3mm to 30mm Feel free to contact me with any questions or requests
I have three different lenses I use in my Beseler VC67 enlarger: a 50mm for regular 35mm film, a 75mm lens for 120-format film, and a 40mm for half-frame. I needed a place to store the two lenses that are not in use while the third is in…
I enlarged the file 400% and painted it in five colors in Prusa Slicer. Load file in Prusa Slicer and set colors Ext 1 Black, Ext 2 Dark Gray, Ext 3 Beige, Ext 4 White, Ext 5 Silver. I removed the base to allow the supports to work…
Druckinformationen: Material : ABS & PETG PLA ist zu brüchig für das Scharnier. Um die höchste Steifigkeit des Scharnieres zu erhalten, sollte mit einer Füllung von 100% in der möglichst feinsten Auflösung gedruckt werden.…
By creating the dice procedurally and enlarging them, we are able to guarantee the geometry of the digital model, and we are able to fairly well replicate that geometry as a print. These dice are great for casual game nights, D&D…
These are the files to make a condenser head for a De Vere 504 enlarger,
This is a precisely modeled replacement top mask for the Durst Sixma 35 negative carrier , commonly used in vintage Durst enlargers for 35mm film printing. The top mask is designed to fit snugly on top of the original Sixma 35 metal base,…
Remix of the customizable surprise egg from tmackay. It fits a normal hot wheels car and there are holes for 2 round magnets 3x5mm. I also made an embossed one for my kid, using tinkercad according to this tutorial
I wanted to enlarge the forward assist button on my Haenel CR308, basically an AR-10, a bit. The button is used to silently close the action while hunting - by just pressing it with my thumb. The larger area works well in this regard.…
A reduction/enlargement from a 70 mm hose to a 30 mm.
I needed to replace the battery for an SQ11 mini camera. Replaced with a much larger battery - needed a bigger case. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** .2 Infill: 10%…
Filter trays made to fit Ilford 8.9 black and white multigrade filters with Beseler 23C II compatible caddy.
Bigger funnel, textured handle, reinforced shafts with m3x40 and m3x25 socket head screws, beveled tamper blades.
the model allows you to extend the range of use of the IKEA "sittpinne" shoe tree from the original range 37-43 EU to the range 40-47 EU.
je l'ai imprimé en TPU pour diminuer le jeu https://www.aliexpress.com/item/1005003236433874.html?spm=a2g0o.order_list.order_list_main.33.4d4c5e5bDv8pJf&gatewayAdapt=glo2fra N'oubliez pas de poster vos photos de vos prints ça fait…
My Prusa XL PTFE Tube would not fit in original, scaled inlet a little
Lensboard for the Vivitar VI enlarger and 39mm lenses. You'll need a retaining ring, and depending on the printing material, you might need to spray flat black paint once or twice to avoid translucency. 4-5 top and bottom layers in black…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Cut a hole to big when putting in an outlet, do not worry. With this it provides an extra few centimeters of…
This model is and adapter for the Rolleimat Enlarger stand so it can take a cheap run of the mill tripod ball head. This way you can use it as a copy stand and scanner. Designed to be printed without supports. The insert for the nut is to…
This is a clip to attach the johnniewhiskey cable chain ( https://www.thingiverse.com/thing:2920060 ) to the X gantry, based on the design from ali1234 (https://cults3d.com/en/3d-model/tool/ender-3-extruder-mount-for-cable-chain). It is…
This is meant as a replacement part for the bottom negative stage plate for LPL 4500/7450 series enlargers. If you're somehow missing yours or it broke, this should be a direct drop-in replacement. You should print it in a black…
Adapter plate to mount a DSLR or any camera with a 1/4" screw to a polish krokus 35 enlarger BOM: ¼" 17mm screw with head diameter of up to 16mm M14x45mm hex screw ~25g of PLA doesn't need to be 45mm exactly 25% cubic infil
Made this because I have a few mugs that have wide bases that dont fit, and will fall off if unsupervised. Printed mine at 20% infill
The enlarged feet allow the enclosure to hang slightly off the edge of your desk, saving space while maintaining stability. This modification is perfect for those with limited desk space, as it helps to optimize your workspace without…
